Rotora Big Brake Kit now available for W204 C300/C350
6 piston front
4 piston rear
with 14" Drilled/slotted OR Slotted 2pc disc rotors


Available in RED or METALLIC BLUE calipers
Kit comes with:
Stainless steel brake lines, brake pads and hardware
PM/EMAIL/CALL ME for Mbworld member pricing!
6 piston front
4 piston rear
with 14" Drilled/slotted OR Slotted 2pc disc rotors


Available in RED or METALLIC BLUE calipers
Kit comes with:
Stainless steel brake lines, brake pads and hardware
PM/EMAIL/CALL ME for Mbworld member pricing!

MBWorld Fanatic!
I wish we had a Homer Simpson drooling smiley. Hmmm BBK Droooool
Senior Member
Quote:
I hope it is much cheaper than Brembo. Brembo would cost $7000-$8000, right?Originally Posted by Ron Jr
I wish we had a Homer Simpson drooling smiley. Hmmm BBK Droooool
MBWorld Fanatic!
Rotara is cheaper...figure maybe by a third or quarter.
MBWorld Fanatic!
Can I get crossdrilled only rotors and silver calipers? I recall these being big with the Audi guys. It's good stuff.
Senior Member
Quote:
I think this might apply in this situation...Originally Posted by Ron Jr
I wish we had a Homer Simpson drooling smiley. Hmmm BBK Droooool

Member
Quote:
6 piston front
4 piston rear
with 14" Drilled/slotted OR Slotted 2pc disc rotors


Available in RED or METALLIC BLUE calipers
Kit comes with:
Stainless steel brake lines, brake pads and hardware
PM/EMAIL/CALL ME for Mbworld member pricing!
Originally Posted by VividRacing
Rotora Big Brake Kit now available for W204 C300/C3506 piston front
4 piston rear
with 14" Drilled/slotted OR Slotted 2pc disc rotors


Available in RED or METALLIC BLUE calipers
Kit comes with:
Stainless steel brake lines, brake pads and hardware
PM/EMAIL/CALL ME for Mbworld member pricing!
What pricing for this brake kit? i am interested
Quote:
PM me for your mbworld member pricingOriginally Posted by Andr3an
I hope it is much cheaper than Brembo. Brembo would cost $7000-$8000, right?
Quote:
Standard caliper color only comes in RED and METALLIC BLUEOriginally Posted by Derspeed
Can I get crossdrilled only rotors and silver calipers? I recall these being big with the Audi guys. It's good stuff.
Custom caliper color is additional $300 per caliper set so $600 total for front and rears. It might be cheaper if you have it powder coated to your local paint shop instead. Rotora is pretty big on bmw's too, a lot of my m3 customers have this kit
Here's a picture of Metallic Blue:

MB World Stories
The Best of Mercedes & AMG
ExploreMBWorld Fanatic!
Powdercoat...seriously? Not brake calipers. I'd just paint them myself with G2. That blue looks pretty good though. Thanks for the reply. BTW, will you post some actual c class parts instead of the generic picture?
MBWorld Fanatic!
Quote:




Surely you don't mean the rotors. Do you mean Rotora the brand or brake calipers in general?Originally Posted by Merc-IN-the-Dez
Rotors gotta be red, red, red, man!!!!



Super Member
Quote:
Whats wrong with powdercoating?Originally Posted by Derspeed
Powdercoat...seriously?
Senior Member
what are the chances these will fit an SRT6... aka old SLK32/C32 ???
MBWorld Fanatic!
Quote:
nothing. pricey, but worth it imo Originally Posted by alexlev
Whats wrong with powdercoating?

All Pm's replied!

Quote:
Powder coating it is def worth it compared with using a g2 paint Originally Posted by Azn_C300
nothing. pricey, but worth it imo
bump

MBWorld Fanatic!
Quote:
Originally Posted by alexlev
Whats wrong with powdercoating?
I have seen plenty of calipers with cracked powercoating. I am not sure why it happened. The calipers were all OE units though and not smooth like the Rotoras, Brembos or Wilwoods. That may have had something to do with it. The powdercoat didn't come off, it just looked like it had spider webs throughout. I have used G2 paint after completely disassembling calipers. The results were always inpressive.
Anyway, I like the Rotoras and I am not trying to take anything away from this thread. I wish there were more companies like Vivid making quality prodcuts for the W204.
Rotora also offers CHROME calipers for additional cost

Rotora BBK on Porsche 997


Rotora BBK on Porsche 997

Pm's replied
Quote:
Thanks! Originally Posted by rgrpc
Looks great!

All pm's replied
SPONSOR/MBworld Guru
should be around $5K, but I'd get OEM AMG BBK before I get Rotora. Better yet Brembo Monoblock, but you'd be paying an extra $2k.

