Auto window switch wont go up
#1
MBWorld Fanatic!
Thread Starter
Auto window switch wont go up
Today my drivers door window started acting up. the auto works fine when pressing down. When pressing up, after I let go of the button and the window will stop going on. As if something is holding down the glass. The sensor it's telling it to stop I guess. I hold it manually to the top and once it reaches the top it rolls back down about 1/4 inch. Anybody know what this could be?
#3
Super Member
Join Date: Mar 2012
Location: San Francisco
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
'08 Mercedes C300
You can try recalibrating it. I think its something like.. holding the window button for 10 seconds. Something like that.. don't quote me on that, but its worth a shot.
#5
Senior Member
Correct. If no one remembers exactly how to recalibrate it, check the onwer's manual. I remember it stating how to do this.
#6
MBWorld Fanatic!
Thread Starter
#7
Member
Same thing happened to my front passenger door (left side - I'm in the UK). I did the reset procedure three times and it fixed it.
Press the window switch (for the window concerned) to take the window down and hold it for 5 secs. Then take the window up again and hold it for 5 secs after it closes. Did this x3 and it all functions perfectly again.
Press the window switch (for the window concerned) to take the window down and hold it for 5 secs. Then take the window up again and hold it for 5 secs after it closes. Did this x3 and it all functions perfectly again.
Trending Topics
#8
MBWorld Fanatic!
Thread Starter
Same thing happened to my front passenger door (left side - I'm in the UK). I did the reset procedure three times and it fixed it.
Press the window switch (for the window concerned) to take the window down and hold it for 5 secs. Then take the window up again and hold it for 5 secs after it closes. Did this x3 and it all functions perfectly again.
Press the window switch (for the window concerned) to take the window down and hold it for 5 secs. Then take the window up again and hold it for 5 secs after it closes. Did this x3 and it all functions perfectly again.
#11
Senior Member
#12
MBWorld Fanatic!
Thread Starter
Owner's Manual: http://www.mbusa.com/mercedes/servic...owners_manuals
#13
Senior Member