Performance Parts from L.E.T.

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Apr 17, 2009 | 08:15 AM

H13BS M

Thread Starter

Junior Member

Joined: Jun 2008

Posts: 44

Likes: 0

From: Wokingham,Berkshire, England

2002 Mercedes Benz C32 AMG

Performance Parts from L.E.T.

Hi there, was just wondering what people thought of the following parts, and if they are staright fitment for the c32 amg (no modification needed)

Code 3 heat exchange3

Johnson cm30 intercooler coolent pump

Also if i want to get a performance pulley.Which one would be better with the 2 above parts:

code 3 supercharger pulley

LET motorsport c32 pulley kit

will these also be able to be fitted with out modificatiion?

Im new to engine modding the c32 amg, so any help woul;d be appriciated!!

Thanxs!!

Apr 17, 2009 | 08:59 AM

hooleyboy

Former Vendor of MBWorld

Joined: Jan 2007

Posts: 3,193

Likes: 3

From: Glendale Arizona

C55,SL55,C63

I dont think you can go wrong with LET/Eurocharged. I've met Wayne and he is a good guy. I've also have been working with Jake on a Heat exchanger set up (I'm slacking I know). I have to say the LET/Eurocharged guys are always on the forum and are willing to helpout. Heck, IF you buy Wayne some Redbulls he might just come visit you.

cant say anything bad about C3P haven't used their stuff... I will say this. You can get a hold of LET/Eurocharged much faster. Customer service is king and they got it at LET/Eurocharged.

Apr 17, 2009 | 11:01 AM

H13BS M

Thread Starter

Junior Member

Joined: Jun 2008

Posts: 44

Likes: 0

From: Wokingham,Berkshire, England

2002 Mercedes Benz C32 AMG

mate your 55 is unreal!!the times your getting are sick!!

All the code 3 products are from lets website.I just want an ic pump, performance pulley and an heat exchanger, as after a custom remap, this should be a good little setup for my c32(i think...)

how much more(performance wise)do you think the difference will be with thsere products??

Thanxs!!

Apr 17, 2009 | 11:22 AM

MRAMG1

MBWorld Fanatic!

Joined: Jan 2007

Posts: 3,342

Likes: 11

From: PA

S600, GL450, GLC 43

Quote:

Originally Posted by H13BS M

Hi there, was just wondering what people thought of the following parts, and if they are staright fitment for the c32 amg (no modification needed)

Code 3 heat exchange3

LET motorsport c32 pulley kit

will these also be able to be fitted with out modificatiion?

Im new to engine modding the c32 amg, so any help woul;d be appriciated!!

Thanxs!!

Okay, the C3 HE requires a minor mod if you have the headlight washers, like I did. Pretty easy just need to rearange the lines.

I left the LET pulley up because it is MY prefered way of making boost. I feel that that the smaller SC pulley MAY cause excessive slipage, IMHO.

Don't forget the LET TUNE my friend. IT WILL wake the car up noticably

See yeah

Apr 17, 2009 | 11:32 AM

hooleyboy

Former Vendor of MBWorld

Joined: Jan 2007

Posts: 3,193

Likes: 3

From: Glendale Arizona

C55,SL55,C63

Quote:

Originally Posted by MRAMG1

See yeah

Kinda off topic:
A question I've been asking myself is. If the pulley was slipping wouldnt it just shred the belt?

Apr 17, 2009 | 11:34 AM

JG26_Irish

Senior Member

Joined: Nov 2005

Posts: 396

Likes: 3

From: Morehead, KY USA

SLK55 AMG, E320 BlueTec, ML350, (formerly) C32 AMG, MR2 Turbo, HD-FLH-FSE, BMW R100RS, Ducati M900

Mods

I have the C3P pulley and the C3P intake. Each takes about 15-20 min to install. Straight bolt-on. Combined, you should see about a 30-40hp boost in output at the rear wheels. I have not dyno'ed mine but it dropped the 0-60 times by about 3-4 tenths but made getting a good launch harder due to loads of wheelspin, lol. I hope to get back to the track soon. Bone stock I trapped a 1/4 mi ET of 13.54 sec @103 mph. That is average at best. Based on seat of pants and timeing of 0-60 and 0-100mph time (just over 12 sec now) I am expecting my 1/4 mi ET on a good DA day to be in the low low 13's. I am told that with the addition of only the LET tune (next on my list) I can expect 12.90's in the 1/4. I do not yet have the johnson pump either but plan to add it soon.

Knocking 5 tenths off with only a handfull of bolton mods makes the C32 a fun little beast.

Irish

Apr 17, 2009 | 12:33 PM

MRAMG1

MBWorld Fanatic!

Joined: Jan 2007

Posts: 3,342

Likes: 11

From: PA

S600, GL450, GLC 43

Quote:

Originally Posted by hooleyboy

Kinda off topic:
A question I've been asking myself is. If the pulley was slipping wouldnt it just shred the belt?

No my friend it won't shred it unless it slips REALLY bad. First you will see fine black powder around the pulley itself, then everywhere in your engine bay. On my stang, with a whipple, the 10 pound pulley, aka small, would slip just a little. Giving into what I described above. The larger 8 pound pulley NEVER slipped. Belt life was about 10-12 k with the slippy 10 pounder.

Sorry for the OT insert

Now back to your reguarly scheduled show

See yeah

6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)

Verdad Gallardo

Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun

Verdad Gallardo

Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren

Verdad Gallardo

8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine

Verdad Gallardo

Flawlessly Restored Mercedes 190E Evo II Heads to Auction

Verdad Gallardo

Electric Mercedes C-Class Unveiled: 11 Things You Need to Know

Verdad Gallardo

Mercedes EQS Gets A Major Update: Everything You Need to Know

Verdad Gallardo

5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve

Verdad Gallardo

Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping

Verdad Gallardo

10 Most Reliable Mercedes-Benz Models You Can Buy Used

Verdad Gallardo

Apr 17, 2009 | 03:08 PM

Gramma_Benz

MBWorld Fanatic!

Joined: Jul 2007

Posts: 2,000

Likes: 20

From: East Bay, Bay Area

2002 C32, 2012 S550

Quote:

Originally Posted by H13BS M

Best power to cost ratio....LET/Eurocharged 185mm pulley. I used to have a Code3 pulley and while it was nice, I wanted more power. I know a few people who went the same route. So learn from our money spent. Go directly to the 185.