One-touch windows quit working...help please
11-15-2004, 02:37 PM
#1
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: Florida
Posts: 13,969
Likes: 0
Received 0 Likes
on
0 Posts
In the market
One-touch windows quit working...help please
I disconnected my battery over the weekend. When I reconnected it several hours later, everything seemed to return to is proper state with one exception. The windows will not roll up with "one-touch". They still roll down with "one-touch" as they should...just not up. Is there a setting somewhere, or am I just retarded and they have never rolled up with one-touch...or what?
Thanks in advance guys!
Thanks in advance guys!
11-15-2004, 02:45 PM
#2
Out Of Control!!
Before amdeutsch steps in with his usual, RTFM for how to re-synch the windows. That should clear it up; if not, I'm outta ideas.
11-15-2004, 02:52 PM
#3
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: Florida
Posts: 13,969
Likes: 0
Received 0 Likes
on
0 Posts
In the market
Originally Posted by tommy
Before amdeutsch steps in with his usual, RTFM for how to re-synch the windows. That should clear it up; if not, I'm outta ideas.
11-15-2004, 03:01 PM
#4
From the manual, try this...
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
11-15-2004, 04:42 PM
#5
MBWorld Fanatic!
Join Date: Jun 2003
Location: San Diego, CA & San Jose, Costa Rica & Stuttgart, Germany
Posts: 9,498
Likes: 0
Received 3 Likes
on
3 Posts
1959 220S / 1979 230 G / 2002 A210 AMG / 2003 C320 SC / 2004.5 C320 SS / 2005 ML350 SE / 2008 smart
Originally Posted by MB-BOB
From the manual, try this...
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
That method works exactly to the "T" ! I recently had to reprogram all of my windows & Pano-roof for the same reason. Followed instructions as stated above, and bingo... all done ! Easy fix !
Carlos
Saprissa@aol.com
11-15-2004, 07:16 PM
#7
Out Of Control!!
Thread Starter
Join Date: Jul 2003
Location: Florida
Posts: 13,969
Likes: 0
Received 0 Likes
on
0 Posts
In the market
Originally Posted by MB-BOB
From the manual, try this...
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
Close each window one at a time, and hold the switch beyond its auto-up detent position for 3-4 seconds after the window is closed, then release. This should reset the auto up function. This procedure can also be used to reset the auto down function... for windows, sunroofs, and power seats (if you got-em), because all these use the same memory module. If that doesn't work, you'll need to take a trip to the dealer for warranty repair. Let us know if this works.
Trending Topics
11-15-2004, 07:48 PM
#8
MBWorld Fanatic!
Originally Posted by Brunelleschi
I've done the searches on the forum with no luck. ...
