Wheel width question......
I have a '96 C280 with the OEM 15X7's on it. I'm about to purchase Carlsson 1/6 evo's (diamond ed.) One configuration is to have 18x8's front and 18x8.5's on the rear. The other is to go 18x8.5's all around. Are 8.5's too wide for the front. I'd like to go 8.5's all around so I don't have to deal with 2 different tire sizes.
Any input would be appreciated! Thanks!
Next thing.....lowering it an inch. Any suggestions on an economical way to do this? I've seen Eibach springs for around $200 but have no clue on how much it costs to install.
You'll like the Kumhos. Don't expect more than 15000 miles out of them though. Eibach springs for $200? Where?? Installation will be around $150 and expect $90 for an allignment. You will need the camber adjustment bolt from the dealer as well. Get 4 packs for $7.50 each. Don't let people tell you that you can ride on your stock shocks. You Can't!!! (maybe if they are really new you can) I'd go with Bilstein Sport shocks or Koni Yellow Adjustables. Expect to pay $350 for a set of four. So let's total this up.
150+90+30+350=$620.00
Read this thread for more info.
https://mbworld.org/forums/showthrea...threadid=24386
Trending Topics
I was mistaken on the Eibachs. They are 275 for the pro kit at tirerack.
Thanks for the info!
The Best of Mercedes & AMG
1996 Pearl Black C280
Parchment Interior
Clear corners
Avantgarde Grille
Carlsson 1/6 Evos (18x8F, 18X9R)
----------
Coming soon:
Lowered 1.2inches!
Rieger or Erubuni body kit
Carlsson tags maybe =)
AdamsC280
Next project was to lower it but after seeing Doug's exhaust setup, I'm going that route next! Doug, is your car pearl black (a dark metallic charcoal color)? Looks the same as mine.
The wheels are on and I decided to replace the front rotors and pads while I was at it. Here's a link since I can't seem to figure out in-line images.
AdamsC280
Next project was to lower it but after seeing Doug's exhaust setup, I'm going that route next! Doug, is your car pearl black (a dark metallic charcoal color)? Looks the same as mine.
I just saw the same wheel/tire size setup installed on a C43 (same deal ffrom TireRack), with H&R springs... it looked SWEET. We were gonna take pics but I forgot.

-s-
Last edited by DougandhisC280; Feb 3, 2003 at 04:33 PM.
I've also seen the larger Carlsson badge for the truck lid but i'm thinking that may be too much. Any thoughts? Leave the trunk lid star with the Carlsson letters or de-badge the C280 and replace the trunk star with just the large Carlsson badge?
Here's a link to what they look like:
Carlsson Badges
Any thoughts?






