E55k Swap into C32.
#1
Junior Member
Thread Starter
E55k Swap into C32.
I really just need help with the ECU coding/VIN writing! Anyone who can source me ECU clearing/coding, I will pay!
I’ve done tons of research and I’m trying to get all of my ducks in a row before I buy an engine. I have a 2004 C32 AMG. Engine runs great. My wife was driving the car for 2 years, but I bought her a 2013 E350 4 Matic so now I’m driving the C32. I want more power. I’m a 14 year Master tech with Mercedes, but have no experience with “wiping” ME control units and Coding them. I’ve found a few members, Rudy Compart and SkaterJosh that have done this successfully, but can’t track anyone down. Who can point me in the right direction? I’m willing to pay anyone who can help me with the correct coding! I have most of the other issues figured out!
E55 Fuel pumps/senders
E55 wiring harness
Custom exhaust/headers
Do I need C55 oil pans?
Which driveshaft?
any help is greatly appreciated. Maybe once I get this figured out we can make my build thread a Sticky at the top of this page! Thanks!
I’ve done tons of research and I’m trying to get all of my ducks in a row before I buy an engine. I have a 2004 C32 AMG. Engine runs great. My wife was driving the car for 2 years, but I bought her a 2013 E350 4 Matic so now I’m driving the C32. I want more power. I’m a 14 year Master tech with Mercedes, but have no experience with “wiping” ME control units and Coding them. I’ve found a few members, Rudy Compart and SkaterJosh that have done this successfully, but can’t track anyone down. Who can point me in the right direction? I’m willing to pay anyone who can help me with the correct coding! I have most of the other issues figured out!
E55 Fuel pumps/senders
E55 wiring harness
Custom exhaust/headers
Do I need C55 oil pans?
Which driveshaft?
any help is greatly appreciated. Maybe once I get this figured out we can make my build thread a Sticky at the top of this page! Thanks!
Last edited by Stubbyfoil; 06-10-2020 at 08:39 AM.
#2
Super Member
I'm reasonably sure you need a C55 pan. I think it's different than the E55 one.
E55 headers fit on a C55. I am running Eurocharged E55 midders on my C55. Left side of the motor (if not facing it) is very close to the underbody and it rubs on tight right corners. Bit of Clarksoning and it was fine. I prefered that option over similarly priced shorties.
E55 headers fit on a C55. I am running Eurocharged E55 midders on my C55. Left side of the motor (if not facing it) is very close to the underbody and it rubs on tight right corners. Bit of Clarksoning and it was fine. I prefered that option over similarly priced shorties.
#4
Senior Member
The swap has been done several times, maybe you can find some useful information here:
https://mbworld.org/forums/c32-amg-c...e-kicking.html
https://mbworld.org/forums/c32-amg-c...e-kicking.html
#5
Junior Member
Thread Starter
I’ve read all of the threads several times. Fitting the engine, I’m not worried about. Im a 14year Benz tech. I can source e55k fuel senders and everything else needed.
what I need is Rudy Comparts contact information or someone else who can WIPE the ME Control Unit and write my VIN into it.
ECU coding is what I need figured out! So far I haven’t been able to speak to anyone! Please help!
what I need is Rudy Comparts contact information or someone else who can WIPE the ME Control Unit and write my VIN into it.
ECU coding is what I need figured out! So far I haven’t been able to speak to anyone! Please help!
#7
Junior Member
Thread Starter
I called them. They will not
Trending Topics
#8
MBWorld Fanatic!