danielemccabe

Guys, i can't believe I can't find this but, can someone please give me a link or instructions on removing the rear rotors on my C32????? i'm working on it now, and I really need some help. I'm think it could just be stuck, but I think there may be a parking break to loosen.

HEEEEEELPPP??? THE CAR IS ON THE JACKS RIGHT NOW.

1qikctr

tools ur need,16mm for the two bolts behind the rear rotors, 1/8 inch tool to strike out the pins which locks the ( dual pistons caliper). screw driver to take the rotors screws off, hammer to knock out the old ones on the car.

splinter

Verify that your parking brake is released...

danielemccabe

I'VE got everything off- the caliper bolts, the sensor bolts, and the torx screw in the rotor face. how hard to i have to wack this thing? is there something i have to do with the parking break????

1qikctr

This is best i can do with cs3 draw up

1qikctr

you can hit it on the facing of the rotors (try front and back if its stuck really good), thats how i get my out just go easy on it.... dont hit it too hard it will crack the rotors.

ScottW911

I did the same thing. Then I pounded on it with a mallet for 2 hours (to no avail). Then I opened my driver's door and pulled the parking brake release. The rotor fell off. Did I feel like a dumb*ss.

1qikctr

scott

danielemccabe

i finally got them both. the parking break wheel (star) adjuster was frozen. i am putting new rotors on so, i smacked the **** out of rotor and it came off. thanks guys.