The History of Drexappeal's Ride (9/1/09 Post 1309 - Nitto INVO Tires Installed)
I was thinking about going there to take some pics tomorrow, but it's a bit of a drive for me, so might save that for when they're ready to put them on (especially cuz my tread is really low on my stockers).
I was thinking about going there to take some pics tomorrow, but it's a bit of a drive for me, so might save that for when they're ready to put them on (especially cuz my tread is really low on my stockers).
. Looking forward to seeing those wheels!flip
Looks like I'm doing the install next Saturday morning, so some of you will see the car in person at the GTG before I post the pics.
You should head out, man!
The Best of Mercedes & AMG
Check your email about some other ish.
btw, Replied to your email.
btw, Replied to your email.
Sorry guys, MH-Dezent grille is staying on for a Long time! I'm gonna look through some hardware stores to see if I can come up with a good solution for the top mounts.
http://www.cardomain.com/ride/826735
like you i couldnt find screws that fit the grille, what i ended up doing was using a smaller screw and something that screwed onto the screw from the top, i cant explain it, but basically since the screws didnt fit i used a bolt that screwed onto the screw to tighten it, not sur eif i made any sense whatsoever! but the bolts look like this:
http://www.tooled-up.com/artwork/ProdImage/1655M.jpg
i hope this helps!
http://www.cardomain.com/ride/826735
like you i couldnt find screws that fit the grille, what i ended up doing was using a smaller screw and something that screwed onto the screw from the top, i cant explain it, but basically since the screws didnt fit i used a bolt that screwed onto the screw to tighten it, not sur eif i made any sense whatsoever! but the bolts look like this:
http://www.tooled-up.com/artwork/ProdImage/1655M.jpg
i hope this helps!

The bottom brackets match up (kinda), but I'm gonna by some new U brackets for those and then screw in the OEM screws. It's a pain in the ***, but I'll figure out a good way to attach it. So far, my ghetto attachment is working though!

btw, Replied to your email.

Besides, hate to say it, but if you end up getting a L-A-D-Y (aka...ball and chain), you're gonna be spending WAY more money on that!...HAHAHAHA...Just playin', dawg.
Back to subject at hand, it'll definitely be worth the $$ for this mod. Lemme know when you're ready and I'll take care of it for you.
Drex
I am gonna try getting it to fit better with some clamps this weekend. Hopefully I'll have time to do that.
I called just to verify my appointment for Saturday to have everything installed, but Sander told me that the company sent them 1 wrong size for the front. So there are 2 19X10's, 1 19X8.5 and 1 19X9.5 at TWS!
Tires are all set to go. Sander seemed to be optimistic that we still might be able to do a Saturday install, but...I'm not.
So for those of you going to the GTG, you might not see my rims on yet. Sorry for the extremely long delay everybody. I'm sure you are anxious to see pics. Shoot, I'm just anxious to get them on and see whether or not I will need to use spacers (hopefully not) and to see what kind of rubbing I'll experience (if any).
Just had to update you all. Hopefully, the next time I post on this thread, it'll be with pics of everything!


