WTB:C32 AMG ENGINE
#1
Senior Member
Thread Starter
Join Date: Aug 2008
Location: Tracy///Fremont Bay Area , CA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
03 C32 AMG
WTB:C32 AMG ENGINE
Im looking for an working c32 engine if anyone has one or knows where i can purchase one please let me know thanks.
#3
Senior Member
Thread Starter
Join Date: Aug 2008
Location: Tracy///Fremont Bay Area , CA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
03 C32 AMG
My crank pulley came off while I was driving . Took it to my indy shop on monday and I just got a call saying its gona cost 3800 to fix. the woodruff key is way to damaged , the gotta take everything apart.
#5
Super Member
Can you elaborate on this issue with the crank pulley?
Had you replaced it or done anything to it?
Was it an OE pulley?
#6
Senior Member
Thread Starter
Join Date: Aug 2008
Location: Tracy///Fremont Bay Area , CA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
03 C32 AMG
185 mm crank pulley , I was driving a week back and the pulley unscrewed basically and came out . the pulley and the bolt. My car was running fine before this , I even had it dyno tuned and nothing happened.
#7
SPONSOR
Join Date: Jul 2007
Location: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Posts: 5,459
Received 149 Likes
on
109 Posts
Eurocharged Performance ML63 and TT lambo
Get a new engine. Cna be had for less then that price and swaps are easy.
Trending Topics
#9
MBWorld Fanatic!
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
2008 A8L, 2002 996TT X50, 2009 X5
EURO KNG - sorry to hear it, especially after your other pulley issue not long ago. Best of luck with getting it fixed.
#11
SPONSOR
Join Date: Jul 2007
Location: Houston/ Austin /Toronto / UAE / Minneapolis / Orlando /Cincinnati
Posts: 5,459
Received 149 Likes
on
109 Posts
Eurocharged Performance ML63 and TT lambo
When searching for the engine, look for the srt6 crossfire engine. For some reason the mercedes name adds to the cost. When we were looking for a spare for the twin project, they could be found for a conciderable amout less.
#12
#13
MBWorld Fanatic!
#15
Senior Member
Thread Starter
Join Date: Aug 2008
Location: Tracy///Fremont Bay Area , CA
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
03 C32 AMG
Hey guys ,
thanks for all the help , I went to the shop and just told them to start working on my car.
My car will be done next week.
thanks for all the help , I went to the shop and just told them to start working on my car.
My car will be done next week.
#16
With all this being said... i'm sure most know i'm going to be taking apart a lot of stuff in the next week. My car has an aftermarket pulley, would it be wise to take it off, and put a new bolt in? Just in case an old bolt was re-used?
#17
Super Member
if you don't trust the shop that did it, i would do it for a piece of mind.
#18
MBWorld Fanatic!
This is a scary thread to read... 185MM just falling off. Glad I opted to not drive my C32 at all until I get the slight pulley wobble sorted out. Sorry to hear this man! Maybe during install the key wasn't lined up?