Does C32 Brake rotor fit into C200K
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 32
Likes: 0
From: Melbourne, Australia
W203 - C200 Kompressor
Does C32 Brake rotor fit into C200K
Hi all,
I have C200K with sport package (2 pistons caliper & 330mm brake rotor). At the moment I need to change my Brake rotor.
I was just wondering if C32 Brake rotor (345mm) would fit into my car.
Please I need your help,, I believe all of you guys here got more experience than me
I have C200K with sport package (2 pistons caliper & 330mm brake rotor). At the moment I need to change my Brake rotor.
I was just wondering if C32 Brake rotor (345mm) would fit into my car.
Please I need your help,, I believe all of you guys here got more experience than me
Last edited by octadaud; Dec 13, 2009 at 05:38 AM.
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 32
Likes: 0
From: Melbourne, Australia
W203 - C200 Kompressor
Thanks for the answer,,, But are you able to give the link to that thread??? I'm still confused coz my friend told it would fit...
MBWorld Fanatic!
Joined: Feb 2009
Posts: 5,537
Likes: 8
2006 C350 Sport 6MT
MBWorld Fanatic!
Joined: Feb 2009
Posts: 5,537
Likes: 8
2006 C350 Sport 6MT
It might work. Since the new rotor is bigger that means it wont hit the center of the rotor. But it the new rotor was smaller it will hit the center of the rotor (caliper).
The difference is half an inch. It might work but I just hope you don't get any problems with the rotor not being perfectly even.
The rotor might also hit the caliper (inside part)
The difference is half an inch. It might work but I just hope you don't get any problems with the rotor not being perfectly even.
The rotor might also hit the caliper (inside part)
Last edited by W203E35; Dec 13, 2009 at 06:07 AM.
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 32
Likes: 0
From: Melbourne, Australia
W203 - C200 Kompressor
It might work. Since the new rotor is bigger that means it wont hit the center of the rotor. But it the new rotor was smaller it will hit the center of the rotor (caliper).
The difference is half an inch. It might work but I just hope you don't get any problems with the rotor not being perfectly even.
The rotor might also hit the caliper (inside part)
The difference is half an inch. It might work but I just hope you don't get any problems with the rotor not being perfectly even.
The rotor might also hit the caliper (inside part)
MBWorld Fanatic!
Joined: Dec 2005
Posts: 1,055
Likes: 50
From: SoCal. Desert
'16 E350, gone: '03 c230k
Just posted a reply on the brake thread. Karo has it covered, and yes I'd be concerned about the caliper being able to clear the rotor (that extra 1/2" might make the rotor stick out too far for the caliper to bolt up). Best of luck with it!
Trending Topics
Thread Starter
Junior Member
Joined: Jun 2009
Posts: 32
Likes: 0
From: Melbourne, Australia
W203 - C200 Kompressor
Yup,,, I am going there now.....
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
