CF Mirrors
So I just ordered and received my CF mirrors. I have the one's here
http://www.ebay.ca/itm/121137974525?...84.m1497.l2649
My understanding was that all I need to do is put double sided tape on them and that should be good enough. I am reading some of the things here that are talking about screwing this and that so I am really confused now.
Can anyone help me with this? I tried the tape method and the thin middle parts that are between the LED lights won't stick to the mirror for some reason. As if the tape's adhesive isn't strong enough. And there's a groove in the mirror cover that I don't think allows the tape to make full contact with the actual mirror.
Some tips for install would be great as it's just sitting there half stuck and half un-stuck on the mirror!
Maybe I just need a stronger double sided tape....I don't know. If that's the case perhaps someone can point me towards the strongest one I can get....help.
Last edited by papashango; Aug 7, 2013 at 12:30 AM.




You can use a hair dryer on high heat to get the glues from the tape to release. After you glued each prong with the 3M double-sided tape you have to let the tape cure for about a day.
Remember the most important thing is to clean the surface of the mirror very well with 70 or 90% rubbing alcohol to remove any oils or any deposits so the double-sided tape can stick.
Another member here posted his expeirences with these mirror covers:
https://mbworld.org/forums/c63-amg-w...tallation.html
https://mbworld.org/forums/c63-amg-w...rs-beware.html




Now that I have them and can't do anything with them I might as well use them I guess? Can anyone post a link to the extra strength 3M tape that would work?
Thanks
The Best of Mercedes & AMG





