SLK55 Oil Cooler Installed
#3
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: A.D., U.A.E
Posts: 7,034
Likes: 0
Received 384 Likes
on
349 Posts
00 C200 & 00 C55 & 06 SLK55
This cooler has an additional air cooler with fan, i put it behind the Bumper(right side), sorry i didn’t picture it,, also im afraid if the original cooler
damaged or seals goes bad, it well mixing oil with water,, i don’t want to think about risky nightmares,, in the summer the temperature sometimes
reachs "51C".......
ZAYED,,
damaged or seals goes bad, it well mixing oil with water,, i don’t want to think about risky nightmares,, in the summer the temperature sometimes
reachs "51C".......
ZAYED,,
#4
shu habibi.
you're a colorfull guy, you like all kinds of boja.
did you get those parts new or used?
were there lots of stuff to modify to your engine to fit those coolers?
any improvement vs stock?
you're a colorfull guy, you like all kinds of boja.
did you get those parts new or used?
were there lots of stuff to modify to your engine to fit those coolers?
any improvement vs stock?
#5
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: A.D., U.A.E
Posts: 7,034
Likes: 0
Received 384 Likes
on
349 Posts
00 C200 & 00 C55 & 06 SLK55
Thankss,, yeah like colours,, gives a freshy feeling always...,
Those parts are new(see attach),,
No need any mods to put that cooler, it sets Exactly like the stock one, just need to cut the rubber hoses(that joint to the pipes), with little bit
twisting those pipes, it well fit perfectly,, and customizing bracket for the cooler(behind the bumper),, i didn’t comparing between them yet,
i well see & let you know.....
ZAYED,,
Those parts are new(see attach),,
No need any mods to put that cooler, it sets Exactly like the stock one, just need to cut the rubber hoses(that joint to the pipes), with little bit
twisting those pipes, it well fit perfectly,, and customizing bracket for the cooler(behind the bumper),, i didn’t comparing between them yet,
i well see & let you know.....
ZAYED,,
The following users liked this post:
eurochargedw210 (05-23-2022)
#6
Super Member
Join Date: Dec 2009
Location: Chapel Hill, NC/Montreal, QC
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
1995 C36 AMG, 1998 C43 AMG
So you're saying that this new oil cooler is an air-oil cooling type rather than the water/oil type we have stock? Or is there just a fan by the bumper to aid the cooling? Also how much for that upgrade?
Trending Topics
#8
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,696
Received 267 Likes
on
225 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
Nice and interseting upgrade for those who live in hot climates or those who like to "thrash" the daylights out of the vehicle on track or mountain roads
#10
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: A.D., U.A.E
Posts: 7,034
Likes: 0
Received 384 Likes
on
349 Posts
00 C200 & 00 C55 & 06 SLK55
I want to share the difference between SLK55 AMG Engine oil filter(which im using) & the all other M112s & M113s oil filter including the AMG models,,
1) SLK55 oil filter #: "000 180 28 09"
2) Other M112s & M113s including AMGs oil filter #: "000 180 26 09"
3) pics. together
*noticed that the SLK55 oil filter got only 4 o-rings, and shorter than the one from all M112s & M113s, [don’t know the reason]...!?!?
ZAYED,,
1) SLK55 oil filter #: "000 180 28 09"
2) Other M112s & M113s including AMGs oil filter #: "000 180 26 09"
3) pics. together
*noticed that the SLK55 oil filter got only 4 o-rings, and shorter than the one from all M112s & M113s, [don’t know the reason]...!?!?
ZAYED,,
Last edited by cm60k; 09-14-2013 at 06:33 PM.
#12
Put the SLK55 oil cooler yesterday,, Instead of the water helper,,
Thank GOD, set perfectly.....
Attachment 244814Attachment 244815Attachment 244816
ZAYED,,
Thank GOD, set perfectly.....
Attachment 244814Attachment 244815Attachment 244816
ZAYED,,
are you using Magnecore KV85 sparkplug wires?
are you happy with them?
did they ever pop off from the plugs or ignition coils?
have you noticed any improvements from Magnecore wires vs stock MB wires?
#13
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,696
Received 267 Likes
on
225 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
I have them since over a year now. No problems ever and I have never seen a sparkplug cap pop out.
The difference between stock and these, it is difficult to say and remain objective minded, but they certainly look better with a bit of red color...
Also, if you need to pull a plug it is easier as you don't need to use the 17mm open spanner method to remove the cap
The difference between stock and these, it is difficult to say and remain objective minded, but they certainly look better with a bit of red color...
Also, if you need to pull a plug it is easier as you don't need to use the 17mm open spanner method to remove the cap
#14
i noticed the Mag wires in Zayed's pictures.
all kinds of feedback from many peepol is necessary before purchase.
Mag wires handles a lot of heat and possibly cheaper to buy than factory wires.
other than that I don't know if they are an improvement vs factory wires?
all kinds of feedback from many peepol is necessary before purchase.
Mag wires handles a lot of heat and possibly cheaper to buy than factory wires.
other than that I don't know if they are an improvement vs factory wires?
#16
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: A.D., U.A.E
Posts: 7,034
Likes: 0
Received 384 Likes
on
349 Posts
00 C200 & 00 C55 & 06 SLK55
Feedback is soo important, specially with aftermarket wires,,
i have a bad experts with an Evosport wires, i put some pics. here:
https://mbworld.org/forums/c36-amg-c...-set-need.html
that’s why i been careful before purchased Mag wires,,
don’t worry; Mag wires are great wires, you can go with them confidently.....
ZAYED,,
Last edited by cm60k; 09-16-2013 at 11:12 AM.
#19
Member
Hi Zayed
I need part numbers of the oil cooler and lines..
I need part numbers of the oil cooler and lines..
Last edited by slobo; 03-07-2016 at 07:14 PM.
#20
Member
#22
Member
Filter housing is the same with all M112/M113, but the cooler core is differ than all N/A M112/M113,,
that's why should to get the cooler core to put the External line in it..!
[see attached]
Attachment 326497
Attachment 326498
Attachment 326499
ZAYED,,
that's why should to get the cooler core to put the External line in it..!
[see attached]
Attachment 326497
Attachment 326498
Attachment 326499
ZAYED,,
Tell me the last thing.. about the cooling in and out... how did you close these two? Or do you connect these two simply with a hose?
The following users liked this post:
slobo (03-08-2016)
#24
Member
Yes, exactly these two ports (blue) look at my picture.
Is this for the coolant of the OEM oil cooler? What I have to do with these two ports?
Is this for the coolant of the OEM oil cooler? What I have to do with these two ports?
Last edited by slobo; 03-08-2016 at 06:48 AM.