So just wondering if anyone actually owns a set of these for our w203's and if they have actual pics with them installed...

i wanted to get them once.. i think they look sexy...

ya i agree...but i want the ones that say c-class not MB like they have on alot of the other models...

the coupe sills are rare and only formymercedes sells them apparently.. however for your sedan, you have many choices, try formymercedes & ebay... C-class sounds "bad", id stick with mercedes-benz, or amg/brabus if you have their mods....

Check this thread. http://mymbonline.com/forum/viewtopic.php?t=22742
The 2nd to last post is what i did to retrofit the standard EL door sills i bought from formymercedes.com to make it look more OEM-like.

custom FTW

ya read it and not really understand what he did...did he already have a set that died and then just parted out from that or what exactly...like where did he get the plastic cover to cover the dremeled out lettering from the stock sills...

all you nee is plexiglass to cut out, dremil tool, glue, led thing and some time, i am so going to do this once i find the led thing.

This is exactly what I used to have installed. Its a chrome sill plate surround that mounts directly over your stock door sill trim.

The LED light plate sits underneath the lettering that you see and the lettering itself can also be removed.

i have the same one too for the past 4 years :-)... check "for my mercedes dot com"

it sticks to the top of your stock sill? yikes that sounds cheap...especially for $280 or w/e they want for it nowadays.

I have the same exact ones MbzC230K has, although I chose not to install the additional blank sill because I figured it'd get scuffed up easily. I got them from formymercedes, and installed them right after I got my car in November 2006. Haven't had any issues whatsoever, and it's a mod EVERYONE always compliments me on.

As for these sticking on top of the original sills....I too thought it would look cheap, but after installing them, they look really good and very much OEM-like. Back many years ago, there was someone on here who would modify the "Mercedes-Benz" logo on the existing door sill to make it EL, but I think his company went under. Still, these from formymercedes are definitely high quality and worthy of your C-Class.

Cintoman

does anyone have pics of theres showing where the stick on goes exactly? how big is it? does it cover the entire oem sill? where does the wire to power it go?

whats it use? just 3m two sided tape or something?

so just ordered them from mymbonline...should be here tuesday or wednesday...hopefully a smooth install...might have to employ the g/f... no choice unfortunately

Yes, it comes with the double side tape that is ready to go. just peel and stick. It also comes with a small digital power box that needs to wired into the electrical before you stick the sill on. The shoddy red rectangles highlighted in the pic shows where the tape is and the red arrow notes that the entire underside area has double side tape already. I recommend using a lubricant spray so you have a little playtime to align everything before the tape settles into place. GL!

LOL...WTF?
BAN!!

i dont need lubricant...sorry...lol

so I began the install of these puppies today and of course ran into my share if issues...

1) the directions on there website are retarded - written by one of their customers who calls the provided strand of wiring a "transformer?" took me a minute to figure out wth he wanted me to wire the "LED logs" to that was a "transformer?"

2) Driver side goes on pretty much identical to the directions, good power, and turns on and off with the door ajar button thing...however now the driver side "one-touch" window feature won't work in the up direction. Apprently the constant power supply the instructions asked to tap into was the power supply to the window regulator. But why the up "one touch" feature ceases to work baffles me.

3) Couldn't get any power to the passenger side. It's identical to the driver side and all my taps are making contact with the wiring itself but still no power. Can't figure out for the life of me whats the dilio (plus i believe i blew a fuse in the process b/c now that window doesn't work at all and the light under the switch for the window on the passenger side is out) go figure.

4) anyone got any thoughts to this?

Sorry for the crapy iphone foto...doesnt do so hott at night but at least this shows i did get at least one of the 2 working...

i read the instructions on the FMM website for the C class but it's not easily
discernable, presuming you used these instructions, why it is/n't functioning
properly....as well as the inop statuses of your windows/lighting. are these
the instructions you used?

no no i used the one for the sedan...
http://www.isynergyinc.net/mb/sill/
these are stick on that calls to tap into the power window power supply.

Pictures of final install....still cant get front passenger to work...gonna tinker with later and test out some other live wires

They look good. Reminds me too much of indiglow gauges though. Lol.

ya they dont glow that much...just the effect on the camera...couldnt find the settings on it to change that but oh well...i like it alot...