dacatz

thx for the link.....can't wait to install the camera asap....btw for u guys (near socal area) if u want to order the backup camera, u can order thru this place

http://www.sonicelectronix.com

from my understanding....u can go there and p/u your order and they have great service....(45mins away from LA)

Ron Jr

If you have installed an aftermarket stereo this should only take an hour. Very easy job the hardest part for me was getting the video lead from the trunk to the passenger compartment.

f8al

There's a step about splicing a wire to the reverse lights to give the camera power, that I'm a little weary about. There isn't much detail for what seems to be the most crucial part. I'm thinking it will make more sense when I'm actually doing the install.

Sully

f8al, that step isn't as difficult as it seems. The easiest way that I've found is to strip back some of the insulation on the wire that you're splicing so as to have the copper exposed, but not broken. Wrap the bare wire that you're splicing onto this exposed piece of copper and tape the whole thing up. I've done this numerous time when splicing to factory wires.

f8al

Thanks! I was picturing some wire nut splice configuration, but your suggestion makes a lot more sense.

Ron Jr

Just go to Radio Shack and pick up a pack of these.

http://www.radioshack.com/product/in...ductId=2104093

dacatz

just finish install the backup camera last week....all the instruction are
helpful...but i need to comment some more info because i have some area which i have trouble......Spec for my c63: APP (Canadian Version P30 w/lsd) Premium Package, Carbon Trim, Sat. radio, Keyless Go

1. My kenwood backup camera require Accessories wire (red) to hook up, and i spliced to a wire going to cig ligther fuse (Pink wire) (pics will provide later)

2. for the steering wheel control to activate the backup camera funtion for my Command system, it didn't work for me, therefore i access the engineering manual by pressing 1 , # and hang up key...then i goto menu 7.7.17 to turn the backup camera funtion on. But i don't know why there is 3 option to choose, so i try each one...none of them work,everytime when i put in reverse ,also even if i turn off the car and turn on right away, it still doesn't work. At last, I have figure it out!

To Turn on the backup camera function for the my kenwood camera, first go engineering menu 7.7.17 , then choose SRVC, next turn off the car, not sure if require to lock the door or not...but i locked the door....leave the car for 5 mins....then start the car, put in "R", the backup camera screen will be turn on.

dacatz

sorry, have to borrow the pics from the previous post!

I have spliced my acc wire from to this wire!

Note: spliced to red circle area!

white46

was that constant 12v? meaning goes on when the car is on and goes off with the car going off?

dacatz

not constant 12v....that is ignition on and u will get 12v in that wire...

rst63

It might just be stupid me but let me get this strait. We need a FRAKA to RCA because FRAKA is need to connect to the back of COMMAND, and RCA is to the back up cam?

Also for the FRAKA to RCA adaptor should the RCA be male or female?

I am Jeff

Female! :-P I hope this helps

rst63

Thanks alot! Also i noticed that for the camera, there is 3 connection or wires that should be connect. Ground, Power, and Reverse light. I understand where the ground should be connected but where do i connect the power and reverse? should both be connected to the reverse tail light?

I am Jeff

Some people run the ACC wire all the way to the front to the cigarette lighter, but I preferred to keep it clean, so i kept it back there. I forgot which one I put it to, but I'll let u know later when I re adjust my camera either today or tomorrow. The reverse should be connected to the reverse lamp.

kevinwithdabenz

This is a little off topic from the OP, but i noticed that there is a Blue port for AUX audio. is that what is used if someone wanted to install a system with bass? or is that for ipod integration?

thanks.

blue00r6

This fakra adapter.. can it be found at Radio shack? or... I just got my camera yesterday and want to do this tomorrow, not wait for an ebay cable!!

I am Jeff

The radio shacks around me do not sell FAKRA adapter. I just bought mine from mid city engineering.

blue00r6

Boo.. maybe i'll get lucky at a bigger electronics store...

blue00r6

waiiiiiiiit.... I just bout the CMOS-200 will this one work??? i see the guys using CCD-2000... .. does it matter?

I am Jeff

It doesn't matter. I tested both teh CMOS-200 and CCD-2000. Dont' ask why I bought two. lol :p

joshg1001

what is the difference between the two?

Nuru

My Firefox works fine, no issues.

I am Jeff

On paper, slightly better resolution and better viewing angle. But on the screen, basically same thing.

joshg1001

which one is the better one?

absolutleo

how are you all snaking the rca cable from rear to front? is taking the interior trim/carpeting apart required?