Got my LET C32 Pully kit!
#26
Member
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
Thanks for the info Clk&Slk, that is really useful ...... if anyone has any pics of the gearbox can they post them, so we can see where the access to the torque convertor is.
#27
Ted
#28
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2004
Location: Diamond Bar & Anaheim, CA
Posts: 1,194
Likes: 0
Received 2 Likes
on
2 Posts
2003 C-Class Sportcoupe
.............I just go through looking at the engine bay of a C32 for the first time. A guy brought his over for me to see. As far as I can tell, the idler pulley is smooth and not ribbed. The alternator and power steering pullies are 8 ribbed pullies. Am I correct? Thanks.
Ted
Ted
#29
...........Thanks!! Now the real question is; Do you think I can swap my W210 E55 single 6 rib belt system with a C32 single 8 rib belt system by swapping all the pullies. Assume that I have a brand spanking newly rebuilt W210 E55 engine with 8.5:1 compression with a Kleemann s/c, and I wish to take advantage of the various C32 higher boos crank pullies. Yes, I already have an 8 rib s/c pulley. Vary eager to hear your reply. Thanks.
Ted
Ted
#30
...........Thanks!! Now the real question is; Do you think I can swap my W210 E55 single 6 rib belt system with a C32 single 8 rib belt system by swapping all the pullies. Assume that I have a brand spanking newly rebuilt W210 E55 engine with 8.5:1 compression with a Kleemann s/c, and I wish to take advantage of the various C32 higher boos crank pullies. Yes, I already have an 8 rib s/c pulley. Vary eager to hear your reply. Thanks.
Ted
Ted
#31
Ted
Last edited by Ted Baldwin; 11-10-2007 at 09:06 PM.
#32
.............Good tip. Thanks! I am definitely going to try this. I don't mind swapping the ac compressor. If I can consent to having my entire engine rebuilt, swapping an ac compressor will be no big deal. I was mostly concerned about harmonic balance between the V6 crank pulley vs the v8 crank pulley. However I notice that most Mercedes V6 and V8 engines use the same oem crank pulley.
Ted
Ted
yes, but having your engine rebuilt is much different than trying to fabricate new brackets so that all the accesories line up correctly along with making sure the belt is routed correctly over a ribbed or a smooth surface... you may want to do some research before you start purchasing these items...a new A/C compressor for the C32 is $1150.00 if i remember correctly...
#33
Unfortunatly I don't acess to an air gun at all ........ and with the stock/asp pulleys you can lock the crank with the holes in the pulley and remove it with a normal ratchet .... if there is any way to lock the crank and get the LET pulley on and off at home with a ratchet i would go for it
![](http://www.letmotorsports.com/projects/install/pulley/65.jpg)
#34
That's what I am concerned about. Will the pulley put stress on the blower in a long run? also, does the LET pulley need to run with a ecu tunning?
#37
yes, but having your engine rebuilt is much different than trying to fabricate new brackets so that all the accesories line up correctly along with making sure the belt is routed correctly over a ribbed or a smooth surface... you may want to do some research before you start purchasing these items...a new A/C compressor for the C32 is $1150.00 if i remember correctly...
................understood. I am not going to be doing this with my own hands. I have absolutely no illusion that this is going to work. If the project works, it will be great. If not, the old pullies go back on and the C32 parts go on ebay. That part is not a problem.
.........My questions were to determine if it is feasible. I know that an AC compressor is expensive. I recently had one changed on my CLK for the same price. Unfortunately for those that choose to modify their cars, having to change an Ac compressor is not daunting if the overall project is feasible. The power steering pulley is also sold as a unit at the dealer. It is not sold separately. One can probably go the aftermarket route and purchase a complete stage one C32 kit and a new AC compressor. Thank you for your input.
Ted
Last edited by Ted Baldwin; 11-11-2007 at 03:20 AM.
#38
SPONSOR
#41
Super Member
Join Date: Oct 2002
Location: Atlanta, GA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
SLK32
................understood. I am not going to be doing this with my own hands. I have absolutely no illusion that this is going to work. If the project works, it will be great. If not, the old pullies go back on and the C32 parts go on ebay. That part is not a problem.
Let me know if you need stock pullies. I have my pulley's (crank, idler, water pump) from my SLK32 in the garage. The crank pulley was replaced under warranty and has a couple of hundred miles on it.
If you are interested I am sure we can work something out and I can talk with Rich about getting the pulley's over to the shop.
#43
SPONSOR
#44
Super Member
Join Date: Oct 2002
Location: Atlanta, GA
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
SLK32
I have heard rumors that LET will build headers for the SLK32/320 in the future. But right now the only option is Steve's headers.
I am very much looking forward to my LET pulleys. They look and sound like a great product.
I am very much looking forward to my LET pulleys. They look and sound like a great product.
#45
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#46
Member
Join Date: Nov 2006
Location: Brisbane, Australia
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
C32
The following link is an writeup with pics of an ASP pully onto a CLS55 ... do we have the same gearbox as them, so the Torque Convertor hole that you guys talked about will be the same as in these pics ....... also did you need the puller to get it off initially?
https://mbworld.org/forums/c219/182513-installation-asp-pulley-pics.html#post2030131
https://mbworld.org/forums/c219/182513-installation-asp-pulley-pics.html#post2030131
Last edited by steve_bris; 11-14-2007 at 05:24 AM.
#47
The following link is an writeup with pics of an ASP pully onto a CLS55 ... do we have the same gearbox as them, so the Torque Convertor hole that you guys talked about will be the same as in these pics ....... also did you need the puller to get it off initially?
https://mbworld.org/forums/showthread.php?p=2030131
https://mbworld.org/forums/showthread.php?p=2030131
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#50