Hello I got a 2012 C Class 250 Sprt I'm going to run H&R Super sport lowering springs on some 19x8.5 & 19x9.5 ET 45,what size tires should I use to help prevent rolling fenders and rubbing with a full back seat... Thanks

 

235 35 19 and 265 30 19 will be mint.

 

Like what Mtl20v said... 235/35/19 Front and 265/30/19 Rear

You have a conservative offset so the chances of rubbing with Super Sports is low.

 

I for got I'm running et 40 & 45 is that ok

 

I'm new to this forum, and I am starting to become quite confused on this whole wheel thing. You guys seem to know more than the dealer I've been asking. I'm trying to find a nice set of rims for my dad. He's got a 2011 C300 4matic Sport. Can any of you tell me which (if any) of these rims will fit his car properly (no rubbing or sticking out or anything)?

Thanks!

http://www.ebay.com/itm/19-AMG-STYLE...ht_3648wt_1376

http://www.ebay.com/itm/18-AMG-Wheel...ht_5600wt_1142

http://www.ebay.com/itm/18-AMG-Wheel...ht_7296wt_1142

http://www.ebay.com/itm/19-AMG-Wheel...ht_6230wt_1142

http://www.ebay.com/itm/19-AMG-Wheel...ht_6064wt_1142

http://www.ebay.com/itm/19-Mercedes-...ht_4511wt_1376

http://www.ebay.com/itm/19-AMG-Wheel...ht_4412wt_1142

 

JB I don't see any problems with those wheels unless your planing to lower your vehicle

 

The title of this listing says it'll fit 2008-Present C300. But when I put in my cars info (2011 C300 4matic Sport), it says they're not compatible. Are you sure these wheels should work well?? I'm not going to lower the car at all.

 

The only thing I can think about is maybe hub adapters but more then likely you wouldn't need them,and as long as you don't have a big brake kit you will be fine,just email the seller

 

I ordered 19" amg reps....8.5 front and 9.5 rear....not sure the offsets but I'm sure someone has them on their car... the wheels I'm looking into are 245/35 and 265/30....will this work without rubbing....car is stock height won't be lowered...rwd

 

Rims Size: 18 X 8" front & 18 X 9" rear

Bolt Pattern: 5 X 112

Offset: 42 mm front & 45 mm rear

Hub Bore: 66.6

 

Wheel Width: 8.5" Front 9.5" Rear
Wheel Offset: ET 48 Front and ET 48 Rear
Wheel Hub Bore : 66.56

any help would be appreciated

 

I am a little confused and need some help.

I'm looking a a set of 18x8.5 wheels offsite is 43 and want to make sure they fit my 08 c300 4matic

 

Yes, they will fit fine. You may want to use some 10-15 Mm spacers to bring the rears out a bit otherwise your rears will sit into the wheel well a bit more

 

I'm looking at these wheels!

http://www.powerwheelspro.com/shop/p...roducts_id=419

My ride is 4matic want to keep it staggered as they are now. I'm looking to get 18s so I don't lose ride quality.

18x8.5 front 35 offset
18x9.5 rear 35 offset

Is this right? Offset??? Thanks in advance!

 

Hey i was looking at getting this setup;

Rim: 20 Inch Wheel Specials Giovanna Martuni Black 20 x 8.5 (35mm) 5x112

Tire: Toyo Tires Proxes ST II ( 265/50/20)

Just wondering if anyone thinks it will rub on a 09 c230? And i'm not planning on lowering.

 

I need help. I ordered a set of rim 8,5 x 18 ET45 and my tires size
Front 235/40R18
Rear 255/35R18
I worry about rubbing. Do I need any wheel spacer for front or rear? Thank for all advices

 

i also have a 4 matic

and looking for

19x8.5 Offset 45 In front
19x9.5 Offset 45 In rear

Tire Front : 235-35-19
Tire Rear : 255-30-19

You guys think i should be ok ?

 

Somehow i got stuck with 19 x 9.5 rears with a 35 offset, and with 265/30/19's they rub slightly. Would switching to 255/30's fix the issue? Or should the fenders be rolled?

 

dude i ran into the same problem...and in my case a little worse cuz i have 285-30-19 tires in back i read somewhere cant remember that they can shave the 10 to 20 mm to make the rim fit better

 

I dented my wheel the other day while driving over a pothole and i dont really have any knowledge about wheels but i want to get all 4 wheels replaced. All i know is my tire size, i was wondering if any of you guys can help me out with what type of wheels to look at.
i drive a 2011 c300 4matic sport with
225/45/17 (front) and 245/40/17(rear)
thank you

 

Found a set of AMG Black Edition Reps. at Aspec wheels on ebay.

19x8 35mm
19x9 35mm

I want to run 235-35-19F and 265-30-19R
2010 C300 4matic sport

 

You won't rub. That is what I have and my rims are ET44.

 

Hi guys,

Quick one. Bought Forgestar F14 for my 08 C300 sport and tried fitting on the wheels, and it was rubbing my strut. Any advise?

I am currently running 245/40/18 8.5 ET 44 on the front and 265/35/18 9.5 ET 50 on the rear.

Please let me know what I can do to solve this issue.

 

First off I would go with a 235/40R18 to bring the height down to where is should be. That should solve your problem. The 245/40R18 is too tall for the C Class.

 

Hey guys,
I picked up a set of HRE 19x8.5 front, 19x9.5 rear for my 2008 c350 4matic.
From my measurements the offset seems to be ET43 all around. Should these fit my car??
Tire sizes I'm thinking: 235/35R19 and 255/30R19


From what I am understanding from this thread they should fit, but when I mounted tires (just used an old set of 245/35R19 I had around for a test fit) and put them on the car they poke out what to me looks like ALOT. Looks like I will get a very small amount of rub on the inner wheel well up front and can't tell for sure but looks like I will rub in the back with passengers when I hit bumps.
Any suggestions for what I can do? Has anyone had the wheel hub face machined to increase the offset?
Any insight would be greatly appreciated. Take a look at the pictures and tell me what you think.