Evosport Pulley Kit Install, PLEASE HELP!
09-28-2007, 02:19 AM
#1
MBWorld Fanatic!
Thread Starter
Evosport Pulley Kit Install, PLEASE HELP!
my buddies and i are putting on the different pulleys right now. we are having a problem
we dont know what the following things are for or where they go. does anyone know what or where these pieces go?
we dont know what the following things are for or where they go. does anyone know what or where these pieces go?
09-28-2007, 02:32 AM
#2
MBWorld Fanatic!
Thread Starter
the black pulley that is red on the inside says, "6203LU"
figured out the number is on the bearing....but where does the pulley go?
figured out the number is on the bearing....but where does the pulley go?
Last edited by jturkel; 09-28-2007 at 03:11 AM.
09-28-2007, 03:09 AM
#3
MBWorld Fanatic!
Thread Starter
does anyone have a picture of a before view of all the pulleys and an after view with all the changed pulleys (preferably labeled?) That would a great help
09-28-2007, 04:36 AM
#4
Newbie
Join Date: Sep 2007
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
C32AMG
It has been quite some time since I had an Evosport pulley kit on my C32, but I believe the pulley pictured is the upper idler/tensioner pulley.
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
09-28-2007, 04:53 AM
#5
MBWorld Fanatic!
Thread Starter
It has been quite some time since I had an Evosport pulley kit on my C32, but I believe the pulley pictured is the upper idler/tensioner pulley.
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
09-28-2007, 07:34 AM
#7
MBWorld Fanatic!
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
2008 A8L, 2002 996TT X50, 2009 X5
It has been quite some time since I had an Evosport pulley kit on my C32, but I believe the pulley pictured is the upper idler/tensioner pulley.
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
544 rwhp dyno figure for your C32? If so, congrats! (and yikes... that's gotta be the highest I've seen or heard of, by far...)
Trending Topics
09-28-2007, 09:42 AM
#8
MBWorld Fanatic!
It has been quite some time since I had an Evosport pulley kit on my C32, but I believe the pulley pictured is the upper idler/tensioner pulley.
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
Unfortunately, I do not have pictures of my old setup with the pulley kit. My new setup includes a large custom fit/trim Kenne Bell Supercharger and different pulleys.
Hope this helped.
Ron
I got to see this one, PICTURES PLEASE
I had a whipple/KB on my stang and loved her, only got 518 out of her with EVERYTHING aftermarket. What did you do to get 544?
WOW
See yeah
09-28-2007, 12:23 PM
#9
MBWorld Fanatic!
Thread Starter
i dont mean to ruin the fun because 544WHPC32's car sounds ridiculously nasty fast, but can we try and stay on topic in this threat and perhaps talk about that in another?
But does anyone have a picture or diagram of where each of the pulleys go (stock and evosport)?
But does anyone have a picture or diagram of where each of the pulleys go (stock and evosport)?
09-28-2007, 01:12 PM
#11
MBWorld Fanatic!
Thread Starter
well, it was kind of difficult to call evosport last night at 11 pm. I emailed them last night though and Dale promptly emailed me an instruction manual (thank you Dale!). However, the instruction manual does not say where each pulley goes. All it says about pulleys is: "Pulleys installation is very straightforward. Just replace factory pulleys with the ones in the kit. Use 85 ft.lbs. to torque crankshaft pulley bolt. Large tensioner pulley on some car can be trimmed on the inside if it interferes with casting flash on the tensioner."
It does have a picture of all the pulleys included. However, the pulley that I am not sure about does not really look like any of the pulleys in the picture provided.
It does have a picture of all the pulleys included. However, the pulley that I am not sure about does not really look like any of the pulleys in the picture provided.
09-28-2007, 03:06 PM
#12
SPONSOR
The pulley in the picture at the top is the idler pulley and is located next to the Supercharger pulley...on the left. Take that pulley off and you will find the other parts above. One is a spacer and the other is a pulley bearing cover.
See pic - The pulley is located behind the silver intercooler lines.
See pic - The pulley is located behind the silver intercooler lines.
Last edited by sales@eurocharged.com; 09-28-2007 at 03:09 PM.
