complete c32 conversion on c230 coupe
#26
Super Member
Join Date: Feb 2011
Location: San Mateo, Ca
Posts: 502
Likes: 0
Received 1 Like
on
1 Post
C230 Coupe Silver
Hey Todd, heard you were looking for spacers. Idk if you want to go my route, but I'm about to get the stud conversion
http://www.azevedomotorsports.com/ar...tuds-p-69.html
And just get the spacers without bolts off eBay.
#27
Out Of Control!!
Since his last activity here was October 26th, either it wasn't done, or it was, was a complete disaster, and he now hates all of you ***** for recommending he go through with such a bad idea.
EDIT: the MB girly manny couldn't handle the torque. It would be fun to hear the first and only spinout though.
EDIT: the MB girly manny couldn't handle the torque. It would be fun to hear the first and only spinout though.
Last edited by tommy; 12-22-2011 at 02:23 PM. Reason: to demonstrate common sense
#29
MBWorld Fanatic!
I've seen it in person, running.
The only thing was that he couldn't get the ESP to work.
What a disappointment. LOL
The only thing was that he couldn't get the ESP to work.
What a disappointment. LOL
Since his last activity here was October 26th, either it wasn't done, or it was, was a complete disaster, and he now hates all of you ***** for recommending he go through with such a bad idea.
EDIT: the MB girly manny couldn't handle the torque. It would be fun to hear the first and only spinout though.
EDIT: the MB girly manny couldn't handle the torque. It would be fun to hear the first and only spinout though.
#30
Junior Member
Join Date: Mar 2009
Location: Miami
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2006 c-230
c32 conversion actually c35... lol!
I tried c32 mod with all added your ecu has to be vinned at dealer and they wont do it A__holes soooo I got my hands on a c350 engine and installed a supercharger after market and Im using the c230 ECU it runs it fine! 386hp 12.3 quartermile at 113mph WITH a C230 7speed tranny its geard for lower hp engine and 2-3-4 gear rips your head off!!!!! FanFu__entastic... half the price more hp.
#31
Super Member
Join Date: Feb 2011
Location: San Mateo, Ca
Posts: 502
Likes: 0
Received 1 Like
on
1 Post
C230 Coupe Silver
I tried c32 mod with all added your ecu has to be vinned at dealer and they wont do it A__holes soooo I got my hands on a c350 engine and installed a supercharger after market and Im using the c230 ECU it runs it fine! 386hp 12.3 quartermile at 113mph WITH a C230 7speed tranny its geard for lower hp engine and 2-3-4 gear rips your head off!!!!! FanFu__entastic... half the price more hp.
#33
MBworld Guru
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 22,007
Likes: 0
Received 6 Likes
on
6 Posts
white and whiter
I tried c32 mod with all added your ecu has to be vinned at dealer and they wont do it A__holes soooo I got my hands on a c350 engine and installed a supercharger after market and Im using the c230 ECU it runs it fine! 386hp 12.3 quartermile at 113mph WITH a C230 7speed tranny its geard for lower hp engine and 2-3-4 gear rips your head off!!!!! FanFu__entastic... half the price more hp.
#34
Junior Member
Join Date: Mar 2009
Location: Miami
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2006 c-230
c230 conversion
The W203 chasis is the same chasis for the c32 and the c230 -240-280-320-350... the tranny fits right on and ecu drives any of them except the c32 tranny or ECU wont work the only w203 chasis thats different is C55 cause they needed more room for the V8 so I think the front cap is from a CLK??? not sure but its about 8 inches longer. but just swapping the engine from a c350 is automatically a tremendous boost from 201hp to 278 and a ton of torque even without supercharging it.
#39
Junior Member
Join Date: Mar 2009
Location: Miami
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
2006 c-230
supercharger is Kleeman... sorry my camaro is Weiand.. paddle shifter mod is actually pretty neat would you like for me to post a youtube video of it? I dont know how to post pictures here ... I can give you the instructons how to do the paddle shift which no one has been able to do. without the guys from the UK programing their stuff.
#41
Super Member
Join Date: Feb 2011
Location: San Mateo, Ca
Posts: 502
Likes: 0
Received 1 Like
on
1 Post
C230 Coupe Silver
supercharger is Kleeman... sorry my camaro is Weiand.. paddle shifter mod is actually pretty neat would you like for me to post a youtube video of it? I dont know how to post pictures here ... I can give you the instructons how to do the paddle shift which no one has been able to do. without the guys from the UK programing their stuff.
#43
MBWorld Fanatic!
Didn't have to change computers, and it works?
No TCU change? Lets see a video of that 1/4 mile.
Oh....you couldn't figure out how to work the camera, or was uploading the issue...
I smell troll!
You have the technical expertise to make an engine that
was never in use at the time your car was mfg. communicate
with the existing electronic systems, but you can't figure out how to upload a picture?
Last edited by C230 Sport Coup; 03-15-2012 at 08:14 PM.
#46
let's start with pictures or a video of the 3.5L m272 w/ Kleemann supercharger mounted, then we can go from there. Dont worry about explanations or anything of the such. Just a few pictures will do for now.
A video uploaded to youtube is good too, just pop that hood for us and give us a good look around.
There is a button to upload attachments (pictures) at the top of the dialogue box when you go to reply.
If you can figure out youtube, you can figure that out.
If you can't, feel free to email them to anyone that does know how to upload them for the rest of us to see.
Surely of such a one-off, custom creation you already have tons of pictures on your camera if not already on your computer?
If you happen to have no documented evidence of such a feat anywhere, it shouldnt take but about 20 minutes to snap a couple pictures, upload to your computer, and attach them to a reply on here or in email.
if you need an email address b/c you cannot figure out attachments or youtube, then:
m272.96x@gmail.com
after you get us the pictures, you can explain how you managed to fit a Kleemann supercharger on your car considering they dont produce one for the m272 retail.
thanks.
#47
Super Member
Join Date: Feb 2011
Location: San Mateo, Ca
Posts: 502
Likes: 0
Received 1 Like
on
1 Post
C230 Coupe Silver
No,
let's start with pictures or a video of the 3.5L m272 w/ Kleemann supercharger mounted, then we can go from there. Dont worry about explanations or anything of the such. Just a few pictures will do for now.
A video uploaded to youtube is good too, just pop that hood for us and give us a good look around.
There is a button to upload attachments (pictures) at the top of the dialogue box when you go to reply.
If you can figure out youtube, you can figure that out.
If you can't, feel free to email them to anyone that does know how to upload them for the rest of us to see.
Surely of such a one-off, custom creation you already have tons of pictures on your camera if not already on your computer?
If you happen to have no documented evidence of such a feat anywhere, it shouldnt take but about 20 minutes to snap a couple pictures, upload to your computer, and attach them to a reply on here or in email.
if you need an email address b/c you cannot figure out attachments or youtube, then:
m272.96x@gmail.com
after you get us the pictures, you can explain how you managed to fit a Kleemann supercharger on your car considering they dont produce one for the m272 retail.
thanks.
let's start with pictures or a video of the 3.5L m272 w/ Kleemann supercharger mounted, then we can go from there. Dont worry about explanations or anything of the such. Just a few pictures will do for now.
A video uploaded to youtube is good too, just pop that hood for us and give us a good look around.
There is a button to upload attachments (pictures) at the top of the dialogue box when you go to reply.
If you can figure out youtube, you can figure that out.
If you can't, feel free to email them to anyone that does know how to upload them for the rest of us to see.
Surely of such a one-off, custom creation you already have tons of pictures on your camera if not already on your computer?
If you happen to have no documented evidence of such a feat anywhere, it shouldnt take but about 20 minutes to snap a couple pictures, upload to your computer, and attach them to a reply on here or in email.
if you need an email address b/c you cannot figure out attachments or youtube, then:
m272.96x@gmail.com
after you get us the pictures, you can explain how you managed to fit a Kleemann supercharger on your car considering they dont produce one for the m272 retail.
thanks.
#49
Junior Member
I want to do a c230 coupe to c32 conversion... but my family has use for the car so in the moment i'm just saving up the fund...
Yes, I understand this is very impractical so this is for mere personal reasons.
My future plan is to swap everything from a donor car, however I have a few concerns
1) since the c32 has a longer wheel base by 178mm (wiki) does this means that the drive shaft will have to be custom made or it will directly bolt on along with the diff?
2) Is there a CA smog/registration problem that prevents such engine swap? As of right now I understand it has to be newer engine from the same manufacturer and pass an inspector's inspection?
3) What has to be done if I want to have a manual transmission? (current coupe is automatic)
my end goal is to have a fun track car and, if possible, match my dad's panamera turbo
(current coupe handles 2:16@Chuckwalla and 2:46@Big Willow
DRIVES WELL!!!! VERY FUN!!!)
Yes, I understand this is very impractical so this is for mere personal reasons.
My future plan is to swap everything from a donor car, however I have a few concerns
1) since the c32 has a longer wheel base by 178mm (wiki) does this means that the drive shaft will have to be custom made or it will directly bolt on along with the diff?
2) Is there a CA smog/registration problem that prevents such engine swap? As of right now I understand it has to be newer engine from the same manufacturer and pass an inspector's inspection?
3) What has to be done if I want to have a manual transmission? (current coupe is automatic)
my end goal is to have a fun track car and, if possible, match my dad's panamera turbo
(current coupe handles 2:16@Chuckwalla and 2:46@Big Willow
DRIVES WELL!!!! VERY FUN!!!)
#50
MBWorld Fanatic!
Join Date: Dec 2009
Location: VA
Posts: 2,391
Likes: 0
Received 2 Likes
on
2 Posts
e36 318i, 2004 sti
1. Custom driveshaft is needed.
2. No smog that I know if. They dont have it here but dont they just test the tailpipe? A c32 is just another piece of metal with that motor.
3. You can use a manual to support the power of the C32.. A C240 6MT has been able to hold a modified CLK500. If you can get a 320 6spd would be your best bet. It will bolt up to the C32 block. You will need to call Renntech to have them re flash your ecu (I have been told it is $800) to able to run a manual. Btw I have never heard of the manual not supporting any power. They sell clutch kits that you will most likely need for 350hp..
2. No smog that I know if. They dont have it here but dont they just test the tailpipe? A c32 is just another piece of metal with that motor.
3. You can use a manual to support the power of the C32.. A C240 6MT has been able to hold a modified CLK500. If you can get a 320 6spd would be your best bet. It will bolt up to the C32 block. You will need to call Renntech to have them re flash your ecu (I have been told it is $800) to able to run a manual. Btw I have never heard of the manual not supporting any power. They sell clutch kits that you will most likely need for 350hp..
Last edited by MBfinatic; 12-10-2012 at 11:18 PM.