My W205 C300 Base Body Styling Conversion Project
#101
MBWorld Fanatic!
Thread Starter
BTW, you probably know this, but you will have to take them back out. At least IMO.
The bumper cover only has "shipping/manufacturing" primer that should be sanded down. It's not the kind of primer you want to paint directly over or leave as-is.
The bumper cover only has "shipping/manufacturing" primer that should be sanded down. It's not the kind of primer you want to paint directly over or leave as-is.
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
#107
Collision Prevention Assist Front Radar Issues
Quick question: did you face any issues with your BAS system light malfunctioning after the body conversion?
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
#108
Quick question: did you face any issues with your BAS system light malfunctioning after the body conversion?
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
#109
MBWorld Fanatic!
Thread Starter
Quick question: did you face any issues with your BAS system light malfunctioning after the body conversion?
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
Sorry you're having issues. I'm really curious what they did because the radar sensor mount is part of the reinforcements for the left and right of the bumper. If they had to build a "custom mount", that leads me to believe they left out the bumper reinforcement. If so, they screwed it up IMO.
Unless your new bumper was not just the bumper cover, buy also had the C43 reinforcements? But even then, I would be fairly certain the C43 utilizes the same radar sensor and would have a place for it in the C43 reinforcement.
The part I'm talking about is pictured below (and shows how I had to cutoff the lower ear to fit the new bumper) and you can see the radar sensor is contained in the bumper reinforcement.
![](https://cimg7.ibsrv.net/gimg/www.mbworld.org-vbulletin/580x326/c63_front_bumper_12_83cd3ccde8687dd74c465c2ff8f3b6b6042eed40_e87a51695a3861311e511bbbb1e4f85286fd4dd5.jpg)
Taken from this post:
https://mbworld.org/forums/c-class-w...ml#post8554598
I hope they didn't just leave out the reinforcement, as otherwise that part of the bumper cover will be like a wet noodle.
For the sensor issue, sorry I'm not sure why you're having that issue unless it's possibly not mounted properly?
The following 2 users liked this post by Keith66:
benzw205 (06-01-2023),
Kush Desai (04-21-2023)
The following 2 users liked this post by sidsidhu:
benzw205 (06-01-2023),
Kush Desai (04-25-2023)
#111
Member
Quick question: did you face any issues with your BAS system light malfunctioning after the body conversion?
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
For context, I converted my 2016 Base C300 (same body as yours) into a 2020 facelift AMG C43 with an aftermarket bumper kit. Due to the different bumper styles, the autobody shop could not properly mount the ‘Collision Prevention Assist’ module (rectangular unit that typically sits behind the bumper), and they had to build a custom mount to place it in the same location it was in previously. My BAS light will randomly go off while driving now, and I haven’t been able to find a solution despite having numerous re-visits to the shop. Wondering if you have any advice, or how you mounted your sensor on your C63 kit.
my car only has the parking sensors and everything just popped in to the aftermarket bumper in stockish locations.
maybe it needs to be calibrated like when you replace the windshield, the sensors on windscreen have to be reset
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
The following users liked this post:
benzw205 (06-01-2023)
#115
Member
yeah first thing I noticed too, think they have made some changes to bumper too.. I didn't have to swap any reinforcement stuff over from stock bumper or cut anything but the intercooler parts have no room on passenger side due to the tubing that lives there, driver side lots of space, horns could be easily relocated.
#116
MBWorld Fanatic!
Thread Starter
yeah first thing I noticed too, think they have made some changes to bumper too.. I didn't have to swap any reinforcement stuff over from stock bumper or cut anything but the intercooler parts have no room on passenger side due to the tubing that lives there, driver side lots of space, horns could be easily relocated.
The following users liked this post:
benzw205 (06-01-2023)
#117
Member
![Talking](https://mbworld.org/forums/images/icons/icon10.gif)
@Sid, do you mind sharing the link or seller you purchased the bumper from? Please and Thank you!!
The following users liked this post:
benzw205 (06-01-2023)
#118
MBWorld Fanatic!
Thread Starter
Wait, Keith, I thought you had to remove/replace your old ones from your old bumper onto the new bumper? Well ****, if Sid didn't have to remove/replace any internal components, I might end up using the same seller that he bought the bumper from hehehe!!
@Sid, do you mind sharing the link or seller you purchased the bumper from? Please and Thank you!!
@Sid, do you mind sharing the link or seller you purchased the bumper from? Please and Thank you!!
I think Sid got his from the same seller I did (?)
The following 2 users liked this post by Keith66:
benzw205 (06-01-2023),
Kush Desai (04-26-2023)
The following 2 users liked this post by Keith66:
benzw205 (06-01-2023),
Kush Desai (04-26-2023)
#120
Member
yup used the same seller only thing I used from original bumper was the grill, rubber gasket for hood and the liner that goes around the inside of grill.
The following 2 users liked this post by sidsidhu:
benzw205 (06-01-2023),
Kush Desai (04-26-2023)
#121
MBWorld Fanatic!
like i said in the other topic, looks amazing but careful with stones going past those huge gaps in the grills. the intercooler is rather fragile for stone impacts
#122
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Hello im wondering to make an exhaust cutout on Mercedes c350e but I don't know what the diameter of the exhaust pipe is, and I'm wondering how It is to wire it, if its good enough to wire the battery or the 12v socekt and if anyone know what cable it is on the socket if i need to connect to that.
The following users liked this post:
benzw205 (06-01-2023)
#123
Out Of Control!!
Join Date: Dec 2019
Location: Yours to Discover
Posts: 13,749
Received 2,619 Likes
on
2,227 Posts
PFL205.064 with M276.823 (Oil pump solenoid defeated)