View Poll Results: Aftermarket Wheel Thread
W203
0
0%
CL203
0
0%
Voters: 0. You may not vote on this poll
W203/CL203 Aftermarket Wheel Thread - All you want to know
06-14-2008, 02:53 AM
#5051
Junior Member
Join Date: Jun 2008
Location: Bochum / GERMANY
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2006 S203 C280 T
06-14-2008, 04:42 PM
#5052
Newbie
Join Date: Sep 2007
Location: Lacey, Wa
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
2002 C230 Coupe
MAE (O.Z. Racing) Crown Jewels with Kodiak lips and painted centers with Mercedes center caps.
Front
18x8.5 Et 32-15mm spacer = et17
Tire size 215/35/18
Toyo Proxy T1R's
I had to have the hub centric part milled out on the front, but the cars hub still extends, holding the wheel.
About 39mm shank on the lug bolt.
Rear
18x10.5 et52-12mm spacer = et 40
Tire size 235/40/18
About 34mm shank on the lug bolt.
Running tein coils, the fronts are all the way down now, the rears I have about a half inch left. The rear is rubbing right now on the fender, need to go in a few more millamenters and roll the fenders a tad. I havent measured but I belive I still have about half inch left on the inside of the car so I can move the rear wheels in a bit. Also going to raise it up a bit.
Front
18x8.5 Et 32-15mm spacer = et17
Tire size 215/35/18
Toyo Proxy T1R's
I had to have the hub centric part milled out on the front, but the cars hub still extends, holding the wheel.
About 39mm shank on the lug bolt.
Rear
18x10.5 et52-12mm spacer = et 40
Tire size 235/40/18
About 34mm shank on the lug bolt.
Running tein coils, the fronts are all the way down now, the rears I have about a half inch left. The rear is rubbing right now on the fender, need to go in a few more millamenters and roll the fenders a tad. I havent measured but I belive I still have about half inch left on the inside of the car so I can move the rear wheels in a bit. Also going to raise it up a bit.
06-14-2008, 05:11 PM
#5053
Super Moderator
MAE (O.Z. Racing) Crown Jewels with Kodiak lips and painted centers with Mercedes center caps.
Front
18x8.5 Et 32-15mm spacer = et17
Tire size 215/35/18
Toyo Proxy T1R's
I had to have the hub centric part milled out on the front, but the cars hub still extends, holding the wheel.
About 39mm shank on the lug bolt.
Rear
18x10.5 et52-12mm spacer = et 40
Tire size 235/40/18
About 34mm shank on the lug bolt.
Running tein coils, the fronts are all the way down now, the rears I have about a half inch left. The rear is rubbing right now on the fender, need to go in a few more millamenters and roll the fenders a tad. I havent measured but I belive I still have about half inch left on the inside of the car so I can move the rear wheels in a bit. Also going to raise it up a bit.
Front
18x8.5 Et 32-15mm spacer = et17
Tire size 215/35/18
Toyo Proxy T1R's
I had to have the hub centric part milled out on the front, but the cars hub still extends, holding the wheel.
About 39mm shank on the lug bolt.
Rear
18x10.5 et52-12mm spacer = et 40
Tire size 235/40/18
About 34mm shank on the lug bolt.
Running tein coils, the fronts are all the way down now, the rears I have about a half inch left. The rear is rubbing right now on the fender, need to go in a few more millamenters and roll the fenders a tad. I havent measured but I belive I still have about half inch left on the inside of the car so I can move the rear wheels in a bit. Also going to raise it up a bit.
06-14-2008, 05:12 PM
#5054
Super Moderator
I am looking at the AZA Z1 19" wheels at wheelmax but they dont have a size specific for a 2005 c class kompressor sedan. Any of you guys running on these shoes? can you give me an idea if the wheels will fit OR what measurements should I have?
My car is on stock AMG sport suspension with stock big brake calipers..well everything is stock. Thanks and I appreciate the help.
06-15-2008, 12:04 AM
#5056
Almost a Member!
Join Date: Jun 2008
Location: Vancouver, BC, Canada
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
05 C230SS
[QUOTE=rdscklasse;2871300]looks really good!
06-15-2008, 12:56 AM
#5057
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Nope, no new shocks yet, I will go with the stock shocks first, if they break or if the ride doesn't feel like I want it, I will get new shocks, and yeah, Koni yellows are the best I think...but as I said, stock shocks first - many guys over here use stock shocks with the 1,6"-lowering-H&R-springs, and they nearly all use stock shocks - and their rides feel great...
06-15-2008, 01:03 AM
#5058
Senior Member
Join Date: Jul 2007
Location: Scottsdale, AZ
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
'05 C230
Reps vs authentic smackfest again? Im just trying to get info on the wheels man.
They're like $1500 with tires and that is great value. Now if you or someone else is willing to sell me their SSR GT3s for the same price then I'd buy that instead of the reps.
They're like $1500 with tires and that is great value. Now if you or someone else is willing to sell me their SSR GT3s for the same price then I'd buy that instead of the reps.
06-15-2008, 02:27 AM
#5059
Almost a Member!
Join Date: Jun 2008
Location: Vancouver, BC, Canada
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
05 C230SS
06-15-2008, 02:44 AM
#5060
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
from the information you've given (19") I can't tell you **** and not going to bother searching for specs on that wheel for you.
some info you should list before asking would be 1. diameter and width 2. offset 3. size of the lip 4. bolt pattern.
06-15-2008, 03:04 AM
#5061
MBWorld Fanatic!
tires rubbing
Hey, got a question:
my front wheel is 19x8 +32 with a 5mm spacer, makes it a +27,
tire 235/35-Falken 452. At slower speeds, when i turn, the tire rubs the front of the wheel well (black plastic inner lining)
since its only an 19x8 should i have gotten 225/35 to make the sidewall a little more rounded. Right now its pretty straight. If i do get the 225/35 will this get rid of the rubbing? if i lower a little with coilovers, will it still rub or get better/worse?
im sitting on the stock 2005 sport suspension. what do you guys think??
Thanks..
my front wheel is 19x8 +32 with a 5mm spacer, makes it a +27,
tire 235/35-Falken 452. At slower speeds, when i turn, the tire rubs the front of the wheel well (black plastic inner lining)
since its only an 19x8 should i have gotten 225/35 to make the sidewall a little more rounded. Right now its pretty straight. If i do get the 225/35 will this get rid of the rubbing? if i lower a little with coilovers, will it still rub or get better/worse?
im sitting on the stock 2005 sport suspension. what do you guys think??
Thanks..
06-15-2008, 03:14 AM
#5062
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
Hey, got a question:
my front wheel is 19x8 +32 with a 5mm spacer, makes it a +27,
tire 235/35-Falken 452. At slower speeds, when i turn, the tire rubs the front of the wheel well (black plastic inner lining)
since its only an 19x8 should i have gotten 225/35 to make the sidewall a little more rounded. Right now its pretty straight. If i do get the 225/35 will this get rid of the rubbing? if i lower a little with coilovers, will it still rub or get better/worse?
im sitting on the stock 2005 sport suspension. what do you guys think??
Thanks..
my front wheel is 19x8 +32 with a 5mm spacer, makes it a +27,
tire 235/35-Falken 452. At slower speeds, when i turn, the tire rubs the front of the wheel well (black plastic inner lining)
since its only an 19x8 should i have gotten 225/35 to make the sidewall a little more rounded. Right now its pretty straight. If i do get the 225/35 will this get rid of the rubbing? if i lower a little with coilovers, will it still rub or get better/worse?
im sitting on the stock 2005 sport suspension. what do you guys think??
Thanks..
06-15-2008, 03:43 AM
#5063
Senior Member
Join Date: Jul 2007
Location: Scottsdale, AZ
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
'05 C230
before asking for info you should post more info on the wheels first.
from the information you've given (19") I can't tell you **** and not going to bother searching for specs on that wheel for you.
some info you should list before asking would be 1. diameter and width 2. offset 3. size of the lip 4. bolt pattern.
from the information you've given (19") I can't tell you **** and not going to bother searching for specs on that wheel for you.
some info you should list before asking would be 1. diameter and width 2. offset 3. size of the lip 4. bolt pattern.
Performance is not really a big deal for me, I just go for aesthetics, hoping for no rubbing issues and roads here in Phoenix is really not that bad.
18x8.5 (bolt 5x114.5) and 18x9.5 (bolt 5x20). offset is 40mm
19x8.5 and 19x9.5 (not sure bout bolt pattern but I can always buy bolts from another 3rd party seller right?) offset is 45mm all around.
-Offset can be changed as special request
-No tires yet coz I still dont know if these wheels will fit
-Should I get the 18s or the 19s?
Thanks again and I will give a review/feedback/update as contribution so it can be used as a future reference.
06-15-2008, 05:55 AM
#5064
Junior Member
Join Date: Jun 2008
Location: Bochum / GERMANY
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2006 S203 C280 T
...we allready installed some H&R springs and later on the H&R coilovers on my friend's R171, so that's no big problem for us/him... Can't really wait to get those wheels...
06-15-2008, 03:38 PM
#5065
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
Sorry bout that, first time to mod and replace a wheel. Anyways, Im trying to figure out the best way to go.
Performance is not really a big deal for me, I just go for aesthetics, hoping for no rubbing issues and roads here in Phoenix is really not that bad.
18x8.5 (bolt 5x114.5) and 18x9.5 (bolt 5x20). offset is 40mm
19x8.5 and 19x9.5 (not sure bout bolt pattern but I can always buy bolts from another 3rd party seller right?) offset is 45mm all around.
-Offset can be changed as special request
-No tires yet coz I still dont know if these wheels will fit
-Should I get the 18s or the 19s?
Thanks again and I will give a review/feedback/update as contribution so it can be used as a future reference.
Performance is not really a big deal for me, I just go for aesthetics, hoping for no rubbing issues and roads here in Phoenix is really not that bad.
18x8.5 (bolt 5x114.5) and 18x9.5 (bolt 5x20). offset is 40mm
19x8.5 and 19x9.5 (not sure bout bolt pattern but I can always buy bolts from another 3rd party seller right?) offset is 45mm all around.
-Offset can be changed as special request
-No tires yet coz I still dont know if these wheels will fit
-Should I get the 18s or the 19s?
Thanks again and I will give a review/feedback/update as contribution so it can be used as a future reference.
MB bolt pattern is 5x112. for 8.5 and 9.5 width to fit on the W203 you need ET27-30 for the front and ET35 for the rear.
06-15-2008, 08:09 PM
#5066
MBWorld Fanatic!
06-20-2008, 10:33 AM
#5067
Junior Member
Join Date: May 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
n/a
The fitment guide at http://www.alloywheelsdirect.net/inf.../mercedes-benz
shows multiple possible offsets for my car. Which ones are the stock 2005 SS specs for the standard 17x7.5 / 17x8.5?
F/R
36/30
36/34
37/30
35/30
37/34
?
shows multiple possible offsets for my car. Which ones are the stock 2005 SS specs for the standard 17x7.5 / 17x8.5?
F/R
36/30
36/34
37/30
35/30
37/34
?
Last edited by e34m20; 06-20-2008 at 11:55 AM. Reason: self discovery
06-22-2008, 03:37 PM
#5068
MBWorld Fanatic!
Join Date: Nov 2003
Location: Colorado Springs
Posts: 1,455
Likes: 0
Received 1 Like
on
1 Post
E55 AMG Black on Carlsson 1/6 EVO
New wheels again!!!!
Quick pic of my new setup HRE C21 Comp. My DPEs are for sale so PM me if your interested.
Last edited by Rareamg; 06-22-2008 at 04:28 PM.
but I like the step lip too...
06-23-2008, 12:52 AM
#5074
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
Wow, I thought your last set of wheels was perfect, but these take the cake! I think I want some HRE Comps, so we're going to have to talk. The step lips are gorgeous.
The step lips are gorgeous.
