::: Code3 Performance C32 Heat Exchanger on Sale :::
Thread Starter
Banned
Joined: Sep 2006
Posts: 973
Likes: 1
From: Santa Barbara & Los Angeles, CA
C32, Cobra, 700hp Vespa
::: Code3 Performance C32 Heat Exchanger on Sale :::
Post in the sponsor forum
Click here to be taken to the product page at Code3 Performance
Please check out the pictures below the ad for a great look at the best heat exchanger on the market.
Click here to be taken to the product page at Code3 Performance
Please check out the pictures below the ad for a great look at the best heat exchanger on the market.
MBWorld Fanatic!
Joined: Jun 2006
Posts: 1,934
Likes: 1
From: Chicago
04 C32
It looks like the picture in the thread has the black piece Photoshopped out. I won't install one if it has that piece in the way.
Thread Starter
Banned
Joined: Sep 2006
Posts: 973
Likes: 1
From: Santa Barbara & Los Angeles, CA
C32, Cobra, 700hp Vespa
Yes, I have a clear replacement for the bumper support that will be available. Although the lower valance is plenty supported without it. You can either cut it out, or replace it with the clear piece.
MBWorld Fanatic!
Joined: Apr 2004
Posts: 1,614
Likes: 2
From: sf
Merc power
MBWorld Fanatic!
Joined: Jan 2007
Posts: 3,342
Likes: 11
From: PA
S600, GL450, GLC 43
[QUOTE=Code3 Performance;2505608][CENTER
Okay guys, being one of the first PROUD owners of code3's HE I just wanted to drop a few lines:
1. The quality of this unit is AMAZING! The welds, material used, etc, was a VERY well thought of item, NOT a build it in your back yard or tweak an existing piece. This unit looks FANTASTIC, heck I even have it sitting on my dining room table until I install at the end of the month. IT LOOKS THAT GOOD, even with the wifey complaining
2. The packaging was VERY well designed as well, even going to the extremes of using two little wooden handles to protect the mounting tabs from the THROWERS, aka USPS. My hat is tip to code3 for thinking of this point.
3. Brandon stayed in CONSTANT comunication with me from the day of the order, till the day he shipped it. Heck, I had to delete about 30 messages from my PM box so it wouldn't lock up. Anothe GREAT way to keep customers happy, atleast me that is.
4. The quality of the unit, size increase for cooling, and price makes this piece a NO BRAINER GUYS! Did I mention he is one of our sponsors now, SUPPORT OUR SITE!
Oh well, I guess what I wanted everyone to know was THAT YOU WILL NOT BE DISPOINTED WITH CODE3'S WORK! PERIOD!
See yeah
Okay guys, being one of the first PROUD owners of code3's HE I just wanted to drop a few lines:
1. The quality of this unit is AMAZING! The welds, material used, etc, was a VERY well thought of item, NOT a build it in your back yard or tweak an existing piece. This unit looks FANTASTIC, heck I even have it sitting on my dining room table until I install at the end of the month. IT LOOKS THAT GOOD, even with the wifey complaining
2. The packaging was VERY well designed as well, even going to the extremes of using two little wooden handles to protect the mounting tabs from the THROWERS, aka USPS. My hat is tip to code3 for thinking of this point.
3. Brandon stayed in CONSTANT comunication with me from the day of the order, till the day he shipped it. Heck, I had to delete about 30 messages from my PM box so it wouldn't lock up. Anothe GREAT way to keep customers happy, atleast me that is.
4. The quality of the unit, size increase for cooling, and price makes this piece a NO BRAINER GUYS! Did I mention he is one of our sponsors now, SUPPORT OUR SITE!
Oh well, I guess what I wanted everyone to know was THAT YOU WILL NOT BE DISPOINTED WITH CODE3'S WORK! PERIOD!
See yeah
Last edited by MRAMG1; Nov 16, 2007 at 09:06 AM.
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Nov 2003
Posts: 1,067
Likes: 5
From: MILFORD,CT
E36M3 race car/Ferrari F355 GTS/1973 Mini 1275GT/Fiat Abarth/ML63/SLK55
[QUOTE=MRAMG1;2506628]
SECONDED! Brandon's HE was a great piece of kit. install was piece of cake (as reported by my tech). I can say now by butt dyno that my car is making more power than before. i have the 030 johnson pump as well...i can't wait to try this combi on the track next year.....
[CENTER
Okay guys, being one of the first PROUD owners of code3's HE I just wanted to drop a few lines:
1. The quality of this unit is AMAZING! The welds, material used, etc, was a VERY well thought of item, NOT a build it in your back yard or tweak an existing piece. This unit looks FANTASTIC, heck I even have it sitting on my dining room table until I install at the end of the month. IT LOOKS THAT GOOD, even with the wifey complaining
2. The packaging was VERY well designed as well, even going to the extremes of using two little wooden handles to protect the mounting tabs from the THROWERS, aka USPS. My hat is tip to code3 for thinking of this point.
3. Brandon stayed in CONSTANT comunication with me from the day of the order, till the day he shipped it. Heck, I had to delete about 30 messages from my PM box so it wouldn't lock up. Anothe GREAT way to keep customers happy, atleast me that is.
4. The quality of the unit, size increase for cooling, and price makes this piece a NO BRAINER GUYS! Did I mention he is one of our sponsors now, SUPPORT OUR SITE!
Oh well, I guess what I wanted everyone to know was THAT YOU WILL NOT BE DISPOINTED WITH CODE3'S WORK! PERIOD!
See yeah
Okay guys, being one of the first PROUD owners of code3's HE I just wanted to drop a few lines:
1. The quality of this unit is AMAZING! The welds, material used, etc, was a VERY well thought of item, NOT a build it in your back yard or tweak an existing piece. This unit looks FANTASTIC, heck I even have it sitting on my dining room table until I install at the end of the month. IT LOOKS THAT GOOD, even with the wifey complaining
2. The packaging was VERY well designed as well, even going to the extremes of using two little wooden handles to protect the mounting tabs from the THROWERS, aka USPS. My hat is tip to code3 for thinking of this point.
3. Brandon stayed in CONSTANT comunication with me from the day of the order, till the day he shipped it. Heck, I had to delete about 30 messages from my PM box so it wouldn't lock up. Anothe GREAT way to keep customers happy, atleast me that is.
4. The quality of the unit, size increase for cooling, and price makes this piece a NO BRAINER GUYS! Did I mention he is one of our sponsors now, SUPPORT OUR SITE!
Oh well, I guess what I wanted everyone to know was THAT YOU WILL NOT BE DISPOINTED WITH CODE3'S WORK! PERIOD!
See yeah
MBWorld Fanatic!
Joined: Oct 2006
Posts: 4,856
Likes: 4
02 C32 AMG
[QUOTE=AWDman;2507522]the heat exchanger makes more power for the car? i thought it just kept the temps down so the car ran its max power more consistently.
MBWorld Fanatic!
Joined: Oct 2006
Posts: 4,856
Likes: 4
02 C32 AMG
Thread Starter
Banned
Joined: Sep 2006
Posts: 973
Likes: 1
From: Santa Barbara & Los Angeles, CA
C32, Cobra, 700hp Vespa
I have two international customers (Sweden, Australia) that wanted the clear piece with their HE. So I am just throwing the setup in their box. Truthfully, its really not needed. Some people asked me to sell it for the piece of mind factor, so I will still make it available. The opening is so small, even with the brace cut, it doesn't seem to make any structural difference. But I have them made and ready to go. If you need one, just ask, and I will include it at no extra charge for a limited time. You still need to cut the OE support piece, and then bolt the new piece in. Its a 5 minute job when the bumper is off.
Senior Member
Joined: Sep 2005
Posts: 446
Likes: 1
From: Home is Stockholm, Sweden. But my work takes me around the world, right now I work/live in Laos, South East Asia.
C32 T 2003. Mods? MANY!! :)
All I can say, the customer care that Brandon have are the best I have encountered! Looking forward to promote Code3performance here in Sweden when ever people are asking me about where I got the HE from! 
Keep up the good work Brandon!
Keep up the good work Brandon!
MBWorld Fanatic!
Joined: Apr 2004
Posts: 1,614
Likes: 2
From: sf
Merc power
Member
Joined: Jun 2006
Posts: 124
Likes: 0
From: Canada
c32 AMG
Code 3
Dumb Question.. But here it goes anyway..very interested in the Heat Exchanger and was wondering if u had a site or a copy of Mechanical instructions for the not soo savy mechanics such as myself..
I here it is easy but it would be a big help..
thanks
Dumb Question.. But here it goes anyway..very interested in the Heat Exchanger and was wondering if u had a site or a copy of Mechanical instructions for the not soo savy mechanics such as myself..
I here it is easy but it would be a big help..
thanks
Thread Starter
Banned
Joined: Sep 2006
Posts: 973
Likes: 1
From: Santa Barbara & Los Angeles, CA
C32, Cobra, 700hp Vespa
PM sent Tectite
Bryan, it looks great, and it will perform even better. It increases fluid capacity on its own almost a 1/2 gallon, which is very significant. Its like its own reservoir, except that most of the fluid is actively being cooled. There is a reason that "bar and plate" cores are the preferred choice for most performance heat exchanging applications, whether its air to air, or air to water. They simply perform better in every way. Glad to hear it fit perfect!
These are still on sale. There is no run of units. We continually make these units, and we are finally getting ahead so we can stock them for immediate delivery.
Bryan, it looks great, and it will perform even better. It increases fluid capacity on its own almost a 1/2 gallon, which is very significant. Its like its own reservoir, except that most of the fluid is actively being cooled. There is a reason that "bar and plate" cores are the preferred choice for most performance heat exchanging applications, whether its air to air, or air to water. They simply perform better in every way. Glad to hear it fit perfect!
These are still on sale. There is no run of units. We continually make these units, and we are finally getting ahead so we can stock them for immediate delivery.
MBWorld Fanatic!
Joined: Aug 2005
Posts: 3,466
Likes: 10
From: Southern Cali (Ontario)
it should be a 2 hour job.. max... probably need to cool down the coolant before working on it...
its a plug and play HE..
MBWorld Fanatic!
Joined: Apr 2004
Posts: 1,614
Likes: 2
From: sf
Merc power
