Reset Service light
ignition on, not running
Remaining miles to service displayed
Press and hold the dash reset pushbutton
(ask you do you want to reset)
Press and hold the dash reset pushbutton
DONE
Thank you.
The Best of Mercedes & AMG


At one point I think they didn't work
but you have to push it hard.also when you turn the key to on position you have to wait about 1 minute
Good Luck
I followed the directions in the PDF and it works great with one problem, when I get to the oil type menu it is set to "QF 1.0" and if I press the volume keys (or any others) they do not change that setting, the volume just changes... maybe my car only has one setting - "QF 1.0" ?
What is QF 1.0 ?
It's a 2005 C240 4-Matic
I also am having trouble right now with the Reset. I followed the directions in the PDF to a T and was able to remove the service B overdue message to service A in 13,000 miles. However, I started driving around and the 13,000 miles hasn't started ticking off. I have drove many miles and it keeps saying 13,000 miles. Additionally, I want it to say service B due again and not A. I tried repeating the steps to reset that I did in the first place and it keeps saying service A due in 13,000, not B. ANy ideas?
Thanks for your help anyway.
Final question: how often do you need to replace the cps?
Thanks for your help anyway.
Final question: how often do you need to replace the cps?
lol second i would replace with Mercedes battery because they last forever lol. alot of member on here have called roadside assistance and they will put the new battery in for the cost of the battery.2. Use the page button to select odometer readout in cluster.
3. Use the scroll button to display FSS indicator.
4. Press 'R' button on cluster for approximately 2 seconds.
5. Display in cluster will advise "to reset service reminder - press 'R' button for approx. 3 seconds.
6. Press 'R' button on cluster for approximately 3 seconds.
7. Service reminder is reset.
This worked for me.....2002 C240 base sedan....I do my own stuff. I was like 10,000 on it...saying overdue but I had done it twice lol...now I know how.. thanks











