**Black Series Rear Diffuser for C55!!!!**
#1
Almost a Member!
Thread Starter
Join Date: Apr 2008
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
2005 c55
**Black Series Rear Diffuser for C55!!!!**
Hey guys-
I was looking online and I got redirected back to an MB World SLK 55 forum where they were talking about a rear diffuser for it like the one on the CLK 63 BS. In there someone asked about one for the C55 (something close to what the picture shows) and the guy from Euroteck said that if a good amount of demand for it shown then they would probably produce one. I AM DEFINITLY INTERESTED Please post here you are interested. Hopefully with this it can be enough for the guys at Euroteck to REALLY CONSIDER IT'S PRODUCTION. DO YOU KNOW/REALIZE HOW BAD THAT WOULD MAKE OUR CARS LOOK??!!?!
BTW I will also post this on the private lounge so in case you run into it you will know its the same.
I was looking online and I got redirected back to an MB World SLK 55 forum where they were talking about a rear diffuser for it like the one on the CLK 63 BS. In there someone asked about one for the C55 (something close to what the picture shows) and the guy from Euroteck said that if a good amount of demand for it shown then they would probably produce one. I AM DEFINITLY INTERESTED Please post here you are interested. Hopefully with this it can be enough for the guys at Euroteck to REALLY CONSIDER IT'S PRODUCTION. DO YOU KNOW/REALIZE HOW BAD THAT WOULD MAKE OUR CARS LOOK??!!?!
BTW I will also post this on the private lounge so in case you run into it you will know its the same.
#2
MBWorld Fanatic!
Trending Topics
#12
I would be interested as well. I asked Neal last week via msg and he wasn't sure if they had the time to do it. How long will it take for a prototype to be made? I don't want to miss out on the other buy if they aren't definitely going to do it.
#13
Almost a Member!
Thread Starter
Join Date: Apr 2008
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
2005 c55
Guys I spoke with niel and my car will be the mule for this job. I we can get some people we can "get er dun"
__________________
hey guys on an email that I sent tls1212 he stated that his friend may not do a cf due to the cost.....in the other thread there is about 14 people including myslef that are inerested would that be enough????
__________________
hey guys on an email that I sent tls1212 he stated that his friend may not do a cf due to the cost.....in the other thread there is about 14 people including myslef that are inerested would that be enough????
#14
Junior Member
Join Date: Mar 2008
Location: Toronto
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
2005 Mercedes C55 AMG
Quick question everyone and sorry if it's a dumb one, other than looks does the diffuser give some type of downforce? Just curious to what it does?
Plus, is this going to be something solid that you can bolt on or something or is it installed by tape?
Agreed that Carbon Fiber or even painted look would be ideal. The rubber just seems a bit too cheap.
Plus, is this going to be something solid that you can bolt on or something or is it installed by tape?
Agreed that Carbon Fiber or even painted look would be ideal. The rubber just seems a bit too cheap.
#16
Junior Member
Join Date: Jun 2008
Location: Illinois
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
2013 ML550 - Brabus Kit, Brabus Springs, 22" Rotec (Black), 2015 X5 M-Sport, CF M-Performance Kit
Dude Neal make this happen - the front end of car looks dope - lets give it some "A**".
#20
Former Vendor of MBWorld
Hey Guys, good to see some interest. But as we know the C55 and C32 would both need different diffusers. Whats the break down of who has or wants what? Another words, which car has more interest? or is it pretty even? Thing is, these take time to do. You would not see a finished part for about 2 months most likely. And I would want to know which to start on. Price would be anywhere from $500-$600.
#21
Hey Guys, good to see some interest. But as we know the C55 and C32 would both need different diffusers. Whats the break down of who has or wants what? Another words, which car has more interest? or is it pretty even? Thing is, these take time to do. You would not see a finished part for about 2 months most likely. And I would want to know which to start on. Price would be anywhere from $500-$600.
C32 List:
1. AirFrcd
2.
3.
4.
5.
6.
7.
8.
8.
10.