C63 AMG (W204) 2008 - 2015

HOLES BE GONE!!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-14-2009, 07:45 PM
  #1  
Member
Thread Starter
 
desmo996's Avatar
 
Join Date: Jul 2009
Location: Las Vegas
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
BMW 335i, Ducati 996, Mercedes C63 AMG
HOLES BE GONE!!!

Had the 4 nasty license plate holes in my front bumper repaired by the dealer today and the results are truly unbelievable! My car is brand new and the bumper now looks factory new as well. There isn't even the slightest clue that there were ever holes to begin with. The paint is flawless! I have absolutely no idea how they managed to do this without repainting the entire bumper. The guys they use are nothing short of amazing craftsmen (they apparently do all the dealerships in town when it comes to this kind of work).

Before and after pic below. The after pic was taken with my phone under low light conditions so it looks dull. I'll post a more accurate photo when I get home. The car sparkles once again

$300 for the job (less than local PDR was asking), dropped off and picked up the same day. Couldn't be happier with these results.
Attached Thumbnails HOLES BE GONE!!!-photo.jpg   HOLES BE GONE!!!-photo-5.jpg  

Last edited by desmo996; 08-14-2009 at 07:54 PM.
Old 08-14-2009, 07:52 PM
  #2  
Senior Member
 
moparrbust's Avatar
 
Join Date: Sep 2008
Location: Las Vegas
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
2005 Crossfire SRT-6
Where's the after pics?
Old 08-14-2009, 08:09 PM
  #3  
MBWorld Fanatic!
 
tanktube67's Avatar
 
Join Date: Nov 2007
Location: SFV CA
Posts: 4,433
Likes: 0
Received 5 Likes on 5 Posts
2008 Black Out C350 Saks Edition / 87 VW GTI
Originally Posted by moparrbust
Where's the after pics?
take a look at both pictures
Old 08-14-2009, 08:11 PM
  #4  
MBWorld Fanatic!
 
Sincity's Avatar
 
Join Date: Feb 2003
Location: Vegas and Vancouver, BC
Posts: 5,974
Received 16 Likes on 14 Posts
.
Looks good.
Old 08-14-2009, 08:11 PM
  #5  
MBWorld Fanatic!
 
Sincity's Avatar
 
Join Date: Feb 2003
Location: Vegas and Vancouver, BC
Posts: 5,974
Received 16 Likes on 14 Posts
.
Originally Posted by tanktube67
take a look at both pictures
Perhaps he is being sarcastic?
Old 08-14-2009, 08:12 PM
  #6  
MBWorld Fanatic!
 
tanktube67's Avatar
 
Join Date: Nov 2007
Location: SFV CA
Posts: 4,433
Likes: 0
Received 5 Likes on 5 Posts
2008 Black Out C350 Saks Edition / 87 VW GTI
Originally Posted by desmo996
Had the 4 nasty license plate holes in my front bumper repaired by the dealer today and the results are truly unbelievable! My car is brand new and the bumper now looks factory new as well. There isn't even the slightest clue that there were ever holes to begin with. The paint is flawless! I have absolutely no idea how they managed to do this without repainting the entire bumper. The guys they use are nothing short of amazing craftsmen (they apparently do all the dealerships in town when it comes to this kind of work).

Before and after pic below. The after pic was taken with my phone under low light conditions so it looks dull. I'll post a more accurate photo when I get home. The car sparkles once again

$300 for the job (less than local PDR was asking), dropped off and picked up the same day. Couldn't be happier with these results.
Looks real good I envy you.
Old 08-14-2009, 08:12 PM
  #7  
Senior Member
 
moparrbust's Avatar
 
Join Date: Sep 2008
Location: Las Vegas
Posts: 446
Likes: 0
Received 0 Likes on 0 Posts
2005 Crossfire SRT-6
Originally Posted by tanktube67
take a look at both pictures


Ok, the second pic wasn't showing up when I first looked...........no sarcasm. lol
Old 08-14-2009, 08:26 PM
  #8  
MBWorld Fanatic!
 
tanktube67's Avatar
 
Join Date: Nov 2007
Location: SFV CA
Posts: 4,433
Likes: 0
Received 5 Likes on 5 Posts
2008 Black Out C350 Saks Edition / 87 VW GTI
Originally Posted by moparrbust
Ok, the second pic wasn't showing up when I first looked...........no sarcasm. lol
Old 08-14-2009, 08:39 PM
  #9  
Member
 
EuroB6's Avatar
 
Join Date: May 2008
Location: NJ
Posts: 199
Likes: 0
Received 0 Likes on 0 Posts
C63 AMG / B8 A4
wow and they didnt spray the entire bumper, that is really good work!
Old 08-14-2009, 08:47 PM
  #10  
MBWorld Fanatic!
 
sflgator's Avatar
 
Join Date: Jul 2009
Location: FL
Posts: 1,103
Likes: 0
Received 0 Likes on 0 Posts
'09 C63 AMG
Nice!!!! Now you see 'em and now you don't. Awesome!!!
Old 08-14-2009, 09:32 PM
  #11  
Senior Member
 
Vegas_AMG's Avatar
 
Join Date: Feb 2009
Location: Las Vegas
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
C63 & Mustang Mach1(s)
Yippee, no euro plate cover needed. Looks great. Tint yet??
Old 08-15-2009, 02:09 AM
  #12  
Member
Thread Starter
 
desmo996's Avatar
 
Join Date: Jul 2009
Location: Las Vegas
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
BMW 335i, Ducati 996, Mercedes C63 AMG
Ya guys it's definitely nice to know that these kind of options are available if you ever screw up your bumper or anything else that you wouldn't want to have to go to a body shop for.


Originally Posted by Vegas_AMG
Yippee, no euro plate cover needed. Looks great. Tint yet??
Thanks!
No tint yet. Called your guys and left a message to make an appointment for sometime next week. Do you think you'll be able to get away with the windshield tint? Is it very noticeable? I am considering this too.

Also have any idea how this tint affects the performance of radar detectors by any chance. I'm assuming if it 's ceramic based then it shouldn't disrupt anything? I have a V1 and definitely want it to work in this car.

Last edited by desmo996; 08-15-2009 at 02:15 AM.
Old 08-15-2009, 03:33 AM
  #13  
MBWorld Fanatic!
 
drawde's Avatar
 
Join Date: Feb 2009
Location: Northern NJ
Posts: 1,035
Likes: 0
Received 0 Likes on 0 Posts
2009 C63
I don't see how the stealership fixes that for $300 but charge me $2000 for some minor dings on my bumper.. (sorry don't mean to hijack https://mbworld.org/forums/c63-amg-w...-cost-fix.html)
Old 08-15-2009, 03:36 AM
  #14  
Member
Thread Starter
 
desmo996's Avatar
 
Join Date: Jul 2009
Location: Las Vegas
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
BMW 335i, Ducati 996, Mercedes C63 AMG
Originally Posted by drawde
I don't see how the stealership fixes that for $300 but charge me $2000 for some minor dings on my bumper.. (sorry don't mean to hijack https://mbworld.org/forums/c63-amg-w...-cost-fix.html)
Wow that is definitely out of line. Try looking into a local reputable PDR/Bumper repair business. That's basically what the dealer here is using.
Old 08-15-2009, 05:13 AM
  #15  
Senior Member
 
patboyy's Avatar
 
Join Date: Oct 2005
Location: Melbourne, Australia
Posts: 494
Likes: 0
Received 0 Likes on 0 Posts
C63 AMG
very nice
Old 08-15-2009, 10:26 AM
  #16  
Senior Member
 
Vegas_AMG's Avatar
 
Join Date: Feb 2009
Location: Las Vegas
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
C63 & Mustang Mach1(s)
Originally Posted by desmo996


Thanks!
No tint yet. Called your guys and left a message to make an appointment for sometime next week. Do you think you'll be able to get away with the windshield tint? Is it very noticeable? I am considering this too.

Also have any idea how this tint affects the performance of radar detectors by any chance. I'm assuming if it 's ceramic based then it shouldn't disrupt anything? I have a V1 and definitely want it to work in this car.
It is noticable 50% Pinincal F1. They have a clear option but with all the light coming through a much larger windscreen than I'm use to I wanted to take a chance. Well, if not its a $159 fix-it ticket and lessson learned.
Yes, it is ceramic based so s/b no issues with a radar detector. Note to self: time to buy one, this car is waaay too tempting.
Old 08-15-2009, 10:41 AM
  #17  
MBWorld Fanatic!
 
Sincity's Avatar
 
Join Date: Feb 2003
Location: Vegas and Vancouver, BC
Posts: 5,974
Received 16 Likes on 14 Posts
.
I need to see the tinted windshield.
Old 08-17-2009, 01:04 PM
  #18  
MBWorld Fanatic!
 
gsrjc's Avatar
 
Join Date: Aug 2005
Location: Maryland
Posts: 1,308
Likes: 0
Received 1 Like on 1 Post
2011 GLK350, 2010 ML350, 2008 C63 AMG
wow.. that looks pretty good
Old 10-15-2009, 01:40 PM
  #19  
MBWorld Fanatic!
 
eddieo45's Avatar
 
Join Date: Feb 2004
Location: Milton, MA USA
Posts: 2,901
Received 161 Likes on 134 Posts
me: 2015 SL400 & 2015 ML400; wife: 2022 GLC Coupe kid: 2017 GLC SUV
Originally Posted by desmo996
Wow that is definitely out of line. Try looking into a local reputable PDR/Bumper repair business. That's basically what the dealer here is using.
I thought PDR was all suction cups and vacuum? How do they use PDR to fill holes?
Old 10-15-2009, 06:25 PM
  #20  
Member
Thread Starter
 
desmo996's Avatar
 
Join Date: Jul 2009
Location: Las Vegas
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
BMW 335i, Ducati 996, Mercedes C63 AMG
Originally Posted by eddieo45
I thought PDR was all suction cups and vacuum? How do they use PDR to fill holes?
They don't use PDR to fix this kind of issue. What I meant is the dealer used a PDR related company who is capable of doing all kinds of small repair work on the spot.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: HOLES BE GONE!!!



All times are GMT -4. The time now is 08:42 PM.