Question about mercedes factory 9 channel burmester amplifier
#51
Anyone who can help with Audison Forza software
Guys,
I am following somewhat in the footsteps of several guys before me.
I have the Forza 8.9 and I am trying to set it up. I do not need to bridge the front subs as Mike 5215 because I have plenty of power to send to the front woofers so that should give me 2 extra channels to use the rear speakers. However, the software does not allow me to set it up this way. Any help would be appreciated. So, this is the setup I would like to do:
full disclosure (NAV TV Zen-M) - (Forza 8.9) - (Memphis Mono)
channel 1 - front left tweeter and midrange
channel 2 - front right tweeter and midrange
channel 3 - front left woofer
channel 4 - front right woofer
channel 5 - rear left surround (tweeter and midrange)
channel 6 - rear right surround (tweeter and midrange)
channel 7 - rear left deck midrange
channel 8 - rear right deck midrange
channel 9 - sub
2018 C43 AMG Cabriolet with Burmester
I am following somewhat in the footsteps of several guys before me.
I have the Forza 8.9 and I am trying to set it up. I do not need to bridge the front subs as Mike 5215 because I have plenty of power to send to the front woofers so that should give me 2 extra channels to use the rear speakers. However, the software does not allow me to set it up this way. Any help would be appreciated. So, this is the setup I would like to do:
full disclosure (NAV TV Zen-M) - (Forza 8.9) - (Memphis Mono)
channel 1 - front left tweeter and midrange
channel 2 - front right tweeter and midrange
channel 3 - front left woofer
channel 4 - front right woofer
channel 5 - rear left surround (tweeter and midrange)
channel 6 - rear right surround (tweeter and midrange)
channel 7 - rear left deck midrange
channel 8 - rear right deck midrange
channel 9 - sub
2018 C43 AMG Cabriolet with Burmester