20" Vossen VVS-CV4 in Matte Graphite on Matte Bronze W218





Also, shout out to Sean at Wheel Specialists and Bob at EuroWheelsUSA for customizing the offsets and stuffing 305's in the rear!
Last edited by kompressed one; Jun 29, 2012 at 03:25 AM.
Not bad color though... still wanna see a matte gold AMG like the one I saw in Europe on a non-AMG CLS
Thanks for the feedback.
Trending Topics
The Best of Mercedes & AMG
is the car lowered or stock




The Pirellis in 303x30x20 run about or at 27 inches... you are 1 inch too tall overall and while it may fit your speedo will be off.. Im sure its not going to be detrimental but plus sizing was invented for a reason.
and it all looks decent, just drop it, but consider what Vic said, and in my OP, change the tires.... again.
Vic, I live in costa mesa, so maybe you can help me out with a couple of my questions pertaining to getting mods done locally and where I can get work done. I recently picked up the new CLS63 (my first MB) and I'm planning on putting the same Vossen graphite matte wheels on my white car. I know Kompressed went through some hell finding the right tires, etc.. I'm planning on the Vossen cv4's 20x9 255/30 and 20x10.5 on 305/25's - is this the right setup-it's what vossen has all over their site? Kompressed, what did you have to do for the custom spacers? I live in orange county, VIC or anyone know a good place I can get my ride lowered, Renntech ECU, and the vossen wheels&tires put on? I know brabus is located here, but I'm sure their shop time is ridiculous, and I don't want to use their tuning anyway. I'm new to the modern car mods, prior to this car i've dealt mostly with pre-70's. So any help is appreciated. It looks like alot of the tuning is plug and play, is that the case or should I just leave these modern tech engines to the guys with computers. thx - Paul
The tires the shop installed are 255/35 and 305/25.
Are the fronts tires too big? Could this be an issue for the car? Someone above mentioned something about stock diameter?








