Rear Window Power Issue
#1
Newbie
Thread Starter
Join Date: Sep 2019
Location: Upstate, NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
2015 MB C300 4matic sedan
Rear Window Power Issue
I noticed on '15 c300 that my left rear window will go down but will not raise with either window switch. If I use the key fob to raise the windows, it then closes.
What could be causing this and is there something I could do to reset it?
What could be causing this and is there something I could do to reset it?
#4
Yes I did, unfortunately I can't provide you with a pic as I traded the car in. The fit, feel and finish was on par with OEM if not better as the light appeared to shine through better during the night.
#6
Newbie
Thread Starter
Join Date: Sep 2019
Location: Upstate, NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
2015 MB C300 4matic sedan
When removing the switch, do you have to first remove the trim bezel or will they both come out together?
The video doesn't really specify that.
The video doesn't really specify that.
#7
The trim comes out first from what I remember, it was a bit snug inside so I used a heat gun to make sure it doesn't break on its way out.
Trending Topics
#8
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,430
Received 3,364 Likes
on
2,238 Posts
MY'14 W212 M276 3.5NA @55kMi
door buttons
If you don't own a scanner buy one!
The door modules, buttons, windows and locks are starting to cause problems ... a scanner will save you time.
Aboid rain on these buttons, tiny circuit traces are easy to bridge with oxidation then they act up.
The door modules, buttons, windows and locks are starting to cause problems ... a scanner will save you time.
Aboid rain on these buttons, tiny circuit traces are easy to bridge with oxidation then they act up.