MAF and MAP sensor VOLTAGE
08-23-2018, 11:06 PM
#1
Senior Member
Thread Starter
MAF and MAP sensor VOLTAGE
Does anyone have or can provide a log of the voltage that these sensors put out on your N/A 43 or 55 ME2.0 cars. I would truly appreciate it, I am having a hell of a time tackling my swap and I am focused in on these 4 signals to tune the car, TPS % , MAF , MAP AND O2 SIGNAL voltages. I believe a AEM F/IC 8 piggyback is the only answer, I already have one but before i can even tune or start building the files I need to see what the ECU wants to see in ideal conditions. Currently the car with out the supercharger belt is a dog and I don't believe the data I will build will be proper reference point. I am located in MD
08-24-2018, 01:37 PM
#2
MBWorld Fanatic!
Does anyone have or can provide a log of the voltage that these sensors put out on your N/A 43 or 55 ME2.0 cars. I would truly appreciate it, I am having a hell of a time tackling my swap and I am focused in on these 4 signals to tune the car, TPS % , MAF , MAP AND O2 SIGNAL voltages. I believe a AEM F/IC 8 piggyback is the only answer, I already have one but before i can even tune or start building the files I need to see what the ECU wants to see in ideal conditions. Currently the car with out the supercharger belt is a dog and I don't believe the data I will build will be proper reference point. I am located in MD
above my paygrade. would seriously consider contacting someone with a bit of experience when it comes to something like this but thats probably because im simple minded,,, 2+2=4 type mind - dont ask me to multiply or i might cry. what swap did you do?
08-24-2018, 02:26 PM
#5
MBWorld Fanatic!
08-26-2018, 12:00 PM
#6
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,647
Received 251 Likes
on
212 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
Have you tried posting perhaps on this page: https://mbworld.org/forums/audio-electronics-38/
08-26-2018, 12:11 PM
#7
Senior Member
Thread Starter
I’m looking for the outputs of Mass Air Flow sensor and the Mass Air Pressure (MAP) sensor under wide open throttle at different RPM. You can use torque pro , or a few different odb scanners. I will send one to someone if they are willing to help.
Trending Topics
09-01-2018, 09:55 AM
#9
MBWorld Fanatic!
I know this isn't the greatest help but I'll be back in Portland in the beginning of November. If you still need help to get the outputs then I'll hook up my C43 and get them for you
