





C-Class SMOKED Tail Lights - All you want to know
i dont want to use the spray though i know that, i was thinking about finding a pre-cut layover kit, but had trouble.. someone said they bought theirs off ebay? whatd you search as because i couldn't find them =(.
i was also just thinking about taking the 35% tint roll i have and cutting them out myself, would that work?
i dont want to use the spray though i know that, i was thinking about finding a pre-cut layover kit, but had trouble.. someone said they bought theirs off ebay? whatd you search as because i couldn't find them =(.
i was also just thinking about taking the 35% tint roll i have and cutting them out myself, would that work?
it was really tough with those curves on the tails....as we thought it would be. I used vinyl smoke tint, and made my own tint solution with a hair dryer. I also did the mirror blinkers too, the car is coming along just fine, next up, coilovers and brabus lip kit...finally!Here is the shot with some light going into the tails.

Here's the shot without light.

Here's the shot with the trunk

Let me know what you guys think!
Last edited by c230kracer; Jul 17, 2009 at 04:04 AM.
The Best of Mercedes & AMG
There you go
I am wondering if it is best to lightly sand the light first and then spray the first coat, or to spray a coat and then sand the light.
Also what is the best sand paper to use 600?
Thanks for the help
The grille is plastic with a layer of chrome on it. i snded mine down, several coats of primer and instead of using the flat or gloss paint, there is a new rubberized paint on the market. this way it will not chip when rocks/sand/etc hit it
The grille is plastic with a layer of chrome on it. i snded mine down, several coats of primer and instead of using the flat or gloss paint, there is a new rubberized paint on the market. this way it will not chip when rocks/sand/etc hit it
but here they are
here are the pre-tinted for comparison:
https://mbworld.org/forums/attachmen...90710-1114.jpg
https://mbworld.org/forums/attachmen...90630-1337.jpg
Last edited by eesjunin; Jul 29, 2009 at 08:05 AM.
I know I need to sand the lights prior to spraying, just wondering what sand paper ppl used on theirs? I have been reading around some say 600 some say 800.
Also after the first coat what is best sand paper to use?
Please help
Thanks
I know I need to sand the lights prior to spraying, just wondering what sand paper ppl used on theirs? I have been reading around some say 600 some say 800.
Also after the first coat what is best sand paper to use?
Please help
Thanks





