Dads C63

Looks incredible!! CONGRATS on the build!!
Will the wheels be available soon?
Hope to see some videos from the airport event.

Steve - can you please email me some information about the heat exchanger for road racing if it will work on a N/A engine or is it designed for just supercharged cars?

THANK YOU!!

Kaiba

Not a fan of all the engine modifications but the wheels are just gorgeous.

Makes me want to order the SLS BS ( same design ) wheels to try if they fit.

Dads C63

SLS wheels won't fit the "C" class at all.
Fronts are 19 x 9.5" with a +60 offset.
Rears are 20 x 11 with a +68 offset.

jrcart

I ordered my SLS BS last night. Early July build date, should be delivered early August.

590 Mars Red
611 Black Series Interior - Two Tone Blk/Red
P70 *Black Series Telematics Package
0 P70 *Black Series Telematics
0 218 Rearview Camera
0 234 Blind Spot Assist
0 255 AMG Performance Media
0 359 *mbrace - w.trial period by Hughes Telem
0 512 COMAND w/Navigation and Voice Control
0 518 iPod/MP3 Media Interface
0 536 *SiriusXM Radio w. 6 mos. service
5 049V *MP3 Media Interface Cable
658 *AMG 19/20" Black Series Forged Wheels- Matte Black

Pufftrees

O MY LORD, im stoked for you haha. Congratulations on your purchase!

jrcart

Thanks Keith, the exterior is turing out beautiful however the real impressive stuff is under the hood and the trans and oil cooling mods and a few other things Weistec developed. I anticipate Wesitec will be releasing all of the details in the very near future.

Jycke

Congrats on the order! I too wanna be loaded

Kaiba

So I'll only look at them on my SLS BS then

Blown63

My god, those wheels are sexy, lets not start with all the mods! Nice work! Are you going to bring any of your beasts to the 1/2 mile event out in Monee, IL? I would love to see one of them in action! Good luck


x2

jrcart

As a matter of fact I am registered for the Wanngofast event in June. I only entered the CLK in that event, why bring out a car with a mere 800 hp when I have one with over 1000?

I am actually running both cars in the no Fly Zone Airstrip 1/2 mile event out in California this Saturday. Just using it for a shakedown for this white car before I have it shipped home.

Kaiba

No B&O ? Looks like a must have in a SLS. All your options are standard in France. I added the wheels , B&O and full carbon exterior/interior. Your color choices can look great !

Nice stable you gonna have I went the porsche route on the uber cars. Let us know how the C goes on a race track ( not drag race , that doesnt matter in eu ) with all that power

Again , killer look on the wheels !!

jrcart

Only options in the US are matte black wheels, B & O and matte paint or Solarbeam paint, everything else is standard in the US including carbon package. No need for a B & O, I buy my cars to drive and track, if I wanted to listen to music I would stay home and listen in my home theater. The stock radio system will be just fine.

JamE55

Jim,

What's the projected HP figures on the Weistec C63BS Stage 3? Congrats on the SLS BS. Your collection is coming out nicely. Silver CLK63 BS, White C63 BS and Mars Red SLS BS. Hope you do a photoshoot of all 3 of them once you're done.

jrcart

Nothing too off the wall, it is sitting just above 660rwhp right now. I can play around with different pulleys and bump that figure up and might do so for the airstrip event this weekend. I will most likely just keep it at the 660rwhp for daily use and road course track duty. Should be enough to have fun with and spank pretty much anything I run up against.

Pickles

Sounds good to me, & congrats on the SLS B.S. order.....you have a lovely "collection".
I did ask, in an earlier post, as we say in "Aussie" terms, "What do you do for a dollar"?......because it's obviously working out well for you!
Cheers, Pickles.

DLSJ5

Incredible car Jcart, Weistec has done an oustanding job on these kits, would be fun to run your car one of these days. Eventually I'll get a chance to run Josh's Weistec Stage 3, we ran when he was Stage 2, should be another fun set of runs. Best of luck this weekend.

yazid

OMG!!! MONSTER!!!
You must really love the Weistec builds as you have it now on both AMG's!
Congrats again on the build for the C63BS.. nice wheels jrcart!
Now the SLSBS is gonna be interesting if you're gonna put an SC on it.. hehe

Blown63

Good luck at that event please post some videos/pics! I thought I saw your CLK but it was an older picture so I wasn't sure if it was you or not, your still running the RAM hood right? because the picture that was sent in for the event didn't have that hood installed. What day will you be there? Looking forward to see your monster.

350driver

Did your dealer by chance give you any idea what the MSRP on the car was? Were they going to charge a mark-up on it? The dealers I have spoken to locally still don't have any info, but they all have said they are charging a "market adjustment" on the cars; I have been told $20K to $50K.

jrcart

I am paying MSRP, I buy a lot of cars from my dealer, they don't try to gouge me. Price is $290ish plus gas guzzler tax and options. Your dealer should have info official dealer order guide was released two plus weeks ago. They are all already accounted for, if you are not on a list already you are not getting one. Mine wil be one of the first US models produced, if not the first I was told by AMG corporate execs.

GeorgeSmooth

Congrats jrcart. I have been driving around with the 55mm pulley for the past few days and I can see what the fuss is all about. That C63BS must be the ultimate package for a do it all car.

503C43 ////AMG

You sir are my HERO! Not only will you own every bad *** BS but you are taking them to the next level with tasteful and functional mods.

I can't wait to see pics of your SLS BS.

When I grow up I want to be jrcart

Merc63

Please please send me some videos !!!!!

Is 55mm stage 3 pulley?

C63fan

Wheels are insane! Plus pilot sport cup tires! WooooooW!

Merc63

Weistec, was the tranny built on this car?