1st Step of M271 Pulley Kit development Complete!
#177
MBWorld Fanatic!
Youndoc, I understand your frustration but let me explain why as I have, more than anyone else on the forum gone through the various scenarios and designed a pulley kit for the M111 motors in the past. Take ASP for example, they make pulley kits for Ford (lightning/mustang) and GM (pontiac/buick) superchargers and other companies that make pulley kits for the BMW Mini. These are similar Eaton units with pressed on s/c pulleys and they also sell/rent pulley extractors to get the pressed on pulleys off. Unfortunately, on the MB's the S/C is in a location that precludes you from getting a pulley extractor in there to do the job. Can it be done, sure, but removing the s/c to remove the pulley is beyond most DIY mechanics, but removing a single bolt to remove the crank pulley is not. Ideally, a kit similar to one the Mini pulley kits would be ideal where they put on a collar on the shaft that allows for the quick changeover of different pulleys (maybe one for racing fuel that's more aggressive, one for economy for long trips, one for everyday driving). Also the collar allows for self centering of the pulley, a problem when you are dealing with pressed on pulleys that maybe installed wrong by 1/8" and cause problems with the belt alignment.
#178
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
very interesting thread. i didn't have time to read all 18 pages but can someone tell me if there is an evosport pulley kit for w230 c230 yet? it's not on their website? and that group buy, is it still going on?
#179
Out Of Control!!
Originally Posted by ctC230K
very interesting thread. i didn't have time to read all 18 pages but can someone tell me if there is an evosport pulley kit for w230 c230 yet? it's not on their website? and that group buy, is it still going on?
#180
Originally Posted by Buellwinkle
Youndoc, I understand your frustration but let me explain why as I have, more than anyone else on the forum gone through the various scenarios and designed a pulley kit for the M111 motors in the past. Take ASP for example, they make pulley kits for Ford (lightning/mustang) and GM (pontiac/buick) superchargers and other companies that make pulley kits for the BMW Mini. These are similar Eaton units with pressed on s/c pulleys and they also sell/rent pulley extractors to get the pressed on pulleys off. Unfortunately, on the MB's the S/C is in a location that precludes you from getting a pulley extractor in there to do the job. Can it be done, sure, but removing the s/c to remove the pulley is beyond most DIY mechanics, but removing a single bolt to remove the crank pulley is not. Ideally, a kit similar to one the Mini pulley kits would be ideal where they put on a collar on the shaft that allows for the quick changeover of different pulleys (maybe one for racing fuel that's more aggressive, one for economy for long trips, one for everyday driving). Also the collar allows for self centering of the pulley, a problem when you are dealing with pressed on pulleys that maybe installed wrong by 1/8" and cause problems with the belt alignment.
#181
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
Originally Posted by ctC230K
i didn't have time to read all 18 pages but can someone tell me if there is an evosport pulley kit for w230 c230 yet?
The kit is in development and according to Brad Otoupalik's (Evosport) post (a few posts before you), they are slightly delayed.
His user name is Otoupalik if you want to check out his posts.
#182
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
Originally Posted by tommy
No, no, and not yet. I wouldn't hold my breath.
#183
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
Originally Posted by drexappeal
Lazy A$$...LOL...So you can take all those pics, but not look through the entire 10 million page thread for info?...HAHAHA...Just playin'.
The kit is in development and according to Brad Otoupalik's (Evosport) post (a few posts before you), they are slightly delayed.
His user name is Otoupalik if you want to check out his posts.
The kit is in development and according to Brad Otoupalik's (Evosport) post (a few posts before you), they are slightly delayed.
His user name is Otoupalik if you want to check out his posts.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#184
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
Originally Posted by Young Doc
This is very interesting. So it IS possible to do just the SC pulley from what I gather. Lets say that we have to pull the radiator and some stuff out to get this thing installed - thats still worth it if we can use a $60-$100 pulley to get about 20HP. I bet if somebody does a great write up we could remove the SC or some engine bay components to get the room to remove the pulley. Another option is to see if someone could design a pulley puller to use in such a tight spot. The reason I am really pulling for the SC pulley is that it is safer, cheaper and proven - I think that we are creative enough to come up with a viable installation procedure. An aggressive SC pulley and header should run about $1000 or less - putting us at about 250HP and 300+TQ. From my experience if our exhaust (particularly header) flows well it can handle the more aggressive pulley with few problems. If we get this done we would have a legitimate performance car on our hands.
#185
Out Of Control!!
Renntech has one, from their website - www.renntechmercedes.com
I just got a Renntech installed on my 2002 - got it new off ebay for $720, which was the deal of the century.
Other than that one, maybe ASP has one - not sure about that. But that's it for you guys - you're pretty much screwed, unless Evosport's pulley comes into fruition. I'm not saying it won't, but the target market is very small, especially considering the '06es, of course.
I just got a Renntech installed on my 2002 - got it new off ebay for $720, which was the deal of the century.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Other than that one, maybe ASP has one - not sure about that. But that's it for you guys - you're pretty much screwed, unless Evosport's pulley comes into fruition. I'm not saying it won't, but the target market is very small, especially considering the '06es, of course.
#186
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Originally Posted by tommy
Renntech has one, from their website - www.renntechmercedes.com
I just got a Renntech installed on my 2002 - got it new off ebay for $720, which was the deal of the century.
Other than that one, maybe ASP has one - not sure about that. But that's it for you guys - you're pretty much screwed, unless Evosport's pulley comes into fruition. I'm not saying it won't, but the target market is very small, especially considering the '06es, of course.
I just got a Renntech installed on my 2002 - got it new off ebay for $720, which was the deal of the century.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Other than that one, maybe ASP has one - not sure about that. But that's it for you guys - you're pretty much screwed, unless Evosport's pulley comes into fruition. I'm not saying it won't, but the target market is very small, especially considering the '06es, of course.
#187
Super Moderator Alumni
Join Date: Mar 2004
Location: West Los Angeles
Posts: 7,684
Likes: 0
Received 10 Likes
on
5 Posts
Midnight Blue 2004.5 C230 Kompressor Sport Sedan. 2002 w210 E320, 2009 w211 E350 Sport
Originally Posted by ctC230K
lool i know, i will read them all eventually but i just want the answer and a cheap pulley i can buy right now. ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#188
Out Of Control!!
Originally Posted by nlpamg
yeah, but you have the M111 engine, we're waiting on the one for 2003 and up (M271).
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
Don't know of anyone who has it yet, though.
#190
MBWorld Founder
Join Date: Nov 2001
Location: SoCal
Posts: 2,593
Likes: 0
Received 0 Likes
on
0 Posts
ones too fast according to CHP!
Originally Posted by ctC230K
very interesting thread. i didn't have time to read all 18 pages but can someone tell me if there is an evosport pulley kit for w230 c230 yet? it's not on their website? and that group buy, is it still going on?
Thanks,
Brad
#191
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Originally Posted by otoupalik
Not yet due to manufacturing issues. We will have a special on the first 10 units.
Thanks,
Brad
Thanks,
Brad
#192
I have recently got myself a Kleemann M271 Pulley Kit with the K-Box, I just can't wait to it fix into my vehicle. I am holding back as it keeps disturbing me whether I should exclude the installation of the K-BOX. I was informed that the K-Box works with the MB stock ECU, however, I had my ECU tuned by MKB of germany. The question is will my engine blow up if the K-Box works with the current MKB ECU with different parameters ?
Without the Kleemann K-BOX, having to install the pulley kit, will there be any noticeable difference ?
__________________
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
Without the Kleemann K-BOX, having to install the pulley kit, will there be any noticeable difference ?
![tard](https://mbworld.org/forums/images/smilies/tard.gif)
__________________
#193
Super Moderator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
Originally Posted by slkfans
I have recently got myself a Kleemann M271 Pulley Kit with the K-Box, I just can't wait to it fix into my vehicle. I am holding back as it keeps disturbing me whether I should exclude the installation of the K-BOX. I was informed that the K-Box works with the MB stock ECU, however, I had my ECU tuned by MKB of germany. The question is will my engine blow up if the K-Box works with the current MKB ECU with different parameters ?
Without the Kleemann K-BOX, having to install the pulley kit, will there be any noticeable difference ?
__________________
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
Without the Kleemann K-BOX, having to install the pulley kit, will there be any noticeable difference ?
![tard](https://mbworld.org/forums/images/smilies/tard.gif)
__________________
#196
Almost a Member!
Join Date: Jan 2003
Location: Scottsdale, Arizona
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
2002 996TT,2004 996 C2,2005 C230K
Originally Posted by otoupalik
Send me an email and I will get in on the list now.
Thanks,
Brad
Thanks,
Brad
Count me in,please...
sergconon@yahoo.com.
Regards,
Serg
#197
Ok guys, here is the update. My vehicle ECU has been fine-tuned by MKB of Germany and obviously the car is very much alive compared to the stock ECU. The throttle response does give it a punch.
I installed the Kleemann M271 pulley kit yesterday and I am not taking any chances to have the Kleemann K-Box fiited in as I am afraid it may not work with the current MKB ECU paramenters installed in my vehicle. However, the Kleemann M271 pulley kit does change the entire car behaviour. The throttle, acceleration is amazing. Now the pulley kit really make a hell lot of difference. I compared the weight of the stock pulley against the Kleemann, the Kleemann is so much lighter.
I will be enjoying the ride this week with the Kleemann pulley kit.
I installed the Kleemann M271 pulley kit yesterday and I am not taking any chances to have the Kleemann K-Box fiited in as I am afraid it may not work with the current MKB ECU paramenters installed in my vehicle. However, the Kleemann M271 pulley kit does change the entire car behaviour. The throttle, acceleration is amazing. Now the pulley kit really make a hell lot of difference. I compared the weight of the stock pulley against the Kleemann, the Kleemann is so much lighter.
I will be enjoying the ride this week with the Kleemann pulley kit.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
#198
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
Originally Posted by slkfans
Ok guys, here is the update. My vehicle ECU has been fine-tuned by MKB of Germany and obviously the car is very much alive compared to the stock ECU. The throttle response does give it a punch.
I installed the Kleemann M271 pulley kit yesterday and I am not taking any chances to have the Kleemann K-Box fiited in as I am afraid it may not work with the current MKB ECU paramenters installed in my vehicle. However, the Kleemann M271 pulley kit does change the entire car behaviour. The throttle, acceleration is amazing. Now the pulley kit really make a hell lot of difference. I compared the weight of the stock pulley against the Kleemann, the Kleemann is so much lighter.
I will be enjoying the ride this week with the Kleemann pulley kit.![drive](https://mbworld.org/forums/images/smilies/driving.gif)
I installed the Kleemann M271 pulley kit yesterday and I am not taking any chances to have the Kleemann K-Box fiited in as I am afraid it may not work with the current MKB ECU paramenters installed in my vehicle. However, the Kleemann M271 pulley kit does change the entire car behaviour. The throttle, acceleration is amazing. Now the pulley kit really make a hell lot of difference. I compared the weight of the stock pulley against the Kleemann, the Kleemann is so much lighter.
I will be enjoying the ride this week with the Kleemann pulley kit.
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
thanks man!