M271 header special...again!
#1
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
M271 header special...again!
KLEEMANN USA would like to announce a special on M271 headers for MBWorld members only. From now, until the end of March, all MBWorld members who reside in North America can purchase the KLEEMANN header for the unbelievably low price of $649.00 plus shipping. The header includes a down pipe with high-flow catalyst, factory exhaust gasket, new manifold nuts, flange hardware, and clamp. Installation is right around 2 hours, and no welding is required- simply cut your factory down pipe, and the KLEEMANN pipe clamps onto your stock pipe. Any questions, please email me- cory@kleemannusa.com or give me a call at 719.473.6441. To place an order, please call. The headers are in stock and ready to ship.
#2
MBWorld Fanatic!
C'mon all you whiney little M271 beeotches who say no one makes anything for your car...
put yer money where yer mouths are...hey, this + pulley + Kbox...yeh, NOW you're talkin'!
What a screamin' deal! I paid more for my SS header, without any built in Cat, and that was a buddy deal!
Cory, just curious, is this CARB approved? (not that it matters that much, like anyone around here worries about that. I passed, no idea if my header is approved or not. My emissions were low, as are yours likely to be)
put yer money where yer mouths are...hey, this + pulley + Kbox...yeh, NOW you're talkin'!
What a screamin' deal! I paid more for my SS header, without any built in Cat, and that was a buddy deal!
Cory, just curious, is this CARB approved? (not that it matters that much, like anyone around here worries about that. I passed, no idea if my header is approved or not. My emissions were low, as are yours likely to be)
Last edited by C230 Sport Coup; 02-17-2009 at 03:28 PM.
#4
MBWorld Fanatic!
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
AAAAAAAAACK! ! ! I cannot pass this up ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
. . . I will be putting my order in asap! Do you accept money order? Or can I order through my local shop here in San Diego and still get this discount?? (namely Group5 motorsports).
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#5
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
You have to order directly through KLEEMANN USA to get this deal. If you'd like to send a money order, that's fine, but it has to clear the bank before I can ship. We are also accepting paypal if that's easier for you- just let me know. If you have any questions, just email me cory@kleemannusa.com, or give me a ring.
#6
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
C'mon all you whiney little M271 beeotches who say no one makes anything for your car...
put yer money where yer mouths are...hey, this + pulley + Kbox...yeh, NOW you're talkin'!
What a screamin' deal! I paid more for my SS header, without any built in Cat, and that was a buddy deal!
Cory, just curious, is this CARB approved? (not that it matters that much, like anyone around here worries about that. I passed, no idea if my header is approved or not. My emissions were low, as are yours likely to be)
put yer money where yer mouths are...hey, this + pulley + Kbox...yeh, NOW you're talkin'!
What a screamin' deal! I paid more for my SS header, without any built in Cat, and that was a buddy deal!
Cory, just curious, is this CARB approved? (not that it matters that much, like anyone around here worries about that. I passed, no idea if my header is approved or not. My emissions were low, as are yours likely to be)
#7
MBWorld Fanatic!
so whats that mean exactly that if you like lived in cali or something you couldnt have this on your car?
Im j/w b/c I may be stationed in California in less than 2 years and I don't wanna drop $1000 after shipping and install for something i cant use!
Im j/w b/c I may be stationed in California in less than 2 years and I don't wanna drop $1000 after shipping and install for something i cant use!
Trending Topics
#8
MBWorld Fanatic!
once my next paycheck is on, i'm ordering...
btw... are the pulley & k-box still on back order?
Last edited by Midnight Koop; 02-17-2009 at 10:18 PM.
#10
MBWorld Fanatic!
The trick is, will anyone (like police or Ins. co) notice it and make you put it stock?
So, you just need to not be tooo obvious or push things too far.
I passed smog, and in fact the guy stated, that my emissions were below normal.
I would bet that as the Kleeman header has a Cat just like the stock one, you would be fine as far as the
actual readings.
Your smog guy may, or may not ask if you have the header has a CARB cert.
He may not notice that it's not the stock part, he'll just check to make sure the 2nd cat is there.
And just to be sure, you could be creative...what do you see in picture below Grasshopper?
Thats right....nothing....
Nothing to see, no questions to ask.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Can't wait to see, who's gonna be 1st?
![](https://mbworld.org/forums/attachments/c-class-w203/122267d1200877670-smog-check-hideaheader.jpg)
Last edited by C230 Sport Coup; 02-18-2009 at 01:28 AM.
#11
MBWorld Fanatic!
Again a picture on the M271 Engine headers:
So you guys can have sleepless nights ;-)
![](http://www.mijnalbum.nl/Foto-IFALTULA.jpg)
And guys come on, $ 649,00 thats a hell of a good price...... thats about 520 in €uro, so i have paid to much now
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#13
MBWorld Fanatic!
#14
Edit: Ask some guys in your unit who were stationed in Cali if they tested everyone or not.
#18
MBWorld Fanatic!
Wasn't there a manifold cover on the stock manifold?
hint hint....the point isn't what engine.
You missed the point.
This stayed on just long enough...likely the aluminum clip that held it in place would melt under normal conditions. Like I said, my emissions were low.
![](https://mbworld.org/forums/attachments/c-class-w203/122268d1200877714-smog-check-100_1610.jpg)
hint hint....the point isn't what engine.
You missed the point.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![](https://mbworld.org/forums/attachments/c-class-w203/122268d1200877714-smog-check-100_1610.jpg)
But that isnt a M271 engine.... by the M271 Engine you will see it, but only if you know the difference. Otherwise you think it's stock!!
Again a picture on the M271 Engine headers:
So you guys can have sleepless nights ;-)
![](http://www.mijnalbum.nl/Foto-IFALTULA.jpg)
And guys come on, $ 649,00 thats a hell of a good price...... thats about 520 in €uro, so i have paid to much now
.... but i'm happy with it....
Again a picture on the M271 Engine headers:
So you guys can have sleepless nights ;-)
![](http://www.mijnalbum.nl/Foto-IFALTULA.jpg)
And guys come on, $ 649,00 thats a hell of a good price...... thats about 520 in €uro, so i have paid to much now
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
Last edited by C230 Sport Coup; 02-18-2009 at 11:20 AM.
#19
MBWorld Fanatic!
#20
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
#21
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Correct. You will almost certainly fail the visual inspection, which means you fail the entire emissions test.
#22
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
#23
Former Vendor of MBWorld
Thread Starter
Join Date: Jul 2002
Location: Colorado
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
#25
MBWorld Fanatic!