W203 Part numbers
One simple Mercedes-Benz failsafe:
European part #'s do not show up on US MB Dealership computers, so they have no way to order them.
Been down that road more times than I care to remember...
Carlos

Saprissa@aol.com
and i will add these
W211 Mirror Blinkers
2038201421
2038201321
CLK55 AMG REAR Brakes
Rear Caliper AMG - left 003-420-29-83
Rear Caliper AMG - right 003-420-30-83
Rotor (x2) - 171-423-02-12
pads rear 004-420-49-20
Last edited by WaveyKat; Mar 25, 2008 at 10:09 AM.
The Best of Mercedes & AMG
CLK63 030 AMG BRAKES KIT
003-420-67-83 (Caliper) Front
003-420-68-83 (Caliper) Front
004-420-50-20 (Brake Shoe)
209-421-01-12 (Brake Disc) x2
003-420-29-83 (Caliper) Rear
003-420-30-83 (Caliper) Rear
004-420-49-20 (Brake Pad)
171-423-02-12 (Brake Disc) x2
Front Bar: 203-323-44-65
Front Bracket: 203-323-27-40 (x2)
Front Bushing: 203-323-22-85 (x2)
Rear Bar: 203-326-15-65
Rear Bushing 203-326-00-81




https://epc.startekinfo.com/epc/coverage.jsp
No excuses anymore to not look them up yourself...
if you still can't find it, or unsure, and have already spoken to a
dealer parts dept., then a post would be in order.




i might be "NOT SURE" doing this Mod.
C55 Exhaust System Parts List
MA203 682 46 71 Heat shield
MA203 682 47 71 Heat Shield
MA203 490 67 21 Exhaust
MA203 490 68 21 Exhaust
MA203 492 01 44 Rubber
MA203 492 04 44 Ring
MA203 490 00 40 Halter
MA203 610 04 75 Spare Wheel Tub <------
MA209 610 05 75 Spare Wheel Tub <------
MA203 682 46 71 Protection shield
MA211 490 00 41 Exhaust Clamp
MA203 490 03 41 Clasp
MA203 690 47 41 Lining
MA168 670 00 93 Epoxy
These rings secure the low beam bulbs in the headlight housing. I need both sides because I got these headlights off a member a while back and he took out the clamps to install HID's and decided to tape the bulbs down in the housing
I want to get these rings so I won't have to tape my bulbs down my lowbeam HID bulbs anymore
These rings secure the low beam bulbs in the headlight housing. I need both sides because I got these headlights off a member a while back and he took out the clamps to install HID's and decided to tape the bulbs down in the housing
I want to get these rings so I won't have to tape my bulbs down my lowbeam HID bulbs anymore
anyone??







