ACG Tuning in Seattle!!! Jan 14-15th 2010!
#1
Thread Starter
Banned
Joined: Sep 2008
Posts: 1,694
Likes: 2
From: San Diego, CA
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
ACG Tuning in Seattle!!! Jan 14-15th 2010!
It has been set, I will be coming out to Washington a few days before MLK weekend!
All flashes will be completed on the spot, no shipping or waiting for your ECU to return.
for those who can not take the morning off, we can make arrangements for me to read the file prior, and I can have a file ready for you later that day.
A board member can also arrange a dyno session if this is something that you would like to have.
Give us a call to leave a small $200 deposit.
James@ACG
All flashes will be completed on the spot, no shipping or waiting for your ECU to return.
for those who can not take the morning off, we can make arrangements for me to read the file prior, and I can have a file ready for you later that day.
A board member can also arrange a dyno session if this is something that you would like to have.
Give us a call to leave a small $200 deposit.
James@ACG
#2
Sounds terrific, James!
A few questions:
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
2) Prices for each (feel free to PM me if you'd like)?
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
3.5) If there will by dynos involved, will the prices reflect that?
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
Thanks!
A few questions:
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
2) Prices for each (feel free to PM me if you'd like)?
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
3.5) If there will by dynos involved, will the prices reflect that?
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
Thanks!
#3
Sounds terrific, James!
A few questions:
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
2) Prices for each (feel free to PM me if you'd like)?
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
3.5) If there will by dynos involved, will the prices reflect that?
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
Thanks!
A few questions:
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
2) Prices for each (feel free to PM me if you'd like)?
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
3.5) If there will by dynos involved, will the prices reflect that?
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
Thanks!
I am thinking to do the K2...
#4
Thread Starter
Banned
Joined: Sep 2008
Posts: 1,694
Likes: 2
From: San Diego, CA
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
A few questions:
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
We can actually offer, a few different tunes, Obviously Kleemann and RENNtech, if you would like powerchip we can also offer that as well. We also have access to the Singh Autosport tune as well
2) Prices for each (feel free to PM me if you'd like)?
Kleemann $1495
RENNtech $3495
Powerchip $1990
depending on how many people we get signed up, that will dictate the discount level. I would need atleast 3 vehicles to tune to cover my cost.
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
these tunes are standard tunes as on the 6.3 AMG's there really is not advantage of a dyno tune unless you have more then the simply bolt on's.
3.5) If there will by dynos involved, will the prices reflect that?
If you would like a dyno, I have no problem doing that, I would simply read the files send them out while your vehicle is being strapped in. After the baseline, we would simply load the new tuned file and let her rip. Dyno fee will be the responsibility of the vehicle owner. As I do not work with any shops up in the pacific northwest.
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
I will be flashing these vehicles from my hotel room, unless we decide to dyno, then I can flash at the dyno facility as long as they are ok with it.
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
Not a problem, I would not want to leave Seattle until all customers are satisfied with the tune.
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
this tread is the sign up sheet, also please call to leave a small deposit.
Let me know if you have any more questions, happy holidays!
1) Which tunes will you be offering--Renntech, Kleemann, Powerchip, all of the above?
We can actually offer, a few different tunes, Obviously Kleemann and RENNtech, if you would like powerchip we can also offer that as well. We also have access to the Singh Autosport tune as well
2) Prices for each (feel free to PM me if you'd like)?
Kleemann $1495
RENNtech $3495
Powerchip $1990
depending on how many people we get signed up, that will dictate the discount level. I would need atleast 3 vehicles to tune to cover my cost.
3) Will these tunes be done with our cars on a dyno, i.e. an individually tailored tune? Or will it simply be an off-the-shelf "flash" tune?
these tunes are standard tunes as on the 6.3 AMG's there really is not advantage of a dyno tune unless you have more then the simply bolt on's.
3.5) If there will by dynos involved, will the prices reflect that?
If you would like a dyno, I have no problem doing that, I would simply read the files send them out while your vehicle is being strapped in. After the baseline, we would simply load the new tuned file and let her rip. Dyno fee will be the responsibility of the vehicle owner. As I do not work with any shops up in the pacific northwest.
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
I will be flashing these vehicles from my hotel room, unless we decide to dyno, then I can flash at the dyno facility as long as they are ok with it.
4.5) Reason why I'm asking #4 is: in case we get our ecu's flashed, and for some oddity the dynos only show minimal gain (say ~20hp or so), will you be able to fix the problems there on the spot so we wouldn't have to send our ecu's to you for fixing?
Not a problem, I would not want to leave Seattle until all customers are satisfied with the tune.
5) I can schedule myself off on Jan 14th, but that would be the only possible day. Is there a sign-up sheet or will there be plenty of time available?
this tread is the sign up sheet, also please call to leave a small deposit.
Let me know if you have any more questions, happy holidays!
#6
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
I'm in, looking for the Kleemann K1 and hoping there is enough interest to get the group a discount. I'll send a deposit once I'm home from vacation on Monday.
I'll talk to Carb Connection in Kirkland, WA about dyno time as well.
James, can you tell me how much time would it take in between runs to load the software?
Example. Pull up to the rollers, strap on, get a couple baseline dynos done . . . INSERT TIME HERE FOR UPLOADING NEW TUNE . . . get a couple post-tune dynos done.
Thanks!
I'll talk to Carb Connection in Kirkland, WA about dyno time as well.
James, can you tell me how much time would it take in between runs to load the software?
Example. Pull up to the rollers, strap on, get a couple baseline dynos done . . . INSERT TIME HERE FOR UPLOADING NEW TUNE . . . get a couple post-tune dynos done.
Thanks!
#7
4) Will your tune-site (if it hasn't been determined yet, no worries) have a dyno available so the option of dynoing the car after the tune can be available for us who wish to do so?
I will be flashing these vehicles from my hotel room, unless we decide to dyno, then I can flash at the dyno facility as long as they are ok with it.
I will be flashing these vehicles from my hotel room, unless we decide to dyno, then I can flash at the dyno facility as long as they are ok with it.
Hey, superlubricity, you had mentioned something about the possibility of setting up a dyno spot for that day? Is that a feasible option?
Edit: I posted this before I saw your post above mine. Haha.
Trending Topics
#8
Thread Starter
Banned
Joined: Sep 2008
Posts: 1,694
Likes: 2
From: San Diego, CA
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
I'm in, looking for the Kleemann K1 and hoping there is enough interest to get the group a discount. I'll send a deposit once I'm home from vacation on Monday.
I'll talk to Carb Connection in Kirkland, WA about dyno time as well.
James, can you tell me how much time would it take in between runs to load the software?
Example. Pull up to the rollers, strap on, get a couple baseline dynos done . . . INSERT TIME HERE FOR UPLOADING NEW TUNE . . . get a couple post-tune dynos done.
Thanks!
I'll talk to Carb Connection in Kirkland, WA about dyno time as well.
James, can you tell me how much time would it take in between runs to load the software?
Example. Pull up to the rollers, strap on, get a couple baseline dynos done . . . INSERT TIME HERE FOR UPLOADING NEW TUNE . . . get a couple post-tune dynos done.
Thanks!
If we are dynoing, I'd like to meet before hand to rip the files, so this way it will only take less then 5 minutes to load the file. Other wise, we will have to wait for the tune file to be emailed back to me from.
#9
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
#11
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
Here's the skinny on the dyno.
Type:
Dynojet Model 424xLC2. Will capture and datalog A/F Ratio, OBDII Data Stream, Horsepower and Torque which are all included with a baseline session (up to six runs).
Location:
Carb Connection
13611 NE 126th Pl. Suite 240
Kirkland, WA. 98034
(425) 820-1871
Date:
01/14/10
Time:
Start time TBD, but after James has had enough time to pull stock ECU files.
***Minimum of 5-cars needed for discount rates.***
Group Pricing:
1. superlubricity, 2010 C63 - Stock Baseline and Kleemann K1 Tune
2. avengerboater, 2010 C63 - Stock Baseline and Kleemann K1 Tune
3. BeltFedBob, 2005 SL55 - Baseline Only (Kleemann 168mm Pulley, Tune, Headers, Hi-flow Cats and 80mm Throttle Body)
Type:
Dynojet Model 424xLC2. Will capture and datalog A/F Ratio, OBDII Data Stream, Horsepower and Torque which are all included with a baseline session (up to six runs).
Location:
Carb Connection
13611 NE 126th Pl. Suite 240
Kirkland, WA. 98034
(425) 820-1871
Date:
01/14/10
Time:
Start time TBD, but after James has had enough time to pull stock ECU files.
***Minimum of 5-cars needed for discount rates.***
Group Pricing:
- Baseline pulls (no tuning on dyno) - $75 (Reg. price $145)
- Baseline/Tune pulls (with 5-10min delay for flashing the ECU) - $100 to $125
1. superlubricity, 2010 C63 - Stock Baseline and Kleemann K1 Tune
2. avengerboater, 2010 C63 - Stock Baseline and Kleemann K1 Tune
3. BeltFedBob, 2005 SL55 - Baseline Only (Kleemann 168mm Pulley, Tune, Headers, Hi-flow Cats and 80mm Throttle Body)
Last edited by superlubricity; 12-29-2009 at 10:07 PM.
#13
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
#16
Thread Starter
Banned
Joined: Sep 2008
Posts: 1,694
Likes: 2
From: San Diego, CA
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
If we get 5 guys, we can offer a 5% discount, if we get 10 I'll offer 10% off On any of the tunes.
I will be flying in on Wednesday Evening, and would like to meet with you guys if possible to read the ecu's. This way I'll have your tuned files by the morning and will help expedite the dyno process.
I will be flying in on Wednesday Evening, and would like to meet with you guys if possible to read the ecu's. This way I'll have your tuned files by the morning and will help expedite the dyno process.
#18
I already have the K1 installed now for over 2 months and would love to be their to compare Dyno numbers, but I will be out of town on Business, BUMMER.... I have to say I am very happy so far the Kleeman K1 but I am still pondering the K2 but am a littel afraid of the extra noise after doing the headers and cats. Some people say its ok noise wise and others say its too noisy???? I wish you guys all the best of luck and hope you guys post the DYNO numbers when you are done.
Happy Holidays.
Happy Holidays.
#19
If we get 5 guys, we can offer a 5% discount, if we get 10 I'll offer 10% off On any of the tunes.
I will be flying in on Wednesday Evening, and would like to meet with you guys if possible to read the ecu's. This way I'll have your tuned files by the morning and will help expedite the dyno process.
I will be flying in on Wednesday Evening, and would like to meet with you guys if possible to read the ecu's. This way I'll have your tuned files by the morning and will help expedite the dyno process.
#23
#24
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
I already have the K1 installed now for over 2 months and would love to be their to compare Dyno numbers, but I will be out of town on Business, BUMMER.... I have to say I am very happy so far the Kleeman K1 but I am still pondering the K2 but am a littel afraid of the extra noise after doing the headers and cats. Some people say its ok noise wise and others say its too noisy???? I wish you guys all the best of luck and hope you guys post the DYNO numbers when you are done.
Happy Holidays.
Happy Holidays.
I'm also thinking about headers but I really want to hear them in person before making a move. I don't want to wake the neighbors every morning and I don't want any in-cabin drone.
I'll be posting a TON of information after the dyno runs.