C32T Winter Project, 7-800Hp
#335
Super Member
Join Date: Dec 2008
Location: MD
Posts: 526
Likes: 0
Received 1 Like
on
1 Post
2007 C230 and 1985 Monte SS
So the intake charge will exit the supercharger from the rear, piping will bring it to the front mount intercooler, and then it will enter the plenum from the front?
I hope that scram is doing some CFD on that plenum, we designed intakes and plenums for our FSAE car and you would be amazed at how certain cylinders can become starved by a plenum design. We had a log intake on an inline 4 cylinder Honda CBR 600 f4i motor, and the log was fed from the center by the restrictor/diffuser. The inside two cylinders would seem to be the ones to get more air, but it was actually the opposite. There was a swirling affect going on that our fluid dynamics modeling showed, and the same was true in practice.
I hope that scram is doing some CFD on that plenum, we designed intakes and plenums for our FSAE car and you would be amazed at how certain cylinders can become starved by a plenum design. We had a log intake on an inline 4 cylinder Honda CBR 600 f4i motor, and the log was fed from the center by the restrictor/diffuser. The inside two cylinders would seem to be the ones to get more air, but it was actually the opposite. There was a swirling affect going on that our fluid dynamics modeling showed, and the same was true in practice.
#336
Senior Member
Thread Starter
Join Date: Sep 2005
Location: Home is Stockholm, Sweden. But my work takes me around the world, right now I work/live in Laos, South East Asia.
Posts: 446
Likes: 0
Received 1 Like
on
1 Post
C32 T 2003. Mods? MANY!! :)
So the intake charge will exit the supercharger from the rear, piping will bring it to the front mount intercooler, and then it will enter the plenum from the front?
I hope that scram is doing some CFD on that plenum, we designed intakes and plenums for our FSAE car and you would be amazed at how certain cylinders can become starved by a plenum design. We had a log intake on an inline 4 cylinder Honda CBR 600 f4i motor, and the log was fed from the center by the restrictor/diffuser. The inside two cylinders would seem to be the ones to get more air, but it was actually the opposite. There was a swirling affect going on that our fluid dynamics modeling showed, and the same was true in practice.
I hope that scram is doing some CFD on that plenum, we designed intakes and plenums for our FSAE car and you would be amazed at how certain cylinders can become starved by a plenum design. We had a log intake on an inline 4 cylinder Honda CBR 600 f4i motor, and the log was fed from the center by the restrictor/diffuser. The inside two cylinders would seem to be the ones to get more air, but it was actually the opposite. There was a swirling affect going on that our fluid dynamics modeling showed, and the same was true in practice.
#337
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
More of a question, but doesn't the dynamics of pleneum design have less effect when under a good amount of pressure? compared to N/A where there isn't...? thought I read that somewhere..
MIDO, your project is great. Keep it up. Looking foward to seeing the matte silver paint
MIDO, your project is great. Keep it up. Looking foward to seeing the matte silver paint
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#338
Senior Member
Thread Starter
Join Date: Sep 2005
Location: Home is Stockholm, Sweden. But my work takes me around the world, right now I work/live in Laos, South East Asia.
Posts: 446
Likes: 0
Received 1 Like
on
1 Post
C32 T 2003. Mods? MANY!! :)
More of a question, but doesn't the dynamics of pleneum design have less effect when under a good amount of pressure? compared to N/A where there isn't...? thought I read that somewhere..
MIDO, your project is great. Keep it up. Looking foward to seeing the matte silver paint![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
MIDO, your project is great. Keep it up. Looking foward to seeing the matte silver paint
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#341
Senior Member
Thread Starter
Join Date: Sep 2005
Location: Home is Stockholm, Sweden. But my work takes me around the world, right now I work/live in Laos, South East Asia.
Posts: 446
Likes: 0
Received 1 Like
on
1 Post
C32 T 2003. Mods? MANY!! :)
Ok guys, I'm going down to SCRAM in Göteborg tomorrow to at least have a look on the car...Will try to take a lot of photos.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#342
MBWorld Fanatic!
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
2008 A8L, 2002 996TT X50, 2009 X5
#344
Senior Member
Thread Starter
Join Date: Sep 2005
Location: Home is Stockholm, Sweden. But my work takes me around the world, right now I work/live in Laos, South East Asia.
Posts: 446
Likes: 0
Received 1 Like
on
1 Post
C32 T 2003. Mods? MANY!! :)
Some photos from today at SCRAM....What you guys think?
#346
Super Member