View Poll Results: Aftermarket Wheel Thread
W203
0
0%
CL203
0
0%
Voters: 0. You may not vote on this poll
W203/CL203 Aftermarket Wheel Thread - All you want to know
#3251
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
I got a couple questions that i need some help in.
I'm about to purchase a set of brabus mono VI replicas with tires that were on a clk w209 i believe. The tires are 235/35 ZR 19 front and 265/30 ZR 19 rear which i believe will fit even though the dealer said my 06 c will required smaller tires; but i have seen couple of people on this board with these set up.
However, since the wheels came from the clk, would the front offset won't clear my 06 brakes?
Another question, I lowered my car using tein basic and would 19s cause rubbing?
I'm about to purchase a set of brabus mono VI replicas with tires that were on a clk w209 i believe. The tires are 235/35 ZR 19 front and 265/30 ZR 19 rear which i believe will fit even though the dealer said my 06 c will required smaller tires; but i have seen couple of people on this board with these set up.
However, since the wheels came from the clk, would the front offset won't clear my 06 brakes?
Another question, I lowered my car using tein basic and would 19s cause rubbing?
Brabus recommand ET30 for 19x8.5 and ET35 for 19x9.5 or 10.
#3252
Alright, I want a set o' black ones. I think that right about when these are done I'll be needing new tires. The timing couldn't be better...
Hyper Silver
1) Blake P (confirmed)
3) mj50 (confirmed)
4) emrliquidlife (confirmed)
5) splinter (confirmed)
6) rdscklasse (confirmed)
7) c230Pilot (confirmed)
8) edtv82 (confirmed)
9) PheelinIt (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin...
-----
Hyper Maybe
1) anthuny85 (sell your wheels and get in!)
2) coin (FS: LM6s)
3) c230ftw (Need money)
Hyper Silver
1) Blake P (confirmed)
3) mj50 (confirmed)
4) emrliquidlife (confirmed)
5) splinter (confirmed)
6) rdscklasse (confirmed)
7) c230Pilot (confirmed)
8) edtv82 (confirmed)
9) PheelinIt (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin...
-----
Hyper Maybe
1) anthuny85 (sell your wheels and get in!)
2) coin (FS: LM6s)
3) c230ftw (Need money)
#3253
Thanks for all the help guys,
I guess they won't fit with such high offset.
That is really too bad because it was a good deal and i really like the look of those black replica mono VI
I guess they won't fit with such high offset.
That is really too bad because it was a good deal and i really like the look of those black replica mono VI
#3260
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
Did you read through the thread or search? It's been discussed (even in this thread). If you have a 2001-2004 luxury, you'll have to roll the fenders. If you have a 2004.5-Present Sport Sedan, it's the wrong offset on the wheels or wrong tire size (cuz the fenders are rolled from factory)
#3262
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Blake,
ET28 Front is very agressive and will be very close to the fender or even stick out a little bit. if you lowered it too much your fender will be pulled out. No point of having a coilover clearance if your fender gonna be messed up.
Try ET32, with an 8" width wheels. Tell them to reduce 0.5" from the back barrell of the wheels". This way you have a win2 situation - Clear the coilover (all the way down), BBK and not worry about messing your fender.
Just my .02 cents
D
ET28 Front is very agressive and will be very close to the fender or even stick out a little bit. if you lowered it too much your fender will be pulled out. No point of having a coilover clearance if your fender gonna be messed up.
Try ET32, with an 8" width wheels. Tell them to reduce 0.5" from the back barrell of the wheels". This way you have a win2 situation - Clear the coilover (all the way down), BBK and not worry about messing your fender.
Just my .02 cents
D
#3263
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
I know...the wait sucks.
Updated list:
Hyper Silver
1) Blake P (confirmed)
2) mj50 (confirmed)
3) emrliquidlife (confirmed)
4) splinter (confirmed)
5) rdscklasse (confirmed)
6) c230Pilot (confirmed)
7) edtv82 (confirmed)
8) PheelinIt (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin (confirmed)
-----
Hyper Maybe
1) anthuny85 (sell your wheels and get in!)
2) coin (FS: LM6s)
3) c230ftw (Need money)
Updated list:
Hyper Silver
1) Blake P (confirmed)
2) mj50 (confirmed)
3) emrliquidlife (confirmed)
4) splinter (confirmed)
5) rdscklasse (confirmed)
6) c230Pilot (confirmed)
7) edtv82 (confirmed)
8) PheelinIt (confirmed)
-----
Hyper Black
1) mzcloud (confirmed)
2) Eurowow (confirmed)
3) JonB C240 (confirmed)
4) AndySays (confirmed)
5) tozfeekum (confirmed)
6) mono (confirmed)
7) C24owner (confirmed - 8.5" all around)
8) toughguy (confirmed)
9) Stormin (confirmed)
-----
Hyper Maybe
1) anthuny85 (sell your wheels and get in!)
2) coin (FS: LM6s)
3) c230ftw (Need money)
#3264
#3267
guys i have a question i know that i shouldn't be asking as this has been discussed. But i need help to know for sure.
http://cgi.ebay.com/ebaymotors/18-BB...QQcmdZViewItem
these rims are 18x8 BBS rxII with 32mm offset. I have a cl203 with the c32 brake kit up front. To my knowledge i'd need a 5mm spacer upfront, but other than that would they fit?
http://cgi.ebay.com/ebaymotors/18-BB...QQcmdZViewItem
these rims are 18x8 BBS rxII with 32mm offset. I have a cl203 with the c32 brake kit up front. To my knowledge i'd need a 5mm spacer upfront, but other than that would they fit?
#3268
MBWorld Fanatic!
Join Date: Jul 2006
Location: Central Florida
Posts: 2,147
Likes: 0
Received 2 Likes
on
2 Posts
R129, XF Sportbrake, SC400
guys i have a question i know that i shouldn't be asking as this has been discussed. But i need help to know for sure.
http://cgi.ebay.com/ebaymotors/18-BB...QQcmdZViewItem
these rims are 18x8 BBS rxII with 32mm offset. I have a cl203 with the c32 brake kit up front. To my knowledge i'd need a 5mm spacer upfront, but other than that would they fit?
http://cgi.ebay.com/ebaymotors/18-BB...QQcmdZViewItem
these rims are 18x8 BBS rxII with 32mm offset. I have a cl203 with the c32 brake kit up front. To my knowledge i'd need a 5mm spacer upfront, but other than that would they fit?