Evosport | New Lightweight 2-Piece Front & Rear Rotors for C63
07-22-2010, 04:46 PM
#76
Super Member
Join Date: Nov 2009
Location: Montreal, Canada
Posts: 690
Likes: 0
Received 1 Like
on
1 Post
2021 Taycan Turbo, 2018 Radical SR3, 2021 Lincoln Aviator
Love the rotors on my car. Did you guys try carbotech pads yet? Looking into the XP8 and XP10 compounds.
The stock/clk63 pads are ok but they cooked on my last lapping day...
The stock/clk63 pads are ok but they cooked on my last lapping day...
07-22-2010, 09:29 PM
#77
MBWorld Fanatic!
Join Date: Jul 2004
Location: 43°38'N / 79°52'W
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
EuroCharged 2012 C63 BS Coupè
08-29-2010, 09:43 AM
#80
MBWorld Fanatic!
Join Date: Jul 2004
Location: 43°38'N / 79°52'W
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
EuroCharged 2012 C63 BS Coupè
No message. Just some fade later in the afternoon sessions. Not to serious. Did a visual the day after and expected to see some Glazing but the Front Pads were cracked all the way through in 4 or 5 spots on each pad. Rears were only a little Glazed with no cracks.
Had a spare set of OEM front pads so I replaced them and back to the track a few weeks ago with no issues. Just some minor glazing. Hope they last the 2 or 3 sessions I have left this season....
Think I will try Porterfield R4S Pads all around when I put on fresh rotors next spring (Evosport's again of course....)
Had a spare set of OEM front pads so I replaced them and back to the track a few weeks ago with no issues. Just some minor glazing. Hope they last the 2 or 3 sessions I have left this season....
Think I will try Porterfield R4S Pads all around when I put on fresh rotors next spring (Evosport's again of course....)
Last edited by NORTH 44 C63; 08-29-2010 at 09:48 AM.
09-02-2010, 04:34 AM
#85
Member
Join Date: Jan 2010
Location: UAE-AD
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
c63
09-03-2010, 11:54 AM
#89
PREMIER SPONSOR
Join Date: Nov 2001
Location: Huntington Beach, CA
Posts: 2,922
Likes: 0
Received 0 Likes
on
0 Posts
None fast enough!
Yes, we have pads, rotors, stainless lines, this is no problem.
feel free to contact me or our sales staff and we can get it set-up.
Rotors are $1999
Lines are $299
Pads are to spec (a few options).
Thanks
Brad
feel free to contact me or our sales staff and we can get it set-up.
Rotors are $1999
Lines are $299
Pads are to spec (a few options).
Thanks
Brad
03-04-2011, 06:47 PM
#98
Senior Member
Join Date: Aug 2006
Location: S. Florida
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
GT3
I have run the Carbotech pads XP10/8 on an RS4 and they were amazing. Im thinking of getting a set for the C. He sells some purple goo that keeps the squealing to a minimum. Be sure to coat the leading and trailing edge of the pad plates. They rub the caliper there and create quite a bit of noise from that location.
03-29-2011, 08:48 PM
#100
MBWorld Fanatic!
