What are your best times at the drag strip?
#426
MBWorld Fanatic!
#428
MBWorld Fanatic!
they have an insane amount of grip even when they're cold. They're pretty quiet but the only thing is that they barely and i mean barely fit the wheel well. I rub pretty much everywhere I go even when its just me in the car...I wouldn't recommend the size that I have 285/18/35 unless you somehow have pounded out your fenders (not just rolled) though.
#429
Ran a 8.64 1/8th mile, which is just under .3 seconds better than before, only difference was a newer tire, and a wider tire. (bald 245->new 255). I was really happy with the improvement, but of course since the last run, my friend had done some go fast bits to his WRX, which jumped from running a 9.1 to a 8.62, making his car "officially" faster on an 1/8th mile, and I haven't heard the end of that one. Cannot wait to take it to a quarter mile track.
On a side note, I tried to take out the spare to see if the weight difference would help me shave off .02 seconds, and I found that I couldn't get traction for ****? Needless to say I was surprised that that amount of weight loss caused me to be almost unable to put down traction.
On a side note, I tried to take out the spare to see if the weight difference would help me shave off .02 seconds, and I found that I couldn't get traction for ****? Needless to say I was surprised that that amount of weight loss caused me to be almost unable to put down traction.
#431
Newbie
Join Date: Nov 2006
Location: Middle of Nowhere
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
C55 ///AMG
#436
MBWorld Fanatic!
#438
MBWorld Fanatic!
Do you guys think it's possible to run 12's with these mods??
VRP tune ~10whp/10wtq
Resonator/2ndary cats deleted
IC isolation kit
Eurocharged heat exchanger
Johnson cm30
On 19" wheels
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
VRP tune ~10whp/10wtq
Resonator/2ndary cats deleted
IC isolation kit
Eurocharged heat exchanger
Johnson cm30
On 19" wheels
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#441
Senior Member
Join Date: Nov 2005
Location: Morehead, KY USA
Posts: 396
Likes: 0
Received 3 Likes
on
2 Posts
SLK55 AMG, E320 BlueTec, ML350, (formerly) C32 AMG, MR2 Turbo, HD-FLH-FSE, BMW R100RS, Ducati M900
ET's
13.19 ET @ 106 mph
Temp 47 deg F
Tires Fusion ZRi street tires, no traction in 1st
Ran heads up to an E92 M3 V8 and I lead at the 1/8th mi pole, but he reeled me in on the big end and won by a car. Still not bad for a heavy V6 C32
Irish
Temp 47 deg F
Tires Fusion ZRi street tires, no traction in 1st
Ran heads up to an E92 M3 V8 and I lead at the 1/8th mi pole, but he reeled me in on the big end and won by a car. Still not bad for a heavy V6 C32
Irish
#443
MBWorld Fanatic!
yeah I installed the 185, Tune, and full SL55 intake. ALthough, I havent had a chance to make it to the track
most of my mods are listed in my sig I think...I wonder what I'd run now
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
#444
My new best run
12.2@114 in AZ this weekend.
Stock C55, 130,000 miles + 100 shot of NOS + MT drag radials.
I haven't got the video of the 12.2 run uploaded yet, but here is my previous 12.4 @ 112 run
http://www.youtube.com/watch?v=c-wUSRoUXYI
12.2@114 in AZ this weekend.
Stock C55, 130,000 miles + 100 shot of NOS + MT drag radials.
I haven't got the video of the 12.2 run uploaded yet, but here is my previous 12.4 @ 112 run
http://www.youtube.com/watch?v=c-wUSRoUXYI
#445
Senior Member
Join Date: Jul 2004
Location: Salt Lake City
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
C32, 911 SC
#446
No, I used the jet sizes on the zex site for the 5.0 mustang (new one). a/f looks good to redline. I'm going to upgrade the tranny and add more nos with race gas (for insurance)
#447
supposedly my car ran a 13.6 stock with 19's.
I'm hoping to get a run in this year w/ 185mm/EC tune/C3P intake/EC HE/PSK, etc.
I'm going over maintenance and solving other issues to make sure its perfect so maybe we'll see. I also will be at Bristol Dragway in TN, so the times are usually a tenth or 2 slower then other tracks. We shall see fellers.
I'm hoping to get a run in this year w/ 185mm/EC tune/C3P intake/EC HE/PSK, etc.
I'm going over maintenance and solving other issues to make sure its perfect so maybe we'll see. I also will be at Bristol Dragway in TN, so the times are usually a tenth or 2 slower then other tracks. We shall see fellers.
#448
MBWorld Fanatic!
The drag way opened up again and got to run with the new heat exchanger and improved eurocharged tune. Best run was against modified Mach1 mustang. Decided to do a burnout for better traction. 1st, 2nd, rolled out in 3rd. Tons of smoke! Track is at 5500FT. Equals out to around a 50HP loss. Best run last year was 13.91
R/T: 0.18
1/4: 13.456
MPH: 106
The Mach1 ran a 14.1
R/T: 0.18
1/4: 13.456
MPH: 106
The Mach1 ran a 14.1