WTB original SC pulley for 2003 C32

Apr 30, 2012 | 01:14 AM

mdavidian

Thread Starter

Junior Member

Joined: Mar 2012

Posts: 34

Likes: 0

2003 C32 AMG

WTB original SC pulley for 2003 C32

Was wondering if anyone had their original supercharger pulley laying around who got a performance pulley. I think mine may have been damaged by the machine shop when they pressed in a new bearing during a bearing change.

Apr 30, 2012 | 06:47 AM

lizardjack

Member

Joined: Sep 2007

Posts: 143

Likes: 1

From: RUSSIA

Shelby GT500

Could you please take a few pics of your pulley and post here so I could tell if there is anything wrong with it, before u buy another one?

Apr 30, 2012 | 11:00 AM

mdavidian

Thread Starter

Junior Member

Joined: Mar 2012

Posts: 34

Likes: 0

2003 C32 AMG

I will tonight when I can get it off again. I just learned something from another post. The bearing comes in from the front end of the pulley... Are there spacer washers between the bearing and where it seats in the pulley? I know there are spacers on the spline of the SC to get the pulley away from the SC, but I wonder if there were spacers that were inside the pulley that were lost.

May 1, 2012 | 12:43 AM

mdavidian

Thread Starter

Junior Member

Joined: Mar 2012

Posts: 34

Likes: 0

2003 C32 AMG

Here are some pics of the pulley off, with c clip removed. I tried to get the bearing out, but couldn't. I'll have to get a bearing puller or take it in to the shop.

Attached Thumbnails

WTB original SC pulley for 2003 C32-img_0816.jpg

WTB original SC pulley for 2003 C32-img_0815.jpg

WTB original SC pulley for 2003 C32-img_0813.jpg

WTB original SC pulley for 2003 C32-img_0812.jpg

WTB original SC pulley for 2003 C32-img_0811.jpg

WTB original SC pulley for 2003 C32-img_0810.jpg

May 1, 2012 | 06:17 PM

mdavidian

Thread Starter

Junior Member

Joined: Mar 2012

Posts: 34

Likes: 0

2003 C32 AMG

Problem solved. I took out the old bearing to show a friend and a small spacer washer fell out. Took it back to the machine shop and had him replace the bearing with the washer in. Fits perfectly. He thought it was part of the old bearing...