Intake Hoses/Snorkels for C43????
#1
Thread Starter
Member
Intake Hoses/Snorkels for C43????
I ordered these off Pelican Parts and then I received an email stating they are no longer available.
I am wondering if anyone out there has these laying around and if you want to sell them? I bought this car and they were missing and I'm trying to return it back to it's original condition!
Here are the part numbers.
intake hoses: 1130940482 (left) 1130940382 (right)
Here is a picture I found on one of the threads.
Thanks very much.
I am wondering if anyone out there has these laying around and if you want to sell them? I bought this car and they were missing and I'm trying to return it back to it's original condition!
Here are the part numbers.
intake hoses: 1130940482 (left) 1130940382 (right)
Here is a picture I found on one of the threads.
Thanks very much.
#3
Thread Starter
Member
I was missing the front door speaker covers, fog lights, and those snorkels.
The car actually came with these aftermarket intakes that feed into the engine cover, but then stop before the grill and have two k&N air filters on each side. Kinda weird. I'll send a pic when I get home.
#4
Thread Starter
Member
ACtually I just called the local dealership here in calgary, Canada and they have them but have to order them from Germany. All good.
#5
Let us know if they can actually order those from Germany. Because I was looking for some a year ago and I was told they could be ordered but three days later they told me Germany said they are no longer available.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
#6
Thread Starter
Member
When I bought the car this is what it came with. It kind of defeats the purpose of the factory cold air intake that connect through the back of the grill. If anyone can make sense of these please feel free. Otherwise I have no idea the purpose of these considering there are actual air filters (2)
#7
They should have removed the filters in the air box after installing the after market ones. The after market ones you have there make power but once the engine compartment gets hot you will loose it as it will pull in hot air. It's really a simple fix, buy the oem and install, done. Toss the after market ones away or give them to someone if their in good shape.
I played around with many setups to get the most HP. Those open air filters inside the engine are not good.
I played around with many setups to get the most HP. Those open air filters inside the engine are not good.
Trending Topics
#8
Thread Starter
Member
Let us know if they can actually order those from Germany. Because I was looking for some a year ago and I was told they could be ordered but three days later they told me Germany said they are no longer available.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
thanks
#9
Thread Starter
Member
They should have removed the filters in the air box after installing the after market ones. The after market ones you have there make power but once the engine compartment gets hot you will loose it as it will pull in hot air. It's really a simple fix, buy the oem and install, done. Toss the after market ones away or give them to someone if their in good shape.
I played around with many setups to get the most HP. Those open air filters inside the engine are not good.
I played around with many setups to get the most HP. Those open air filters inside the engine are not good.
dumb qusation but how do I check to see if the stock filters were removed? Obviously I'll purchase them and I'll need gem when I get the stock snorkels in from mercedes
#10
You have to remove the whole box from the engine. Than flip it backwards and you will see the screws to remove the back covers. There you will see them if they did not remove them. Also, can you take a picture after you remove the front cover? That's the one that says AMG on it. Just pull it up from the front and than the back. I'm curious to see if the last owner CUT the oem tubes to install the after market filters. Getting tubes to fit the air box not that easy because the inlet is not round but oval like I guess the shape of an egg sort off.
#11
MBWorld Fanatic!
i might be interested in buying your set up, i'd like to see what is under the cover as well. you may need a new box if P/O cut through to fit the piping. i definitely have an extra box we can work out as well if needed.
edit:
also, btw the SRI you have is not the worst thing in the world. w202C43 does not have a great intake so looks like P/O was trying to make it better. i believe with the SRI from a dead stop it does lose efficiency because of the heat that can build up during a stop, but once you get going say about 15-20 mph, you get fresh air that travels into the engine compartment and efficiency is gained. i am a bit uncomfortable with the set up only because i would rather see the filters just a little lower towards the front.
also if those are K&N filters, they are probably treated with oil which usually does a number on the MAF (an expensive part, but easy repair). the non-oil cone filters are around 50-60 a pop.
is that piping aluminum or rubber?
edit:
also, btw the SRI you have is not the worst thing in the world. w202C43 does not have a great intake so looks like P/O was trying to make it better. i believe with the SRI from a dead stop it does lose efficiency because of the heat that can build up during a stop, but once you get going say about 15-20 mph, you get fresh air that travels into the engine compartment and efficiency is gained. i am a bit uncomfortable with the set up only because i would rather see the filters just a little lower towards the front.
also if those are K&N filters, they are probably treated with oil which usually does a number on the MAF (an expensive part, but easy repair). the non-oil cone filters are around 50-60 a pop.
is that piping aluminum or rubber?
Last edited by mickey13; 01-08-2017 at 06:22 AM.
#12
Thread Starter
Member
i might be interested in buying your set up, i'd like to see what is under the cover as well. you may need a new box if P/O cut through to fit the piping. i definitely have an extra box we can work out as well if needed.
edit:
also, btw the SRI you have is not the worst thing in the world. w202C43 does not have a great intake so looks like P/O was trying to make it better. i believe with the SRI from a dead stop it does lose efficiency because of the heat that can build up during a stop, but once you get going say about 15-20 mph, you get fresh air that travels into the engine compartment and efficiency is gained. i am a bit uncomfortable with the set up only because i would rather see the filters just a little lower towards the front.
also if those are K&N filters, they are probably treated with oil which usually does a number on the MAF (an expensive part, but easy repair). the non-oil cone filters are around 50-60 a pop.
is that piping aluminum or rubber?
edit:
also, btw the SRI you have is not the worst thing in the world. w202C43 does not have a great intake so looks like P/O was trying to make it better. i believe with the SRI from a dead stop it does lose efficiency because of the heat that can build up during a stop, but once you get going say about 15-20 mph, you get fresh air that travels into the engine compartment and efficiency is gained. i am a bit uncomfortable with the set up only because i would rather see the filters just a little lower towards the front.
also if those are K&N filters, they are probably treated with oil which usually does a number on the MAF (an expensive part, but easy repair). the non-oil cone filters are around 50-60 a pop.
is that piping aluminum or rubber?
They are a hard hard rubber but def not aluminum.
#13
The air air box is so low at the mass air flow that the engine does not breath as it should/could. Need wings company and renntech has nice ones that will give performance and efficiency, and my speed43 air box will too. But again, if you just want oem looks than your set with installing the stock tubes. Want more performance get a better setup from whoever.
#14
MBWorld Fanatic!
yeah and just for the record. i think speed43 has a great fix for the intake. renntech was charging something like $2500 or $1500 for a similar product and it definitely retains an OEM look which the renntech didnt. you'd be hard pressed for the price to find something equal.
speed maybe you should post a few pictures installed to give him an idea, he might have not searched the forum on your boxes
speed maybe you should post a few pictures installed to give him an idea, he might have not searched the forum on your boxes
#15
Before and after pics and reviews below. Don't pay attention to the price...
https://mbworld.org/forums/c36-amg-c...dy-orders.html
https://mbworld.org/forums/c36-amg-c...dy-orders.html
Last edited by speed43; 01-08-2017 at 10:15 PM.
#16
Thread Starter
Member
Let us know if they can actually order those from Germany. Because I was looking for some a year ago and I was told they could be ordered but three days later they told me Germany said they are no longer available.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
If thats the case for you i have a set I can sell you. I also have my modded air box for sale. Makes more hp and torque than stock. But looks stock just like oem.
Anyway still looking for some sort of a fix. I'd be willing to trade these plus money or just buy the stock ones off somebody here if they are available?
Please let me know guys. Also Speed43, what do you have available? do you have pics?
#18
It looks like you were right. I just got a call from the mercedes dealership and all they continued making the right side for some reason but still manufacture the left.
Anyway still looking for some sort of a fix. I'd be willing to trade these plus money or just buy the stock ones off somebody here if they are available?
Please let me know guys. Also Speed43, what do you have available? do you have pics?
Anyway still looking for some sort of a fix. I'd be willing to trade these plus money or just buy the stock ones off somebody here if they are available?
Please let me know guys. Also Speed43, what do you have available? do you have pics?
Here's what I can offer you.
Custom modded air box good for proven 10Hp and 10 pounds of torque.
Engine cover, that the cover that's up in front of the engine.
Left and right air intake tubes, what you're missing.
Modded maf elbow for better air flow, engine breaths much better just like the modded air box. Goes really well with the air box.
And I will paint match (Matt black) the whole package so all the parts will look brand new. Your engine compartment will look very nice and OEM looking, yet your car will run so much better.
$450.00 for the whole package but you have to pay shipping. I will need your address to find out the price. Few months ago the air box by itself would have costed you the $450.00 so you're getting a nice deal.
Just email me if you're interested, I take PayPal for payments.
#20
Thread Starter
Member
#21
Thread Starter
Member
#22
Sir, you've been served the link
It's on the first page on ebay for Mercedes C43 amg
Being lazy is good
http://www.ebay.com/itm/MERCEDES-C43...JXyJZj&vxp=mtr
It's on the first page on ebay for Mercedes C43 amg
Being lazy is good
http://www.ebay.com/itm/MERCEDES-C43...JXyJZj&vxp=mtr
Last edited by KJI3jflarryfe93; 01-12-2017 at 12:34 PM.
#23
Thread Starter
Member
Sir, you've been served the link
It's on the first page on ebay for Mercedes C43 amg
Being lazy is good
http://www.ebay.com/itm/MERCEDES-C43...JXyJZj&vxp=mtr
It's on the first page on ebay for Mercedes C43 amg
Being lazy is good
http://www.ebay.com/itm/MERCEDES-C43...JXyJZj&vxp=mtr
thanks very much.
#24
Super Member
Originally Posted by peppyhead
Okay this looks pretty good.
How hard is it to install?
How hard is it to install?
#25
Thread Starter
Member
And do you sell the intake pipes seperatly as you mentioned in a post couple of days ago?
I am trying to get the car back to it's former glory and want to really see how it runs as I've only driven it once. I mentinoed when I first joined I got the car for $2800, which is a steal.
I still am interested I just want to see if you have the pipes to sell seperalty.