203 wheel LUG bolts / torque / pattern / sockets - All you want to know
#326
MBWorld Fanatic!
Join Date: Mar 2003
Location: Chino Hills, CA
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
2008 C300 Sport
I've done it before numerous times, never had a problem either. Just check and re-torque them after driving around some miles like others have said.
#327
Out Of Control!!
Hey, Blake - found the original set of 10 bolts; the ones from the OZ rims must be in the car; will look tomorrow and let you know.
#328
MBWorld Fanatic!
Join Date: Nov 2003
Location: Fresno, CA
Posts: 4,278
Likes: 0
Received 0 Likes
on
0 Posts
'09 A4 S Line
#329
Almost a Member!
Join Date: Jan 2007
Location: New York
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
2002 Mercedes-Benz C240 sedan
Lug bolts question
I'm searching for 12x1.5x20mm lug bolts. Can't find them anywhere. I can only find RAD wheel locks in that size. Weird they don't make the lug bolts in the same size. Can I use locks all around?
#330
MBWorld Fanatic!
buy some that are a shade long, run a nut down them to use as a straight edge and cut them off to your desired length. lightly sand down the ends and you are good to go.
i'll check my stash to see what i have when i get home. i've got a couple sets, unsure of the size off hand though.
i'll check my stash to see what i have when i get home. i've got a couple sets, unsure of the size off hand though.
#331
Senior Member
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Here's a site where I bought my bolts. http://www.ezaccessory.com/Lug_Bolts_s/20.htm
They may not have the exact size you're looking for but per bumpnzx3 :"cut them off to your desired length".
They may not have the exact size you're looking for but per bumpnzx3 :"cut them off to your desired length".
#333
Senior Member
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
I have 10 pc Chrome 12 X1.5 X 27mm 17mm HEX 54mm length BALL SEAT. MINT!!
You can have it for FREE or ANYBODY out there who wants it can have it.
1st come 1st serve.1ST PM gets it. Just pay for Shipping.
I tried to sell it on eBay 3x with no luck..
Used it for 2 weeks before upgrading from 8mm to a 10mm spacer.
You can have it for FREE or ANYBODY out there who wants it can have it.
1st come 1st serve.1ST PM gets it. Just pay for Shipping.
I tried to sell it on eBay 3x with no luck..
Used it for 2 weeks before upgrading from 8mm to a 10mm spacer.
#334
Senior Member
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
WHERE'S MY NUTS???!!!!
Friday afternoon: I was washing my rims and lo and behold I have one lug bolt missing(rear wheel drivers side).
Where could it be?
I had some service done last week for tire replacement so I went back to the shop today & they told me it was already missing as noted by the mechanic.
I had the tires balanced a month ago at the same place & nobody mentioned a missing bolt then.
Stolen maybe? Where I work is very safe. Why just one?
I say, the last guy worked on it probably lost it & just noted on his sheet that it was missing to cover himself...a possibility or I was driving with a missing 'nut' for a month.
Car was running fairly smooth after it was balanced last month...and now it vibrates a little @ 45 mph +.
Manager offed to pay for it but it's only $1.89 online & I ordered 3.
Where could it be?
I had some service done last week for tire replacement so I went back to the shop today & they told me it was already missing as noted by the mechanic.
I had the tires balanced a month ago at the same place & nobody mentioned a missing bolt then.
Stolen maybe? Where I work is very safe. Why just one?
I say, the last guy worked on it probably lost it & just noted on his sheet that it was missing to cover himself...a possibility or I was driving with a missing 'nut' for a month.
Car was running fairly smooth after it was balanced last month...and now it vibrates a little @ 45 mph +.
Manager offed to pay for it but it's only $1.89 online & I ordered 3.
#335
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
YOU GOT OUR ATTENTION.
Now that you sorted your nuts from your bolts![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
I'll bet on your tyre shop - One more for their collection of 1000s
Now that you sorted your nuts from your bolts
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
I'll bet on your tyre shop - One more for their collection of 1000s
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#336
MBWorld Fanatic!
#338
MBWorld Fanatic!
Join Date: Jan 2006
Location: Pasadena, CA
Posts: 3,206
Likes: 0
Received 6 Likes
on
5 Posts
2002 C230K, 2013 BMW 328, 2015 BMW X5
Wait, so the tire shop noted you were missing the bolt, but failed to tell you verbally?
HUGE SAFETY issue.
I'd be hella mad. This coming from someone who has lost a wheel on the freeway once. It is no picnic.
Imagine all the vehicle dynamics that you have grown a custom to being completely gone. Stopping a three wheeler and moving over safely is all in God's hands.
HUGE SAFETY issue.
I'd be hella mad. This coming from someone who has lost a wheel on the freeway once. It is no picnic.
Imagine all the vehicle dynamics that you have grown a custom to being completely gone. Stopping a three wheeler and moving over safely is all in God's hands.
#339
Senior Member
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
Wait, so the tire shop noted you were missing the bolt, but failed to tell you verbally?
HUGE SAFETY issue.
I'd be hella mad. This coming from someone who has lost a wheel on the freeway once. It is no picnic.
Imagine all the vehicle dynamics that you have grown a custom to being completely gone. Stopping a three wheeler and moving over safely is all in God's hands.
HUGE SAFETY issue.
I'd be hella mad. This coming from someone who has lost a wheel on the freeway once. It is no picnic.
Imagine all the vehicle dynamics that you have grown a custom to being completely gone. Stopping a three wheeler and moving over safely is all in God's hands.
HUGE SAFETY issue I agree. I can be missing more than 1 'nut' & not know it.
I'm mad but what can you do? Just couldn't get how it will just go missing.
Last edited by danev6972; 06-13-2009 at 06:19 PM.
#343
Senior Member
Join Date: Sep 2006
Location: FLORIDA
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
2003 C240
#344
MBWorld Fanatic!
#345
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
#346
MBWorld Fanatic!
Join Date: Oct 2007
Location: SF Bay Area, San Diego
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
C320 coupe
#347
MBWorld Fanatic!
Join Date: Jan 2005
Location: Orange County
Posts: 2,848
Likes: 0
Received 15 Likes
on
15 Posts
2005 C Wagon (No snickering please!)
A mental hospital near me has a full size theater. Once I took a print to show the staff and patients. Leaving the lot a patient behind the fence called me and pointed to my wheel. He thanked me for showing the film and told me I had only three nuts holding the wheel. I said, what should I do? Call AAA? He said no, just take a nut off the other wheel and put it on this one. That way you'll have at least four on each wheel in the front. I took the nut off and put it on the other wheel. I thanked him and said that was pretty smart, what are you doing in here? He said "I'm not in here because I stupid, I'm here because I'm crazy.
My dity bag has two sets of nuts. Makes me walk proud. One set for the Ronal alloys, and one shorter set for the spare. It also has a belt, filters, oil, brake fluid, a thimble of PS fluid, lamps, and distilled water.
My dity bag has two sets of nuts. Makes me walk proud. One set for the Ronal alloys, and one shorter set for the spare. It also has a belt, filters, oil, brake fluid, a thimble of PS fluid, lamps, and distilled water.
#348
Super Moderator
I’m with emrliquidlife on this one. Where was their fiduciary duty?
When working on my sister’s VW brakes while a preteen, I inadvertently neglected to properly torque its wheel lugs. Goes without stating the obvious that it was soon planted forlornly on the macadam about a mile from our driveway. Mom claimed she thought I’d intended to kill a kin. Although my sister(s) may have seemed to deserve it at times, actually doing so never entered my consciousness.
Been a damn stickler for verifying my automotive mechanical tasks ever since then. They’re not to be trifled with when the lives of its occupants or innocent passersby rely on doing things correctly.
/sermon
edit: swell Eagle Scout dity bag you carry, Moviela.
When working on my sister’s VW brakes while a preteen, I inadvertently neglected to properly torque its wheel lugs. Goes without stating the obvious that it was soon planted forlornly on the macadam about a mile from our driveway. Mom claimed she thought I’d intended to kill a kin. Although my sister(s) may have seemed to deserve it at times, actually doing so never entered my consciousness.
Been a damn stickler for verifying my automotive mechanical tasks ever since then. They’re not to be trifled with when the lives of its occupants or innocent passersby rely on doing things correctly.
/sermon
edit: swell Eagle Scout dity bag you carry, Moviela.
#350
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
The wonderful world of Scouts. My late uncle - Charles Ruck - was head of the Scouting movement for Canada.
Last edited by Glyn M Ruck; 06-14-2009 at 06:45 AM.