ACG Build: C63 Weistec Stage 2
#451
MBWorld Fanatic!
Holy crap, that is a thing of beauty!! ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
Congrats on getting the car to where you want it to be Jim.
Props to Weistec and ACGSD for doing a fantastic job, this thing is throwing down some scary numbers.![Scared](https://mbworld.org/forums/images/smilies/scared.gif)
Now throw on some M/T's in the rear and lets see what this does on the track!
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
Congrats on getting the car to where you want it to be Jim.
Props to Weistec and ACGSD for doing a fantastic job, this thing is throwing down some scary numbers.
![Scared](https://mbworld.org/forums/images/smilies/scared.gif)
Now throw on some M/T's in the rear and lets see what this does on the track!
Last edited by _AMG_; 08-13-2011 at 04:18 AM.
#452
MBWorld Fanatic!
#453
MBWorld Fanatic!
The original plan all along was to drive the car in the middle of August so yes. I leave Rome this wed and am heading out to the West Coast to grab the car and head to Vegas for some racing. I fly out again on Sunday so will be looking to get as much driving as possible! Are you going to join us in Vegas?
#455
MBWorld Fanatic!
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 2,949
Likes: 0
Received 0 Likes
on
0 Posts
2008 A8L, 2002 996TT X50, 2009 X5
Comp series makes sense to consider, if they'll be custom-widths and offsets (vs. normal C63 fitment ranges) due to the widebody kit. Big fan of the C93, but the C97 would look great as well.
#456
MBWorld Fanatic!
James and Weistec are the ones doing all the work that is getting us all to this point
I have some videos of the car but I need to edit them. The videos are only on the dyno. I am scared to make a street video lol
No problem on the wheels. We just need to decide between HRE, DPE or ADV1. I'll e-mail you some ideas.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
No problem on the wheels. We just need to decide between HRE, DPE or ADV1. I'll e-mail you some ideas.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#457
MBWorld Fanatic!
Sry guys but this is sick.
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
Last edited by mthis; 08-15-2011 at 01:54 PM.
#460
MBWorld Fanatic!
Sry guys but this is sick.
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
"Song" sucks though...
#463
MBWorld Fanatic!
Sry guys but this is sick.
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
Jim you should do this to u c63 pls dont crush it.
http://www.youtube.com/watch?v=BoEKWtgJQAU
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#469
MBWorld Fanatic!
Looks like that X pipe is made to work specifically with MBH headers.
Im sure there is a way to make it work with MHP Headers, as long as the piping diameter is the same and all the necessary steps are taken to make it fit.
Im sure there is a way to make it work with MHP Headers, as long as the piping diameter is the same and all the necessary steps are taken to make it fit.
#471
Former Vendor of MBWorld
We offer 2 types of x-pipes. One for OEM systems and one for our mid-section. Will it work on other systems? I guess anything is possible and I'm sure it could be done. But it might take some work on the end users end.
#473
Senior Member
Join Date: Jun 2011
Location: San Diego
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
C63, C300, 911TT x 3, 911 C2 x 2, 911SC, SL65, SL500, 280SL Plus some trucks
The car is sitting in a bodyshop getting a widebody. Don't know schedule. Then it has to go to paint. HREs are on order. Don't know schedule. Brakes are on order. Don't know schedule. Interior has been redone. Last piece from MACarbon is supposed to be delivered today but haven't confirmed. Lots of assembly work will need to be done with a fair amount of electronics required before SEMA. Then it comes back for substantial ICE system that has to be custom made with lots of aluminum and CF work. Don't know schedule.
The car has to be on a transport in 3 weeks. I have my doubts. If it makes it, ok. If not, I've solved the tax implications and it can get finished whenever. After SEMA and CES, the car goes into storage for 3 years and then it leaves. If it misses SEMA, it leaves when its done.
Jim
The car has to be on a transport in 3 weeks. I have my doubts. If it makes it, ok. If not, I've solved the tax implications and it can get finished whenever. After SEMA and CES, the car goes into storage for 3 years and then it leaves. If it misses SEMA, it leaves when its done.
Jim
#474
Senior Member
Join Date: Jun 2011
Location: San Diego
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
C63, C300, 911TT x 3, 911 C2 x 2, 911SC, SL65, SL500, 280SL Plus some trucks
In all of this, 3 outside vendors have performed flawlessly on their custom work.
1. Weistec. Couldn't be happier. I say this is custom work because it is. If you think you reach this level of power with off the shelf, bolt in on in your garage solutions, you are wrong. Weistec offers solutions like that. This wasn't one of those. Again, couldn't be happier.
2. Jims Upholstery in San Diego. Completely custom leather interior in a couple of days. Not weeks, not months, DAYS.
3. HRE Getting ready to order my 4th set of wheels from them within 4 months. They bobbled the first set schedule by a week but did a diving catch and saved it. Flawless on the next 2 sets.
ACG has done pretty well. This particular job has its drawbacks mostly because of outside vendors. I'm dumbfounded at the work ethic of this industry. Not in a good way. Its also true that I had ACG doing 3 of my cars at the same time and they still have 2 of them in their shop right now getting BIG things done and as soon as one pops out this week I will be taking 2 more in between October 10th and November 1st.
ACG could use a project manager or Peter should spend a weekend with me, Microsfot Excel and Microsoft Project. He's also too nice by far to people. Including me.
While I seemed to be royally pissed at them early, I like them fine. They need to be less nice and a bit sharper on hitting punch lists on VERY large projects. I forget half of what has to be done to these cars and I'm the one spec'ing them and paying the bills.
ACG will get their top of the line Mustang Dyno which should solve most of their issues as they relate to what I was concerned about and give them more time to do project management instead of spending days driving back and forth across the county to the dyno to check their work.
For those that can go and want to see their dyno, its the uber cool one that Mustang will be displaying at their booth in SEMA. After SEMA, it gets trucked to ACG.
That's the owner's report. TTYL, I have work to do.
Jim
1. Weistec. Couldn't be happier. I say this is custom work because it is. If you think you reach this level of power with off the shelf, bolt in on in your garage solutions, you are wrong. Weistec offers solutions like that. This wasn't one of those. Again, couldn't be happier.
2. Jims Upholstery in San Diego. Completely custom leather interior in a couple of days. Not weeks, not months, DAYS.
3. HRE Getting ready to order my 4th set of wheels from them within 4 months. They bobbled the first set schedule by a week but did a diving catch and saved it. Flawless on the next 2 sets.
ACG has done pretty well. This particular job has its drawbacks mostly because of outside vendors. I'm dumbfounded at the work ethic of this industry. Not in a good way. Its also true that I had ACG doing 3 of my cars at the same time and they still have 2 of them in their shop right now getting BIG things done and as soon as one pops out this week I will be taking 2 more in between October 10th and November 1st.
ACG could use a project manager or Peter should spend a weekend with me, Microsfot Excel and Microsoft Project. He's also too nice by far to people. Including me.
While I seemed to be royally pissed at them early, I like them fine. They need to be less nice and a bit sharper on hitting punch lists on VERY large projects. I forget half of what has to be done to these cars and I'm the one spec'ing them and paying the bills.
ACG will get their top of the line Mustang Dyno which should solve most of their issues as they relate to what I was concerned about and give them more time to do project management instead of spending days driving back and forth across the county to the dyno to check their work.
For those that can go and want to see their dyno, its the uber cool one that Mustang will be displaying at their booth in SEMA. After SEMA, it gets trucked to ACG.
That's the owner's report. TTYL, I have work to do.
Jim
#475
MBWorld Fanatic!
Looking forward to the final result, and cannot imagine missing a primary purpose: SEMA
Questions if you don’t mind:
Why would the car go into storage for 3 years?
Where exactly does "Leave" put the car?
I sense some continued frustration, and given the events of the past can understand, but I think everyone has best intensions. I want to see a finished car, and would like to see it used, vs. Storage How was your trip to China?
Questions if you don’t mind:
Why would the car go into storage for 3 years?
Where exactly does "Leave" put the car?
I sense some continued frustration, and given the events of the past can understand, but I think everyone has best intensions. I want to see a finished car, and would like to see it used, vs. Storage How was your trip to China?
Last edited by Bramage; 10-05-2011 at 11:20 AM.