I think i found my next mod!
#51
Try turning on your parking lights. I believe the 2009 has the same switch as the 2008. I know I can turn mine counter clockwise from the off position into two different positions past that; one for right fog, one for left fog. It's there as a parking light for Euro countries. Doing this should activate your right fog.
#52
Junior Member
here are some quick pictures after install.
The taillights are BRIGHT!! But they are Loud as well! Can't really notice the sound only after the engine started. On the side note, I found my taillight connector on my passenger side is melted during the install so i had to connect the brown wire on the side. ( seems like many other are just talking about this issue on another thread!!!!!!!
)
![](https://mbworld.org/forums/attachments/c-class-w204/244744d1349339809-i-think-i-found-my-next-mod-1.jpg)
![](https://mbworld.org/forums/attachments/c-class-w204/244745d1349339809-i-think-i-found-my-next-mod-2.jpeg)
The taillights are BRIGHT!! But they are Loud as well! Can't really notice the sound only after the engine started. On the side note, I found my taillight connector on my passenger side is melted during the install so i had to connect the brown wire on the side. ( seems like many other are just talking about this issue on another thread!!!!!!!
![wwf](https://mbworld.org/forums/images/smilies/chairshot.gif)
![](https://mbworld.org/forums/attachments/c-class-w204/244744d1349339809-i-think-i-found-my-next-mod-1.jpg)
![](https://mbworld.org/forums/attachments/c-class-w204/244745d1349339809-i-think-i-found-my-next-mod-2.jpeg)
![](https://mbworld.org/forums/attachments/c-class-w204/244746d1349339809-i-think-i-found-my-next-mod-3.jpeg)
#55
Junior Member
Join Date: Oct 2012
Location: Chicago
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
2010 Arctic White C300 4matic Sport
Thanks for sharing the pictures ggms16 and gary_youngster, the tail lights look awesome!
How visible are the brake lights and turn signals in direct sunlight? Are they comparable to OEM? I've seen aftermarket LED tail lights on other cars that have pretty poor brake light and turn signal output.
How visible are the brake lights and turn signals in direct sunlight? Are they comparable to OEM? I've seen aftermarket LED tail lights on other cars that have pretty poor brake light and turn signal output.
#56
Junior Member
Thanks for sharing the pictures ggms16 and gary_youngster, the tail lights look awesome!
How visible are the brake lights and turn signals in direct sunlight? Are they comparable to OEM? I've seen aftermarket LED tail lights on other cars that have pretty poor brake light and turn signal output.
How visible are the brake lights and turn signals in direct sunlight? Are they comparable to OEM? I've seen aftermarket LED tail lights on other cars that have pretty poor brake light and turn signal output.
One thing i wanna bring up is that my driver side brake light is turned on along with the led strip bar( but its very dim and you can't tell unless u get so close. ggms16 do you have that problem? ( i think you can kinda see that from my pic above... just on the driver side )
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
Last edited by gary_youngster; 10-05-2012 at 03:30 AM.
#59
i bought one from k2motor on ebay. just tested the lights in two different cars. left and right signals do not work as well as error code on dash board.
is it just me? anyone else with same problem?
is it just me? anyone else with same problem?
#60
MBWorld Fanatic!
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
Yea, the melting connectors have me worried also now specially since I'm running Raybrig super superwhite bulbs for my parking and brake lights. I'll have to check them when I get home this weekend.
As for the new tails, I'll keep watch for now to see if any problems develop and/or how long they last.
As for the new tails, I'll keep watch for now to see if any problems develop and/or how long they last.
#61
Senior Member
Join Date: Apr 2010
Location: Orlando FL
Posts: 410
Likes: 0
Received 2 Likes
on
2 Posts
2009 C300 4Matic Sport
Thanks! yup... this is the regular one!
Thx! They are bright even in direct sunlight. I say its as bright as oem.
One thing i wanna bring up is that my driver side brake light is turned on along with the led strip bar( but its very dim and you can't tell unless u get so close. ggms16 do you have that problem? ( i think you can kinda see that from my pic above... just on the driver side )![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
Thx! They are bright even in direct sunlight. I say its as bright as oem.
One thing i wanna bring up is that my driver side brake light is turned on along with the led strip bar( but its very dim and you can't tell unless u get so close. ggms16 do you have that problem? ( i think you can kinda see that from my pic above... just on the driver side )
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
I'm sorry for the late delay. Too busy lately..
I don't have that issue, both looks exactly the same and they are really bright. Make sure you connected the cables tight, if you can sort it out, I would contact the seller. Sorry about that man.
#63
Super Member
Join Date: Jun 2006
Posts: 556
Likes: 0
Received 4 Likes
on
4 Posts
2011 C300 4matic, 2015 Porsche Macan S, 2006 R500 (sold)
http://www.ebay.com/usr/dotcomracing
#66
i can't wait to see your results. Also, just to help you, you don't need to remove the OEM tail light, just unplug the OEM plug, put the led tail light in the trunk and plug it into led tail lights in order to test them before perfact installation because 1 out 4 bolts are hidden. its not that hard to find but also not that easy to find so.....
#67
See this for my DIY on these exact tail lights.
https://mbworld.org/forums/c-class-w...ml#post5388081
https://mbworld.org/forums/c-class-w...ml#post5388081
#69
See this for my DIY on these exact tail lights.
https://mbworld.org/forums/c-class-w...ml#post5388081
https://mbworld.org/forums/c-class-w...ml#post5388081
thank you for your diy post.
did you cut the white cable tie that holding all the wire together? i don't think that should be matter but that's only thing i did other than plug and unplug connectors
#70
I did cut the cable tie on one side to relieve a tight wire. However, I velcro wrapped it again after mounting the "ballast" and relieving the wire.
#71
Do you think cutting white cable tie could be the reason why my turn signals are not working? I really want to get this lights working. They are so hot!!!! please help me if you could!!!
#72
Super Member
Thread Starter
Sorry for the huge pics, i'm technologically impaired right now. Quick recap - no errors, no issues, they work perfect .. look great. everyone is right so far, the pictures dont do them justice. they look really amazing. Only downside so far is the noise. its audible from outside the car with the trunk closed if you're in a silent setting (in the garage at night). definitely not a big issue though w/the car running or from a couple feet away
https://i.imgur.com/IjQnC.jpg/
https://i.imgur.com/2GxON.jpg
https://i.imgur.com/IjQnC.jpg/
https://i.imgur.com/2GxON.jpg
#73
Sorry for the huge pics, i'm technologically impaired right now. Quick recap - no errors, no issues, they work perfect .. look great. everyone is right so far, the pictures dont do them justice. they look really amazing. Only downside so far is the noise. its audible from outside the car with the trunk closed if you're in a silent setting (in the garage at night). definitely not a big issue though w/the car running or from a couple feet away
https://i.imgur.com/IjQnC.jpg/
https://i.imgur.com/2GxON.jpg
https://i.imgur.com/IjQnC.jpg/
https://i.imgur.com/2GxON.jpg
Thank you for your info!!! can you please show me how the wires are connected? did I do something wrong? or did i unluckly got default item?
#74
Junior Member
Join Date: Oct 2011
Location: Sydney
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
'07 C320 CDI
![Thumbs up](https://mbworld.org/forums/images/icons/icon14.gif)
What a great find. Thanks to the original poster for sharing. These are the best looking ebay tail lights by far!
They replicate the facelift OEM perfectly without the headache of re-programming.... Love it!
Hope they come back into stock again soon.
They replicate the facelift OEM perfectly without the headache of re-programming.... Love it!
Hope they come back into stock again soon.
#75
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)