HRE p101
Am thinking of gettin these wheels, i would like to know the best rim width and offset i can go for in 19s, for a 2012 coupe p31 not lowered and would be using 245x35 and 275x30 without any rubbing issues and close to stock stance , since am not lowered ( completely stock ) so it doesnt look awkward .
Will be running RE-11 if that helps .....
Also are the p101 better than the s101 ?
Thanks
19x10 +52 Rear.
You can run 245's and 275's without rubbing.
I do this fitment all day on HRE's, ADV's, Forgestars.... etc. No issues even dumped.



Let me know if you want some pricing with tires mounted and balanced.
The S101 are a 3 piece wheel, versus the P101 which are a forged 1 piece monoblock.
Personally I like the simplicity of the P1 series. Very clean looking and would compliment the W204 coupe very nicely.
But we have also done S101's on a well known C63 Black Series and it looks bonkers as well
Last edited by Girard@ACGautomotive; May 20, 2014 at 05:41 PM.
Yea i also think the p 101 is cleaner looking but looks like the s101 has deeper concavity and the p has none
Trending Topics
I was perfectly happy with the customer support Tal provided.
I didn't spend much money at all (yet) and received multiple follow up's to ensure I was satisfied with my purchase.
The Best of Mercedes & AMG
Excellent looking car u got there
As much as i want to lower the car, the terrain here isnt good for lowered cars , i wish i could do the lowering myself, if i dont like it, i raise it back up, thats one of the reasons am trying to go with a setup that wont make it look like a 4x4 at the end of the day like brabus wheels do if not lowered
So with 9f +40 and 10f +50 , i will sit pretty much like stock with the 245 and 275 tyre options, goin with re11 no more pss, i need the stiff sidewall ?
Plus, ACG is not a direct retail or distributor so their pricing -- assuming they do it legitimately instead of how they used to do it -- will not even be as close to being competitive as it would with Wheel Enhancement, Wheels Boutique, HG Motorsports, etc.
OP if you want to get the best fitment information for you car, hit up:
CarolineC@hrewheels.com or TitoR@hrewheels.com
@Autosport7....... Thank you for your input.....
I don't think you can go wrong with a 10" or a 9.5" wide wheel. All in what you are looking for.

my next worry is headers to complement my tune
Mercedes Benz C63 on ADV5.0 TF by wheels_boutique, on Flickr
C63 AMG on Vorsteiner VS-110 by wheels_boutique, on Flickr
Mercedes Benz C63 AMG on HRE P40SC by wheels_boutique, on Flickr
Mercedes C63 AMG on 19" HRE FlowForm ff01 by wheels_boutique, on Flickr
Vorsteiner/Wheels Boutique Photo & Video Shoot by wheels_boutique, on Flickr
Mercedes C63 AMG on HRE P47SC by wheels_boutique, on Flickr
White C63 on Gloss Black Vorsteiner VS160 Wheels by wheels_boutique, on Flickr
HRE P44SC Brushed Red on Fish's C63 AMG by wheels_boutique, on Flickr
C63 AMG on Vorsteiner VS-160 Rims - Outdoor Photo Shoot by wheels_boutique, on Flickr
Mercedes C63 on HRE P45S wheels by wheels_boutique, on Flickr.
With all of that you can do 19x9 front and 19x10 or 19x10.5 (Using our offsets) in the rears. Feel free to contact me direct at 786-522-7388.
Last edited by AlbertWB; May 21, 2014 at 02:03 PM.
Excellent looking car u got there
As much as i want to lower the car, the terrain here isnt good for lowered cars , i wish i could do the lowering myself, if i dont like it, i raise it back up, thats one of the reasons am trying to go with a setup that wont make it look like a 4x4 at the end of the day like brabus wheels do if not lowered
So with 9f +40 and 10f +50 , i will sit pretty much like stock with the 245 and 275 tyre options, goin with re11 no more pss, i need the stiff sidewall ?
My set up is stretching the tires a bit which looks good & aggressive lowered, but at stock height, it will make ur wheel gap higher.
https://mbworld.org/forums/4190827-post2.html





