





W203/CL203 Aftermarket Wheel Thread - All you want to know
https://mbworld.org/forums/wheels-ti...ck-vi-19s.html
Last edited by J.Christian; May 4, 2012 at 11:25 AM.
BBS LM's 17x8 et 45 front and et 42 rear with good tread tires (225/45/17) for $1250
or
BBS RS reps 18x8.5 18x9.5 et 35 front et 40 rear $1095 new + $$ for tires.
The Best of Mercedes & AMG
I say get the authentic roll on them and if you don't like, flip them for more.
for 9inch wide get min 29 offset or lower and for 9,5inch wide, get min 23 offset or even lower.
also dont forget to stretch tire+pulling fender
Last edited by Bill B C320; May 10, 2012 at 05:16 PM.

Front: 18x8.5 - 32mm.
Rear: 18x9.5 - 35mm.
http://www.ebay.com/itm/270912292976...84.m1423.l2649
Also, won't a 255 tire look stretched on a 9.5" wide wheel?
Car: 2002 C320 all stock
I want to get rims for the car. The current OEM's are horrible looking. I figured 18's would do fine. I am open to staggered or non staggered. Prefer non staggered so that I can rotate the tires. What size should I be looking for. So far this is what I got
66.6 Bore
5x112 bolt pattern
Non Staggered:
Rim: 18 X 8.5 for F/R - offset 25-38 - large range????
Tire: 225/40/18 - 245/40/18 - or do I need 35?
Staggered:
Rim: 18.5 F 25-38 offset ; 18x9.5 R 25-40 offset - large range???
Tire: 235/40/18 F - 265/35/18 R - size correct?
Please let me know how close I am here so I can order some rims/tires. I assume the low offset is being used to get the wheel flush? or is it necessary for not rubbing the suspension components on the inside of the rim? The car is stock height now, but I may lower it later slightly with some springs and do not want to roll the fenders. Thank you in advance for your help I really appreciate it. I will take pics and post up my results once I order and get installed to help the next person.
Perfect!!!! This is exactly what I needed to know for the 18's option. What about for 19's? I plan on purchasing as soon I know for the 19's so I know what to look for. Also is there any vendors that sell AMG replicas on this forum that you could recommend? I want a clean classy/sporty look. Thank you so much for your help!! I really appreciate it. I will definitely post of pictures with specs once they are on.

Front: 18x8.5 - 32mm.
Rear: 18x9.5 - 35mm.
http://www.ebay.com/itm/270912292976...84.m1423.l2649
Also, won't a 255 tire look stretched on a 9.5" wide wheel?

our coupe resemble the corrado in a way, so i want to achieve this same look. i want the wheel to push out and not be tucked under. That is why i want to go 17 max and not 18 bc i do want to lower the car. i want to avoid rolling the fender and be able to use spacers to achieve this same look.










