DIY: Hid Convert Kit Install - VVME product
#101
MBWorld Fanatic!
i get it eventually for both...sometimes just one...and they dont always turn off and sometimes they will turn right back on...its hard to tell sometimes but i try and watch in the rear bumper of cars im following...like today it is raining so i had them on and after like 2 minutes the left one said it was off and i think it switched off for a split second and then back on which is why the error code came up.
#102
MBWorld Fanatic!
it's possible that you've got a bad set of lights.
It would be nice if you could swap with other set of working lights.
It would be nice if you could swap with other set of working lights.
#104
MBWorld Fanatic!
and i just bought some of those error elimnators from ddm to see if those will fix this. Although I dont see why they should. I have xenon set to present and other people with this issue haven't had these issues with there vvme. If it still persists I will send back to vvme.
#105
MBWorld Fanatic!
maverik, if the headlights you got are bad to start with, no matter what you do, they will not work properly. New parts can go bad... even new parts from MB also go bad or don't fit properly... it's rare but it happens.
If I were you, I would contact the seller and ask them for replacement after explaining what the problem is. They may just ship a replacement set.
If I were you, I would contact the seller and ask them for replacement after explaining what the problem is. They may just ship a replacement set.
#107
Junior Member
Join Date: Sep 2010
Location: US DE Lewes
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
e350 09
maverik, if the headlights you got are bad to start with, no matter what you do, they will not work properly. New parts can go bad... even new parts from MB also go bad or don't fit properly... it's rare but it happens.
If I were you, I would contact the seller and ask them for replacement after explaining what the problem is. They may just ship a replacement set.
If I were you, I would contact the seller and ask them for replacement after explaining what the problem is. They may just ship a replacement set.
dude, i suggest you switch the bulbs to check whether it is the problems of ballast or the bulbs....
Check your wiring first before cursing seller. Have to triple check, because i see so so many people just going with a stock wiring harness or using skinny wires or using crappy bulbs or not soldering connections and then complaining about bad HID. There are steps to take before you know exactly whats wrong with them.
whether you reverse the wires, whether you fix the ballast by relay to make sure the ballast work well when starting up.....
only my personal ideas....
#109
Super Member
Thread Starter
Join Date: Jul 2010
Location: Cali
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
2006 C230 Sedan
it is not a smart way to ship back the defective one and ask them for a replacement cos you need to afford the shipping ( it is not cheap for the shipping from china , man)
dude, i suggest you switch the bulbs to check whether it is the problems of ballast or the bulbs....
Check your wiring first before cursing seller. Have to triple check, because i see so so many people just going with a stock wiring harness or using skinny wires or using crappy bulbs or not soldering connections and then complaining about bad HID. There are steps to take before you know exactly whats wrong with them.
whether you reverse the wires, whether you fix the ballast by relay to make sure the ballast work well when starting up.....
only my personal ideas....
dude, i suggest you switch the bulbs to check whether it is the problems of ballast or the bulbs....
Check your wiring first before cursing seller. Have to triple check, because i see so so many people just going with a stock wiring harness or using skinny wires or using crappy bulbs or not soldering connections and then complaining about bad HID. There are steps to take before you know exactly whats wrong with them.
whether you reverse the wires, whether you fix the ballast by relay to make sure the ballast work well when starting up.....
only my personal ideas....
Here's their address:
2570 corporate place E103
Monterey Park, CA
phone: 213-908-1217
So now, no worries about shipping if they are in the neck of your woods.
Also, I had a problem with my set as you can see where I had documented here on this forum.
Well, I got my new set and gave up fighting as it looks pretty much the same as the first one (USED).
It works, so I guess I give up complaining for a new set.
#110
MBWorld Fanatic!
it is not a smart way to ship back the defective one and ask them for a replacement cos you need to afford the shipping ( it is not cheap for the shipping from china , man)
dude, i suggest you switch the bulbs to check whether it is the problems of ballast or the bulbs....
Check your wiring first before cursing seller. Have to triple check, because i see so so many people just going with a stock wiring harness or using skinny wires or using crappy bulbs or not soldering connections and then complaining about bad HID. There are steps to take before you know exactly whats wrong with them.
whether you reverse the wires, whether you fix the ballast by relay to make sure the ballast work well when starting up.....
only my personal ideas....
dude, i suggest you switch the bulbs to check whether it is the problems of ballast or the bulbs....
Check your wiring first before cursing seller. Have to triple check, because i see so so many people just going with a stock wiring harness or using skinny wires or using crappy bulbs or not soldering connections and then complaining about bad HID. There are steps to take before you know exactly whats wrong with them.
whether you reverse the wires, whether you fix the ballast by relay to make sure the ballast work well when starting up.....
only my personal ideas....
also they dont cont ficker but after about 3-5 min of being on they trigger a bulb out code and then they may turn off. Then they may turn right back on or i have to shut them off and back on real quick at which point they come right back on. Its both of them and never the at the same time or in the same order. Again they DO NOT FLICKER.
#111
Super Member
Join Date: Mar 2007
Location: centennial, CO
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
2003 c240
If they are both doing it, then its doubtful that it's the ballast and its definitely not the bulbs. If you want to be sure it's not the ballast, take it out and hardwire it to a car battery or a jumper box and leave it on and see what it does. If it works fine then its not the ballast.
#113
Junior Member
Join Date: Sep 2010
Location: US DE Lewes
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
e350 09
#114
MBWorld Fanatic!
lol they actually just got delivered and isntalled today...it seems to have worked too...took it for a test drive at least and they didnt go off...tomorrow night will be the for sure tell!
#115
MBWorld Fanatic!
anyone know how hot these ballasts run? i didnt realize how effing hot the get...im kinda worried about if i should wrap them in something...the one I have resting against the plastic wheel well on the driverside and I dont want it to melt etc.
#116
Junior Member
Join Date: Sep 2010
Location: US DE Lewes
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
e350 09
what if you hook up the ballast tightly ???? will the ballaste melt ????
#117
MBWorld Fanatic!
what do you mean hook it up tightly? and im not worried about the ballasts melting but it melting whats around it...
#118
Junior Member
Join Date: Sep 2010
Location: US DE Lewes
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
e350 09
that is exactly what i mean ????? how about your test drive result ?????? does your ballasts melt something around it ?????? i guss not....
Last edited by crazyfunny; 10-20-2010 at 09:34 PM.
#119
Newbie
Actually, VVME is own by VISIONARI LLC and they are located in Monterey Park CA. So, if you are in southern california, why not just drop it off and get an exchange at their door.
Here's their address:
2570 corporate place E103
Monterey Park, CA
phone: 213-908-1217
So now, no worries about shipping if they are in the neck of your woods.
Also, I had a problem with my set as you can see where I had documented here on this forum.
Well, I got my new set and gave up fighting as it looks pretty much the same as the first one (USED).
It works, so I guess I give up complaining for a new set.
Here's their address:
2570 corporate place E103
Monterey Park, CA
phone: 213-908-1217
So now, no worries about shipping if they are in the neck of your woods.
Also, I had a problem with my set as you can see where I had documented here on this forum.
Well, I got my new set and gave up fighting as it looks pretty much the same as the first one (USED).
It works, so I guess I give up complaining for a new set.
i am planning to order a set of H7 HID kit 6K for my CLK 09 from vvme.com...
#123
Member
Join Date: Jan 2011
Location: Bartlett TN
Posts: 103
Likes: 0
Received 7 Likes
on
6 Posts
2005 SL500
I STAND CORRECTED!!!! Just finished installing the HID's and man, are they bright!!!! I purchased the 8000k headlights since I have led parking lights that matches them. Easy installation, plug and play, and I am totally satisfied with VVME!!! Will post pics soon!!!
#124
Super Member
Thread Starter
Join Date: Jul 2010
Location: Cali
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
2006 C230 Sedan
Do you have a non bi-xenon headlight? This is for a non bi-xenon, if you had bi-xenon, then you need something else.
It should fit.