Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior Guides
- Mercedes-Benz C-Class: How to Remove Center Console Trim
Step by step instructions for do-it-yourself repairs
Browse all: Interior Guides
DIY: Audio 10 Install Pics / W203 ('01-'04) Center Console Removal Instructions
#126
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
See the pdf I have posted above - with all pics. Pics are lost from the forum - fortunately I pdfed before that happened
#127
So where are the pic's? I have this operation to perform now as I want to hook up a cd' changer to the single disc audio 10 headunit that's installed
#128
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Did you see post 115
https://mbworld.org/forums/attachmen...tructions-.pdf
https://mbworld.org/forums/attachmen...tructions-.pdf
#129
Yeah I managed to find them thanks they're great they'll sure save a lot of poking about and hoping for the best, all I need to do now is find somewhere to buy the fibre optic cable fitting to connect the cd changer .. cheers.
#137
Apart from gaining access to the headunit, does anyone know if fitting a mercedes cd changer in the glove compartment to the already installed Audio10 cd headunit is just like a plug and play? (fibre optic and power) or is there more involved once the headunit's accessable?? I just bought a 2002 C'class merc and want to add a changer .. all help gratefully accepted ..thanks
#139
#146
Junior Member
Join Date: Dec 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes C230 Coupe
+1 to the OP
Hopefully when I do my install with the AVIC I'll remeber to take some pictures during and post them up in my build thread.
I already have some pictures of the HU wires being wired to the wire harness if anyone is interested to see how I did it.
Hopefully when I do my install with the AVIC I'll remeber to take some pictures during and post them up in my build thread.
I already have some pictures of the HU wires being wired to the wire harness if anyone is interested to see how I did it.
#147
MBWorld Fanatic!
Join Date: Feb 2009
Location: fort worth, tx
Posts: 5,054
Likes: 0
Received 10 Likes
on
8 Posts
06 C230 SS 6spd
with our cars you have to make sure the acc power and constant are reversed on the harness. since the harness many use is the vw adapter harness the constant and acc are backwards. just make sure whats what with a voltage reader.
#148
Newbie
Join Date: Jun 2013
Location: Spain
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2003 C220 CDI Wagon (ES), 2002 C200 Kompressor (RSA)
I know that this is a really old thread but thank goodness it was here.
This really helped me to dismantle the central console to remove an old Alpine navigation system with a central vent mounted 6" display / TV unit. Just to look up the glove box removal now so that I can remove the cabling. The Main unit was located on the shelf in the glovebox and I couldn't figure out how to remove it until I had an idea to slide a knife above and below the unit - Hey Presto - no screws, just stuck with super German tape (Car was originally sold in Germany).
Now that I know how to dismantle and assemble the console I'm looking at a neater way of cabling my Garmin instead of having a big wire dangling across the dash.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Now that I know how to dismantle and assemble the console I'm looking at a neater way of cabling my Garmin instead of having a big wire dangling across the dash.
#150
MBWorld Fanatic!
If you have a factory amp connected to that fiber optic cable, you'll have no sound unless you manually wire all the speakers to the stereo. If your speakers were already wireed to the factory HU directly, you should be fine.