Celeris AMG

Hello friends, after doing upgrades on my C32 to gain power, I noticed that my brakes were missing...
I have wanted to do this upgrade for a long time but the truth is that I did not find much complete information on everything that was needed to do this upgrade.

Thanks to a friend from my city who has another C32 also prepared with big brakes, I decided to do it.

I put the list of materials that are needed with their references:

Front calipers: For C63 (W205) or GT AMG (W190), reference A2054216798 and A2054216898

Front disc (FOR CLS): Brembo 360mm x 36mm , reference 09.B747.51

Front pads ( FOR C63): Brembo , reference P 50 154

Sensor for pads: reference A171 540 06 17

Brake fluid: reference A000 989 56 05 11 ,DOT4

Support/spring pads: A000 421 18 00

Calipers adapter with screws: Customized

HEL Braided Brake front and rear: (FOR C32 AMG): reference MER-4-164

I hope this information will serve more people.


Here are the adapters made to measure for the calipers.



When installing the caliper adapters, we had to cut the disc guard down a bit.



And finally, the result.




The change is surprising as well as the new touch with the pedal.
Simply necessary if you have more power.

If anyone is interested in these adapters for the C63 AMG calipers on their w203, contact me privately and I will give you all the information.

cm60k

Great job bro..

-;-ZAYED-;-

cdk4219

I would guess these need bigger wheels?

Celeris AMG

Now I have original C55 18" wheels installed, with “ believe “ offset 34 and 37.

They run free without spacers.

Celeris AMG

Gracias bro !! I've never changed brakes before, but it's really easy and you don't need any special tools, except for the brake fluid purger.
In 4 hours everything was changed.

PJmak

Would you mind proving more info on the caliper adapters to adapt the 360mm rotors?

Celeris AMG

The adapters for calipers are made by a friend ,in aluminum and painted anodized.

The 360mm discs do not require any adaptation, they fit perfectly.

I can get more adapters with 4x screws.

tensleep80

Good heavens, I thought the stock brakes on mine were big. There's some dinero sitting on that bench! Nice work.

capo_vendetta

Hi,

ET 30 - 34 (front - back) for the c55 wheels.
ET 37 - 30 (front - back) for the clk 55 wheels.

I have the same upgrade but i used the 6 pot pistons of the slk 55 amg. Installation is the same but i think the bracket is an OEM part.

Great work !

Celeris AMG

Thanks!!!

Have rims with et37 front (a little snug, but not rub ) and et34 rear.

The end result, all homemade.




The rear also had their Miami blue touch 😂

capo_vendetta

Nice !

If you put ET 30 in the front, you can go lower with your suspension.

Celeris AMG

Dear Capo, if I lower the offset=et , the wheels come out more.
Better for the calipers, but worse for the wheels since they can rub more.
With this configuration there is no friction anywhere.

massivelegogabe

Celeris
How can I contact you? I'm very interested and would like to know more.

Frost36

Awesome brake setup, looks clean!

Celeris AMG

send me a private, and we talk

WaveyKat

you can use the CLK63 Front and Rear BBK and you wont need to make an adaptor.

CLK63 030 AMG BRAKES KIT
003-420-67-83 (Caliper) Front
003-420-68-83 (Caliper) Front
004-420-50-20 (Brake Shoe) Front
209-421-01-12 (Brake Disc) x2 Front 360mm
003-420-29-83 (Caliper) Rear
003-420-30-83 (Caliper) Rear
004-420-49-20 (Brake Pad) Rear
171-423-02-12 (Brake Disc) x2 Rear 330mm
171-540-06-17 Front Brake Sensor
211-540-17-17 Rear Brake Sensor
see post #30 & #41
https://mbworld.org/forums/c32-amg-c...alipers-2.html

cm60k

Great write-up, Thanks for sharing..

(-;-ZAYED-;-)

CGAMG

Does your friend still make the brackets?

cm60k

Those nice front "W205 C63" calipers made by an excellent Japanese brand named "Akebono",

they had contracted with MB from "Aug/2014" to "Oct/2018"..

(-;-ZAYED-;-)