Fitment problem of Euroteck
#1
Member
Thread Starter
Join Date: Apr 2008
Location: Hong Kong
Posts: 79
Likes: 0
Received 1 Like
on
1 Post
C63 BS & Speciale
![Unhappy](https://mbworld.org/forums/images/icons/icon9.gif)
After receiving the Euroteck C63 rear carbon diffuser, my garage found that after fitting on left/right side, the middle part is not curved enough to clip in. We have tried it for 2 days, still no luck.
Then Neal(Euroteck) said that i'm joking with him.He just keep saying that my garage is not reading the installation notes and don't know how to install it.My garage have installed many other brand rear carbon diffuser for C63,they know their stuff.
i can accept i'm so unlucky to receive a fault product,but Neal can't accept they produce a fault one during the mass production.
May be i'm an idiot willing to spend money to make joke and ruin others reputation!
Really not my day !
Then Neal(Euroteck) said that i'm joking with him.He just keep saying that my garage is not reading the installation notes and don't know how to install it.My garage have installed many other brand rear carbon diffuser for C63,they know their stuff.
i can accept i'm so unlucky to receive a fault product,but Neal can't accept they produce a fault one during the mass production.
May be i'm an idiot willing to spend money to make joke and ruin others reputation!
Really not my day !
#2
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
After receiving the Euroteck C63 rear carbon diffuser, my garage found that after fitting on left/right side, the middle part is not curved enough to clip in. We have tried it for 2 days, still no luck.
Then Neal(Euroteck) said that i'm joking with him.He just keep saying that my garage is not reading the installation notes and don't know how to install it.My garage have installed many other brand rear carbon diffuser for C63,they know their stuff.
i can accept i'm so unlucky to receive a fault product,but Neal can't accept they produce a fault one during the mass production.
May be i'm an idiot willing to spend money to make joke and ruin others reputation!
Really not my day !
Then Neal(Euroteck) said that i'm joking with him.He just keep saying that my garage is not reading the installation notes and don't know how to install it.My garage have installed many other brand rear carbon diffuser for C63,they know their stuff.
i can accept i'm so unlucky to receive a fault product,but Neal can't accept they produce a fault one during the mass production.
May be i'm an idiot willing to spend money to make joke and ruin others reputation!
Really not my day !
#7
Former Vendor of MBWorld
Ummm....this threads is quite ridiculous! He showed me pictures of the diffuser being held up to the car saying it does not fit when he didn't even try clipping it on any side! Its like not trying on shoes but saying they don't fit!
The best thing of all is we know all these diffusers fit because we test fit them before we ship on a bumper we have here to break off unnecessary clips since those are put on after and most are not needed. I personally test fit his, so him saying it does not fit makes no sense and only shows the installer is not trying. All he does is need to bring it to a different shop or do it himself, it takes maybe 5 minutes. I also would be more then happy to explain it on the phone to the installer. It's quite amazing how someone can say something doesn't fit when I personally fit it and they are ALL the same, they come outta the same mold! One guy not knowing how to install something and trys to ruin a good reputation.....tsk tsk! I'll never understood why anyone would do that. But I would love to fly there and clip that diffuser on in 2 minutes for them!![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Also, please DO NOT believe everything you read!!!!!!! I NEVER DENIED THIS GUY A REFUND!!!!!!! He is saying his part is bad and all he needs to do is have it installed correctly. Lots of places do not know how to install parts and you need to go someone where. This person is jumping the gun pretty fast! All he needs to do is have his installer contact me and we will walk him threw it! but somehow this person looks like he has other things on his agenda.
The best thing of all is we know all these diffusers fit because we test fit them before we ship on a bumper we have here to break off unnecessary clips since those are put on after and most are not needed. I personally test fit his, so him saying it does not fit makes no sense and only shows the installer is not trying. All he does is need to bring it to a different shop or do it himself, it takes maybe 5 minutes. I also would be more then happy to explain it on the phone to the installer. It's quite amazing how someone can say something doesn't fit when I personally fit it and they are ALL the same, they come outta the same mold! One guy not knowing how to install something and trys to ruin a good reputation.....tsk tsk! I'll never understood why anyone would do that. But I would love to fly there and clip that diffuser on in 2 minutes for them!
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Also, please DO NOT believe everything you read!!!!!!! I NEVER DENIED THIS GUY A REFUND!!!!!!! He is saying his part is bad and all he needs to do is have it installed correctly. Lots of places do not know how to install parts and you need to go someone where. This person is jumping the gun pretty fast! All he needs to do is have his installer contact me and we will walk him threw it! but somehow this person looks like he has other things on his agenda.
Trending Topics
#8
Former Vendor of MBWorld
Unlike our's. We will not sell a part that does not fit right. We would not be able to sell so many or sell to so many MB dealers if we had a bad reputation for fitment. Errors are usually in the hands of a installer/user error. Parts from a good mould do not change their minds to fit or not fit...
#11
MBWorld Fanatic!
Join Date: Nov 2006
Location: California, USA
Posts: 9,137
Likes: 0
Received 4 Likes
on
4 Posts
E63 P30, CL500 Sport
Hmmm...... I've bought multiple EuroTeck products in the past for different cars, and fitment has always been A+...... Neal usually take extra care when ensuring fitment. I'm not saying you're lying or anything, but have you tried having your installer talk to Neal? Or maybe even tried a different installer?
#13
Former Vendor of MBWorld
Yes, we would. We would not have our reputation we have if we didn't take care of customers. However, there is no such thing as a diffuser that does not fit from us, they are all the same, and best of all they are all test fit on bumper before shipping to take off clips that are not needed. His diffuser was test fit by me personally. He is in Hong Kong, and I always make sure things that ship overseas are right. The install can be tricky if you never did it, or it can take 5 minutes if you have done it. All the customer needs to do is have his installer contact us and we will walk them threw it.
#14
One problem install is one thing, two is a indication of a possible production problem.
My 2 cents.
#15
MBWorld Fanatic!
Hmmmmmm........I've bought diffuser from Neal in the past. Neal were very willing to exchange, refund, give discount when I brought up one concern about the clear coat. After reading this thread, I find it very hard to believe that Neal wasn't willing to do what you want. All Neal want is you try another shop because not all shop can do installation on everything.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#16
MBWorld Fanatic!
Join Date: Oct 2008
Location: Central Florida
Posts: 1,521
Likes: 0
Received 3 Likes
on
3 Posts
2013 Chevy 427 Torch Red
The gap is barely noticable and I was willing to live with it quite frankly. There are pics of my car on various threads and you can not see the issue. All that said, I have been told that the center clips are deleted from newer versions and if I snap them off it will sit flush.
Works for me.
Works for me.
#17
Former Vendor of MBWorld
The W204 diffusers both for the regular c-class and c63 can be tricky to fit. This is because they clip in, unlike the other cars where they just stick on. Being that the stock part is plastic and flexes very easy, it is easy to bend and put where you want it. When you have a carbon part such as ours, its very hard to flex, yet it is still made to flex to fit on there. Every part is the same, it is not possible to have one different then the next. At first they were even hard to me to install, then after doing so many I got a great way of doing it that is very easy and fast. A lot of installers or individuals are worried they will crack it when they flex it, and they wont as long s they are careful, if you do not try flexing it, it will not go on. Its that simple. I hear from some people who say they thought they were going to break it when they put it on. Then i hear some people saying it doesn't fit, then I tell them what to do over the phone and they say i never knew it could do that... In this case, just call me or have your installer call me and ask how to fit it, rather then saying "it does not fit".
Here are pics of some on C63s, they are all the same!!! everyone fits the same if installed correctly.
![](http://img510.imageshack.us/img510/3866/46715448.jpg)
![](http://img3.imageshack.us/img3/4667/19317557.jpg)
![](http://img3.imageshack.us/img3/4055/29819981.jpg)
![](http://img39.imageshack.us/img39/610/636r.jpg)
Here are pics of some on C63s, they are all the same!!! everyone fits the same if installed correctly.
![](http://img510.imageshack.us/img510/3866/46715448.jpg)
![](http://img3.imageshack.us/img3/4667/19317557.jpg)
![](http://img3.imageshack.us/img3/4055/29819981.jpg)
![](http://img39.imageshack.us/img39/610/636r.jpg)
![](https://mbworld.org/forums/attachments/c63-amg-w204/158372d1243912796-euroteck-lip-diffuser-shots-white-led-night-shots-dsc01204.jpg)
#19
Senior Member
Join Date: Mar 2009
Location: Gilroy
Posts: 341
Likes: 0
Received 2 Likes
on
1 Post
GLK Matte Silver|MB Arts strut tower brace|MB Arts rear brace|Shaved door and bumper trim|K&N's|
Thank you BlackC230Coupe for clearing everything up! My apologies for jumping the gun on making a comment, I should have thought a little more and asked R8lai to post pics of his problem. I also should have paid more attention to his post count, could be one of your competitors for all I know.
#20
Former Vendor of MBWorld
Thank you BlackC230Coupe for clearing everything up! My apologies for jumping the gun on making a comment, I should have thought a little more and asked R8lai to post pics of his problem. I also should have paid more attention to his post count, could be one of your competitors for all I know.
#22
MBWorld Fanatic!
Lol.........I'm one of those people because it was my first time install it. I didn't want to bent it because I'm worry that it might break. After listened to your instruction, everything is still fine to these days. No sign of any crack even in the hot summer 100+ degree !!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#23
MBWorld Fanatic!
Join Date: Dec 2007
Location: Miami, FL
Posts: 1,237
Likes: 0
Received 1 Like
on
1 Post
C63 AMG(sold), 2009 CL550, 2010 S550 Majestic Black, 2010 ML550, 2006 C230, 2009 Venza
The diffuser is hot, it is kinda tricky to install since i saw Neal himself install it on my car. Just find another shop to do it for you!
#25
Former Vendor of MBWorld
Lol.........I'm one of those people because it was my first time install it. I didn't want to bent it because I'm worry that it might break. After listened to your instruction, everything is still fine to these days. No sign of any crack even in the hot summer 100+ degree !!![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)