Air intake pipe for a c36
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Hamilton, ON
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
1997 C36 AMG
Air intake pipe for a c36
Any ideas where you can find an original or reproduction crossover pipe for a c36? The one with the 3.6 on it?
#2
MBWorld Fanatic!
#4
MBWorld Fanatic!
#5
MBWorld Fanatic!
Join Date: Feb 2007
Location: Connecticut, New Haven
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
95' AMG SeeThreeSix
Hmm I might know someone who is working on reproduction crossovers.....won't be till the summer though need to finish up the molds I have started now. Stealer, ebay, or a lucky nab on the forums is the best bet. Not the kinda thing you'll see laying around the junkyard. Good Luck
#6
MBWorld Fanatic!
Hmm I might know someone who is working on reproduction crossovers.....won't be till the summer though need to finish up the molds I have started now. Stealer, ebay, or a lucky nab on the forums is the best bet. Not the kinda thing you'll see laying around the junkyard. Good Luck
What about the engine cover for the C43, do you think you could laminate that or would it not hold up with the heat?
Trending Topics
#8
MBWorld Fanatic!
#10
Super Member
Join Date: Dec 2009
Location: Chapel Hill, NC/Montreal, QC
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
1995 C36 AMG, 1998 C43 AMG
Ben this is a little bit directed toward you because you have a 95, but which intake pipe do you have? Anyone else with a 95 is welcome to share.
I thought i was unfairly stuck with the flat crossover pipe standard on the C280. The other day, i called my dealer and they told me they couldn't confirm it, but the computer wasnt saying that the fat, "36" pipe wasn't compatible with my car, and the flat one was. They said this was probably due to one of Mercedes' sneaky middle-of-the-model-year switch this part.
Do others with a 95 have the 36 one, or the flat one??
I thought i was unfairly stuck with the flat crossover pipe standard on the C280. The other day, i called my dealer and they told me they couldn't confirm it, but the computer wasnt saying that the fat, "36" pipe wasn't compatible with my car, and the flat one was. They said this was probably due to one of Mercedes' sneaky middle-of-the-model-year switch this part.
Do others with a 95 have the 36 one, or the flat one??
#11
MBWorld Fanatic!
Join Date: Feb 2007
Location: Connecticut, New Haven
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
95' AMG SeeThreeSix
Ben this is a little bit directed toward you because you have a 95, but which intake pipe do you have? Anyone else with a 95 is welcome to share.
I thought i was unfairly stuck with the flat crossover pipe standard on the C280. The other day, i called my dealer and they told me they couldn't confirm it, but the computer wasnt saying that the fat, "36" pipe wasn't compatible with my car, and the flat one was. They said this was probably due to one of Mercedes' sneaky middle-of-the-model-year switch this part.
Do others with a 95 have the 36 one, or the flat one??
I thought i was unfairly stuck with the flat crossover pipe standard on the C280. The other day, i called my dealer and they told me they couldn't confirm it, but the computer wasnt saying that the fat, "36" pipe wasn't compatible with my car, and the flat one was. They said this was probably due to one of Mercedes' sneaky middle-of-the-model-year switch this part.
Do others with a 95 have the 36 one, or the flat one??
What is the PN on your intake manifold?
#12
Super Member
Join Date: Dec 2009
Location: Chapel Hill, NC/Montreal, QC
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
1995 C36 AMG, 1998 C43 AMG
I will check on that later, I'm pretty sure it will physically fit, i think it just wasn't in their system for my vin/year. Also do you know where the pn. is on it? For now though, what month was yours made in? Also do you have the amber corners, or do you just like em?
Nice carbon fibre on the engine there too
Nice carbon fibre on the engine there too
Last edited by nd4spd13; 06-28-2010 at 06:22 PM.
#13
MBWorld Fanatic!
Join Date: Feb 2007
Location: Connecticut, New Haven
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
95' AMG SeeThreeSix
I will check on that later, I'm pretty sure it will physically fit, i think it just wasn't in their system for my vin/year. Also do you know where the pn. is on it? For now though, what month was yours made in? Also do you have the amber corners, or do you just like em?
Nice carbon fibre on the engine there too
Nice carbon fibre on the engine there too
Thanks for the kind words regarding the carbon fiber cover, I just finished the mold for them and will soon be vacuum bagging more fabric . Also, you may not have noticed that the engine emblem in the pic is cast aluminum. I made these as the plastic emblems tend to become brittle, flake and ultimatley self destruct over time.
#14
Super Member
Join Date: Dec 2009
Location: Chapel Hill, NC/Montreal, QC
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
1995 C36 AMG, 1998 C43 AMG
Yup, same part number. weird. There were other numbers under that too. Would those tell us anything? So yours has been on there since 95 huh. Odd. What month was yours manufactured in?
Cool. Yea I read the whole thread on that, and seeing as mine is totally gone, i will add that to my 'cart'. I'm still waiting to fork over a couple salaries to you for some cool cf parts :P
Cool. Yea I read the whole thread on that, and seeing as mine is totally gone, i will add that to my 'cart'. I'm still waiting to fork over a couple salaries to you for some cool cf parts :P